BT Scanner User manual

PaperJet 55E

Plain Paper Fax, Copier, Scanner,

Colour Printer and Telephone

User

Guide

This product is intended to be connected to analogue

networks and private switching systems in the

United Kingdom.

This product has not been designed for making emergency

telephone calls when the power fails. Alternative arrangements

should be made for access to emergency services.

2

12 Month guarantee

FOR ASSISTANCE CALL THE HELPLINE ON

0870 240 8026 quoting the model and serial number

1. In the event that the Helpline is unable to resolve a

problem over the phone, the following will apply:

I. The Helpline will require the customer to provide

details of where the BT PaperJet was purchased,

date of purchase and method of payment.

II. If the fax was purchased within 28 days a brand

new replacement BT PaperJet will be despatched by

courier to the customer

III. If the product was purchased more than 28 days

ago and within the guarantee period, a ‘loan’

BT PaperJet will be despatched by courier to the

customer.

2. If 1 (III) applies, the original fax will be repaired

free of charge subject to the conditions in clause 5.

BT’s normal repair times for most faults is 14 days.

If the fax is beyond economical repair we will

replace it with a brand new BT PaperJet. On

completion of repair the customer will be contacted

and given the option of the return of the original

repaired fax and free collection of the loan fax or at

the customer’s choice retention of the loan fax.

3. A new or loan fax will be delivered by courier. If a

Helpline call is received by 4pm we can arrange an

overnight courier, but will agree a delivery time

with the customer. On delivery of the new loan or

repaired fax as appropriate, the customer must

promptly replace it in the box with the faulty fax or

loan fax to enable the courier to return the fax to

BT.

4. If the customer decides to retain the loan fax the

balance of the original guarantee will transfer to

this fax.

5. This guarantee does not cover the fair wear and

tear or accidental damage or damage caused by

improper installation. The guarantee will not apply

if upon inspection it is established that

unauthorised repairs or modifications have been

made to the fax.

In such circumstances the Customer will be sent a

condition report with a choice of either (a) paying

the cost of repair of the faulty fax or (b) the

carriage charges incurred in having the original fax

returned unrepaired and the loan fax collected

6. The liability of BT under the terms of the guarantee

is limited to the exchange of the fax or the repair

and return of the original fax

7. Excluded from this guarantee are accessories,

consumables, eg ink cartridge.

8. This guarantee applies to the original customer

only and is not transferable.

9. This guarantee does not affect the customer’s

statutory rights.

3

At a glance

Document outlet

Outlet for received faxes, copied

documents and originals.

Display screen

Control panel

Document feeder

width guides

Adjust to fit the width

of your document for A4,

Letter and Legal sizes.

Document feeder

Holds up to 15 sheets placed face

down for faxing or copying.

Paper feeder width guide

Adjust to fit the width of your

paper for A4, Letter and Legal

sizes.

Plain paper sheet feeder

Max. capacity 80 sheets of

80gsm paper.

Paper support

Handset

Telephone line socket

Cover

Open the cover

for changing the

print cartridge

and clearing

document jams

Loudspeaker

4

Reduction/Enlargement button. Reduces and

enlarges copies to either 70% or 140%.

Resolution button. Allows you to choose text or

photo resolution for copies.

Contrast button. Adjusts the contrast of

documents to be copied.

Copy button. Press to start copying a document.

Error light. Indicates a problem when sending or

receiving a fax.

Stop button. Stops the current operation.

Returns the fax machine to standby.

Monitor button. Press to get dialling tone.

Start button. Press to send a fax. Confirms an

option chosen from the menu. During a call, press

to receive a fax.

Function button. Function button lets you select

options from the menus.

RX Mode/Hold button. Selects reception

methods for faxes. When on a phone call, press to

put a caller on hold. They hear a beep.

Resolution/Volume – button. Adjust the

resolution of documents to be faxed. Select next

option from a menu.

Decrease loudspeaker volume

Contrast/Volume + button. Adjust the contrast

of documents to be faxed. Select previous option

from a menu.

Increase loudspeaker volume

Recall button. For use with switchboards and BT

Select Services.

Speed Dial/Clear button. Used to speed dial a

stored number. Deletes incorrect settings and

characters.

