Eiki LC-XIP2600 User manual

INTERACTIVE PROJECTOR

LC-XIP2600

OWNER'S MANUAL

About the Owner’s Manual

Features

Please read the owner’s manual thoroughly to ensure correct usage of the projector and its

features.

After reading, store the owner’s manual in a safe place for future reference.

1. Dress up Design

2. Designed for tough environment

3. Side change lamp

4. Sidechangelter

5. Quick power off

6. Advanced Anti-theft features

7. Five auto features (Auto Search, Auto Sync, Auto Ceiling, Auto Keystone and Auto

Filter Alert)

8. Seven display modes (Natural, Cinema, Daylight, Green board, White Board, Black

Board and User)

9. Built-in 8W speaker

10. Logo capture

11. Image freeze function

12. Digital zoom adjustment

13. Built-in interactive smart function.

14. Extreme Short Throw Distance.

Projector

The content of this manual is subject to change without prior notice.

Issue of edition 0901.05_01

Contents

1

Contents

About Owner’s Manual

Contents

.....................................................................................................................1

Contents of Your Box

............................................................................................3-A

Safety Instructions

....................................................................................................4

Safety Labels..............................................................................................................8

Part Names

................................................................................................................9

Projector .................................................................................................................. 9

Control Panel

........................................................................................................ 10

Rear

........................................................................................................................11

Setting Up ................................................................................................................12

Arrangement ..........................................................................................................12

Power ON / OFF

....................................................................................................13

Setting Up The Projector

.......................................................................................14

Ceiling Mounted Installation Guide

......................................................................15

Adjusting The Projector’s Elevation

.....................................................................16

How To Connect

....................................................................................................17

Remote Control .......................................................................................................19

Menu Operation

......................................................................................................21

How To Operate On-Screen Display ......................................................................21

MENU (PC Mode) ...................................................................................................22

Picture Menu (PC Mode) ........................................................................................22

Audio Menu (PC Mode)

......................................................................................... 23

Setting Menu (PC Mode)

........................................................................................ 24

MENU (Video Mode) ..............................................................................................25

Picture Menu (Video Mode) ....................................................................................25

Audio Menu (Video Mode)

.....................................................................................26

Setting Menu (Video Mode)

....................................................................................27

2

Contents

MENU ......................................................................................................................28

Advanced Menu .....................................................................................................28

Presentation Menu

.................................................................................................31

Security Menu

........................................................................................................33

PIN Key In Operation

............................................................................................36

Network Control Software Application ................................................................37

Before Use

................................................................................................................38

Before Using Network Control Software ..............................................................38

Projector Auto Search.

...........................................................................................39

Modify the Projector Setting

.................................................................................41

Registering And Conguring the Projector ..........................................................42

Delete ..................................................................................................................... 42

Projector Setting

.................................................................................................... 43

System Setting........................................................................................................44

Monitor / Default Setting / Auto Scan Timer.

........................................................ 45

Link

........................................................................................................................ 47

Control Panel Window Introduction .....................................................................48

Power Control / Input Source / Function Key ........................................................48

Function Key / Projector Status

..............................................................................49

Network Control Window Introduction

..................................................................50

Maintenance Of Projector ......................................................................................51

Air Filter / Replacing the Air Filter ........................................................................51

Lamp / Replacing New Lamp

.................................................................................53

Other Care

..............................................................................................................55

Troubleshooting .......................................................................................................56

Indicator .................................................................................................................. 56

Error For Machine Defects

..................................................................................... 57

List of Supported Monitor Displays

.......................................................................59

Appendix

Please refer "Interactive Function Manual" regarding the "Interactive Function".

Contents of Your Box

Safety Instructions

Contents of Your Box

Please make sure that following items are included in the box. If any items are missing, contact your

dealer please..

1. Projector

6. Remote control

2. Computer cable

3. Power cord

4. Quick Start Guide

5. Owner’s Manual CD

3-A

Safety Instructions

Contents of Your Box

3-B

7. USB Cable

8. Interactive Kit

4

Safety Instructions

The projector is designed and tested to meet the latest standards for safety of information

technology equipment. However, to ensure safe use of this product, it is important that you

follow the instructions mentioned in this manual and marked on the product.