Last Number/Pause button. Press once to

display last number dialled. If you have a

document in the document feeder it shows the last

fax number, if not it shows the last telephone

number called. Press again to dial the number

displayed. When dialling or storing a number,

press to enter a pause.

External button. Connects you to an outside line

when connected to a switchboard.

5

Cartridge holder

Optical scanner

Socket for PC cable connection

6

Key features

Plain paper fax

Holds up to 80 sheets of A4 paper for ink

jet quality printing.

21 page memory

If you run out of ink or paper while

receiving a fax the document will be stored

in the memory and automatically printed out when

the new paper or ink has been added.

Copier with zoom

Make single or multiple copies of

documents. Enlarge copies to 140% or

reduce to 70%

One touch and speed dial memories

10 one touch memories and 32 speed dial

memories can each store a fax number,

phone number and name. Easy to display and scroll

through the memories.

Mono/colour printer for PC

Print documents from your PC.

Interchangeable black and colour

cartridges let you print in colour whenever required.

IMPORTANT

To print from your PC

A Bi-directional parallel printer cable is required.

To print in colour, a colour ink cartridge is

required. These items are not supplied with the

machine and must be purchased separately.

7

In this guide

12 Month Guarantee 2

At a glance 3

Key features 6

Introduction 8

Safety information 9

Setting up 10

Using your PaperJet 55E 16

Sending faxes 16

To broadcast a document 20

Using the one-touch memories 22

Using the speed-dial memories 23

Reports and lists 25

Making and receiving phone calls 27

Copying documents 29

Additional features 30

Polling 34

Caller display 36

Connecting to a switchboard 37

Help 39

Maintenance 44

Technical information 49

Index 51

8

Introduction

For your records

Date of purchase:

Place of purchase:

Serial number (on base of unit):

Proof of purchase is required for warranty purposes,

so please keep your receipt.

Unpacking your PaperJet 55E

When you unpack you should have:

PaperJet 55E with attached

mains power cable and

fitted 3-pin plug.

Telephone line cord

Starter print cartridge

Handset with cord

Paper support

CD with PaperJet 55E/65E

PC software

PaperJet 55E/65E PC Printing Guide

Cartridge storage container

The following items are not included with your

PaperJet 55E but are required for PC printing and

printing of colour documents

Printer cable

Colour cartridge

NOTE

Using the PC print facility

Please refer to the separate PaperJet 55E/65E PC

Printing Guide.

Never put foreign bodies into the fax machine.

Their accidental contact with powered parts may

cause a fire or electric shocks.

Do not expose to direct sunlight.

Do not stand your fax machine on carpets or other

surfaces which generate fibres, or place it in

locations preventing free flow of air over its surfaces.

Do not submerge any part of your fax

machine in water and do not use it in damp

or humid conditions such as bathrooms.

Do not expose your fax machine to fire,

explosive or other hazardous conditions.

There is a slight chance that your fax

machine could be damaged by an electrical

storm. We recommend that you unplug the

power and telephone line cord for the duration of

the storm.

9

Safety information

10

Setting up

1 Plan the location of your PaperJet 55E

Place your PaperJet 55E on a stable, flat surface.

Make sure it is close enough to the telephone and

mains power sockets so that cables will reach.

Remember to leave enough room at the front of the

machine for documents to come out. Allow a free

flow of air around the machine for ventilation.

2 Fit the paper support

Fit the plastic support into the slot at the back of the

machine. Ensure it clicks firmly into place.

3 Connect the handset

Click into position

Plug the handset cord into the socket marked

at the back of the machine.

Place the handset in the cradle.

4 Connect the telephone line cord

1 Plug the telephone line cord into the socket

marked LINE at the back of the machine.

2 Connect the other end to the telephone wall socket.

12

11

6 Load paper

The plain paper sheet feeder can hold up to 80 sheets

of 80gsm paper.

It can accommodate A4 (210 x 297mm), US Letter

(216 x 279mm), and US Legal (216 x 356mm) and

weights between 70-90gsm.

Place the paper in the sheet feeder. Do not force it in.

Use the paper width adjustment lever to push the

paper against the left side of the feeder.

Maximum Level

NOTE

When you need to add more paper, always slide it

under the paper that’s already loaded.

IMPORTANT

Before connecting your PaperJet 55E to your PC,

complete these setting up instructions.

IMPORTANT NOTE

Before connecting to the mains power remove the

red tag marked “REMOVE before plugging in” by

pulling in the direction of the arrow.

5 Connect the mains power

Plug into the mains power and switch on.

The fax will automatically carry out a short test to

check the functions of its components and the

following messages will appear in the display:

AUTOMATIC RX

CHECK PRINT HEAD

and alternating

SET DATE/TIME

12

When you connect the fax machine to the

power supply, and following any

interruption in the supply you will need to

set the date and time as described below.

The display shows:

DATE AND TIME

The display shows:

FORMAT: DD/MM/YY

If you want to select a different format from

the one displayed, press the / keys.

The display shows:

FORMAT: 24 H

If you want to select the other time format

(12-hour), press the / keys.

The display shows:

DD/MM/YY HH:MM

01-01-02 00:00

Enter the new date and time (e.g. 26-07-02;

12:00). As each digit is entered, the cursor

will move to the next one.

DD/MM/YY HH:MM

26-07-02 12:00

If you only want to change a few digits,

move the cursor to them using the < > keys

and overwrite them with the correct digits.

To confirm the setting. The procedure for

setting the date and time is complete. The

new date and time will be updated

automatically and will be printed on each

page sent.

To return the fax machine to stand-by

mode.

7 To set the date and time

NOTE

If you have selected the 12 hour clock the letter p

from pm or a for am is displayed. To display the

correct p or a setting press the function button

when the cursor is flashing on the p or a. Press the

clear button to delete entries.

NOTE

Remember that the stand-by mode is the status in

which it is idle and that it is the mode from which

the machine can be programmed.

/

13

8 Install the starter print cartridge

Open the printer compartment cover.

Remove the print cartridge from its packaging.

Holding it by the finger grip, peel the protective film

from the print nozzles.

Avoid touching the nozzles and metal electrical

contacts.

Insert the cartridge into the holder with the

electrical contacts facing towards the front of the

machine.

Pull the cartridge towards the front of the machine

until you hear it click into position.

Close the cover.

If the display continues to show

CHECK PRINT HEAD

the cartridge may not be installed properly. Open

the cover and check that the cartridge is correctly

orientated and clicked into position.

Should the message persist, you may need to clean

the electrical contacts and the carriage (see ‘To clean

the cartridge and nozzles’, page 46).

NOTE

To replace the cartridge when it runs out of ink,

follow the instructions in the Maintenance Section

on page 44.

14

9 Automatic print quality test page

Your PaperJet 55E automatically cleans the

print nozzles and prints a test page.

Once printed, the display shows

CHECK PRINT OUT

1=EXIT 0 = REPEAT

The printed sheet contains the following:

a

numbered scale, to check ink flow and

the electrical circuits on the print head.

a set of

graphics and text to assess print

quality.

Check the numbered scale

for interruptions

and the black areas for horizontal white

lines. If none are present, the print head is

installed correctly and working normally.

Press

1 if the test print is acceptable.

Or

Press 0 to repeat the test.

If there is still a problem after printing three

test pages try:

changing the paper you are using, it may be

too porous.

removing and re-installing the print cartridge.

cleaning the electrical contacts and print

nozzles (see

‘To clean the cartridge and

nozzles’, page 46).

replace the cartridge.

•

For example to enter the name JOHN:

Press the

5 button until the display shows

J

.

Press

>

Press the 6 button until the display shows

O

.

Press

>

Press the 4 button until the display shows

H

.

Press

>

Press the 6 button until the display shows

N

.

10

Enter your name and fax number

Your name and number will be added to

every fax page you send. You can enter a

maximum of 16 characters and 20 digits.

Press the

Function button until the display

shows

INSTALLATION

Display shows

TEL. LINE SET-UP

Press twice. Display shows

STATION NAME

Display shows

TYPE YOUR NAME

Press the buttons to enter your name up to a

maximum of 16 characters, as shown below.

Press buttons to move the cursor

to the character you want or to insert a

space.

Press the

✱

and

#

buttons to enter different

symbols such as ‘&’.

Press the

Clear button to delete entries.

A-Z

15

11

To set the position of your fax header

Your name, fax number, date and time can

be shown at the top of the page outside the

text area or slightly lower down inside the

text area. The default setting is for the

header to be shown inside the text area.

You can switch between these two positions.

Press the

Function button until the display

shows

FAX SET-UP

Display shows

DATE AND TIME

Display shows

VARIOUS SETTINGS

Press until the display shows

HEADER

INSIDE

Your header will be printed inside the text

area.

Press to display

INSIDE

or

OUTSIDE

.

To confirm the displayed option.

To return to standby.

When you have finished entering your name

To confirm. Display shows

PHONE NUMBER

Display shows

TYPE YOUR NUMBER

Enter your phone number.

Press to confirm.

To return to standby.

If you are entering your number in an

international format press the

✱

button to

enter a

+

.

/

16

Using your PaperJet 55E

Sending faxes

What type of paper you can use

Dimensions:

• width 148mm – 216mm.

• length 216mm – 600mm.

Thickness:

•60-90gsm max 15 sheets.

•50-140gsm 1 sheet at a time.

Do not use

•Torn, crumpled and rolled paper.

• Paper that is too thin

•Wet or moist paper.

• Carbon paper.

• Correction fluid, paperclips and staples.

Inserting documents in the feeder

• Gently insert documents to be faxed (up to 15 pages)

face down.

• Adjust the paper feeder width guides to fit.

Setting the contrast and resolution

You can choose different resolution and contrast

settings to ensure the best quality when faxing or

copying a document.

Setting the contrast and resolution

After inserting the document in the feeder.

Contrast

Press the Contrast button.

To select the setting you want.

• NORMAL – when the original document

is clearly printed.

• DARK – when the original document is

light.

• LIGHT – when the original document is

dark.

Resolution

Press the Resolution button.

To select the setting you want.

• STD (standard) – when the original

contains easy to read text.

• FINE – when the original contains small

or hard-to-read text or line diagrams.

• FINE and HALF-TONES – when the

original contains varying shades of grey

or pictures.

NOTE

FINE and HALF-TONES settings take longer to send.

After the fax has been sent, your PaperJet always

resets to normal contrast and default resolution.

To send a fax

Place document face down in the document

feeder.

If necessary set the Contrast and

Resolution settings.

Use the keypad to dial the number you

want.

Press the

Start button. The number is

dialled before your fax is scanned and sent.

When the fax has been sent, the display

shows

TX COMPLETED

to confirm a

successful transmission.

17

NOTE

If you make a mistake when entering a number,

press the < > buttons to move the cursor over the

digit and enter the correct digit. To delete the whole

number press the Clear button.

NOTE

All dialling is shown using 0-9 keypad. You can also

use one-touch or speed dialling if they are set.

To select the default resolution setting

Your machine is pre-set to STD resolution

for faxing and copying. You can change this

setting so that the resolution is

automatically set to FINE.

When the machine is in standby

Press until the display shows

FAX SET-UP

To display

DATE AND TIME

To display

VARIOUS SETTINGS

Press until the display shows

TX RESOL. STD

To switch between FINE and STD.

To confirm.

To return to standby.

To dial and hear the progress of your

fax call

Place document face down in the document

feeder.

If necessary set the Contrast and

Resolution settings.

Press the

Monitor button. You hear the

dialling tone over the loudspeaker.

Use the keypad to dial the number you want.

When you hear the far end machine

respond press the

Start button. Your fax is

scanned and sent.

When the fax has been sent, the display

shows

TX COMPLETED

to confirm a

successful transmission.

/

To redial the last number

Press the Last Number button twice.

18

To dial using the handset

Place document face down in the document

feeder.

If necessary set the Contrast and

Resolution settings.

Pick up the handset and listen via the

earpiece.

Use the keypad to dial the number you want.

If the other person’s fax machine is set up

for automatic reception, you hear the fax

tones, press the

Start button and replace

the handset. Your fax is scanned and sent.

If your call is answered in person, ask them

to press the start button on their fax

machine. You will then hear their fax tones.

Press the

Start button and replace the

handset. Your fax is scanned and sent.

When the fax has been sent, the display

shows

TX COMPLETED

to confirm a

successful transmission.

NOTE

To stop a fax being sent at any time, press the Stop

button.

Automatic re-dialling

If a fax fails to be sent, for example, the number

dialled was engaged, your PaperJet 55E will

automatically retry up to 3 times at 2 minute intervals.

If after all retries, the fax has not been sent, the

document will be deleted from memory (if using

MEMORY TX). You have the option of retaining

failed MEMORY TX faxes in memory to enable you

to try sending them again without re-scanning.

To do this you must enable the document

retransmission feature.

To switch document retransmission on/off

The default setting is off.

Press the

Function button until display

shows

FAX SETUP

Press the Start button. Display shows

DATE AND TIME

Press the Function button. Display shows

VARIOUS SETTINGS

Press the Start button until display shows

RETRANS.DOC: OFF

Press buttons to switch between

ON and OFF.

Press the

Start button to confirm the option

displayed.

The machine returns to standby.

/

19

If using the 12 hour clock, press the Function

button to switch between a for

AM

and p for

PM

.

Press the < > buttons to move the cursor.

NOTE

To cancel your pre-set fax transmission, press

the Stop button or remove the document from the

document feeder.

If you want to store the document in memory

for delayed faxing, see “To fax from memory” on

page 20.

To send a fax at a pre-set time (delayed

faxing)

You can set your PaperJet 55E to send a fax

at a specific time in order to take advantage

of cheaper call rates or to allow for different

time zones.

Place document face down in the document

feeder.

If necessary set the Contrast and

Resolution settings.

Press until the display shows

DELAYED TX

Press the Start button.

Display shows

TYPE TIME

HH:MM

Enter the time at which you want your fax

to be sent, e.g. 18.30.

Display shows

TYPE FAX NUMBER

and

NUM/TOUCH/SPEED

.

You can enter a number using the keypad, one

touch or speed dial memories. For one touch,

press the appropriate keypad button until

the entry appears in the display. For speed

dial, press speed dial followed by Code No.

Refer to pages 22 to 24.

Enter the number you want.

1 2 3

To change the details of a pre-set fax

You can set a new time and fax number.

Press until the display shows

DELAYED TX

Display shows

ALREADY ENTERED

Display shows

CHANGE PARAM?

Either

Press to display

CANCEL SETTING

To confirm. The fax is cancelled and your

machine returns to standby.

Or

Display shows

TYPE TIME

Enter the new time at which you want your

fax to be sent, e.g. 19.00

Display shows

TYPE FAX NUMBER

Press to confirm. Display shows

AUTOMATIC RX

TX AT 19.00

Press to confirm. Display shows the time at

which the fax is due to be sent

AUTOMATIC RX

TX AT 18:30

/

20

To fax from memory

Your PaperJet 55E has a memory which lets

you store one document for sending at a

pre-set time.

Place document face down in the document

feeder.

If necessary set the Contrast and Resolution

settings.

Display shows

TX FROM MEMORY

The document is scanned into the memory.

Display shows

STORING

then

TYPE TIME

HH:MM

Enter the time at which you want your fax

to be sent, e.g.

18.30 or press the Start

button to select the current time.

Display shows

TYPE FAX NUMBER

Use the keypad to dial the number you

want.

Display shows

TYPE FAX NUMBER

. If

required, enter the second number to which

you want to send your fax and press the

Start button again.

Repeat the last step until you have entered

all the numbers you want up to a maximum

of 10 when the display will show

END OF

LIST

.

After entering your last number press

Start

again to confirm. Display shows

TX SET

then

AUTOMATIC RX

(or current receive

mode) and

MEMORY TX

.

To broadcast a document

You can set your machine to send a document to up

10 different numbers (broadcasting).

See “To fax from memory” below.

If using the 12 hour clock, press the Function

button to switch between a for

AM

and p for

PM

.

Press the < > buttons to move the cursor.

To change, re-send or cancel a stored

document

When you have stored a document in the

memory for sending later:

Display shows

AUTOMATIC RX

MEMORY TX

Display shows

TX FROM MEMORY

Display shows

ALREADY ENTERED

Display shows

PRINT SETTING?

Press to switch between this and the other

two options

CHANGE PARAM?

or

CANCEL

SETTING?

Press to select the option displayed.

PRINT – you get a print out of the fax

details and then the machine returns to

standby.

/

Page is loading ...

BT Scanner User manual

This manual is also suitable for

BT Scanner User manual

Related papers

Other documents