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death.

WARNING

This symbol indicates information that, if ignored, could result in

personal injury or physical damage.

CAUTION

Typical Symbols

This symbol indicates an additional warning (including cautions).

An illustration is provided to clarify the contents (for example: the

illustration to the left indicates danger of electrical shock).

This symbol indicates a prohibited action. The contents will be clearly

indicated in an illustration or description near the symbol (for example: the

symbol to the left indicates that disassembly is prohibited).

This symbol indicates a compulsory action. The contents will be clearly

indicated in an illustration or description near the symbol

(for example: the symbol to the left shows that the power plug should be

disconnected from the power outlet).

5

Safety Instructions

WARNING

If a problem should occur

Ifsmokeorstrangeodorsarise,continuedusecouldresultinreorelectricalshock.In

such case, immediately turn off the power switch and then disconnect the power plug

from the power outlet. After making sure that the smoke or odor has stopped, contact your

dealer for repairs. Never attempt to make repairs yourself because this is dangerous.

Do not use this projector if there is no image or sound, or if the sound is distorted.

Continuedusecouldresultinreorelectricalshock.Insuchcase,immediatelyturnoff

the power switch; disconnect the power plug from the power outlet and contact your

dealer.

If water would enter the inside of this projector, immediately turn off the power switch,

disconnect the power plug from the power outlet and contact your dealer.

Do not install on an unstable surface.

Do not install this projector on an unstable surface such as a wobbly

stand or incline because this could result in the projector falling and

causing injury.

Do not open the cabinet.

Never open the cabinet. There is high voltage inside which can cause

electrical shock. Contact your dealer for internal inspection, adjustment

and repair.

Do not modify.

Donotmodifythisprojectorbecausethiscouldresultinreor

electrical shock.

Do not use in the bathroom or near water site.

Do not expose this unit to rain or use near water… for example, in the bathroom, a wet

basement, near a swimming pool, etc…

Do not insert objects into the Projector.

Do not insert metal objects through the ventilation openings, etc., of this projector or drop

suchobjectsinsidebecausethiscouldresultinreorelectricalshock.

If a foreign object should enter this projector, immediately turn off the power switch,

disconnect the power plug from the power outlet and contact your dealer.

Continuedusecouldresultinreorelectricalshock.Usespecialcautioninhouseholdand

where children are present.

NO SIDEWARD

Do not place the projector upon either

side to project an image.

Do not point the projector down to project

an image.

NO DOWNWARD

6

Safety Instructions

Do not look through the lens when the lamp is on.

Never look through the lens when the lamp is on. The powerful light could

adversely affect vision. Use special caution in households where children are

present.

Avoid shock or impact on the projector.

If the projector should fall, resulting in damage to the cabinet, immediately

turn off the power switch, disconnect the power plug from the power outlet

and contact your dealer.

Continuedusecouldresultinreorelectricalshock.

Do not place this projector in a container containing liquid. Do not place ower

vases, owerpots, cups, cosmetics, liquids such as water, etc., on top of this projector.

Do not use any power cable except those supplied with the projector.

Theuseofanyotherpowercablecouldresultinreorelectricalshock.

Do not shine the laser beam onto yourself or other.

The laser pointer function of projector remote control emits class II laser beam.

Do not look directly into the laser beam outlet or direct the laser beam at other people.

Vision can be impaired if the laser beam enters the eyes. Especially pay attention if

children are present.

High temperatures are generated when the lamp is lit; so do not place objects in

front of the lens.

Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is

critical for proper air circulation and cooling of the unit.

The dimension shown here indicate the minimum space required. If the projector is to

be built into a compartment or similarly enclosed, these minimum distances must be

maintained.

WARNING

Side and Top

Rear

7

Safety Instructions

Placing heavy objects on top of this projector could result in loss of balance or

falling and cause personal injury or damage the projector.

Do not block the ventilation openings.

Do not block the ventilation openings of this projector.

Blockingventilationcouldleadtointernaloverheatingwhichcouldresultinre.

Do not place this projector on its side during use or push it into a small, poorly ventilated

location.

Do not place this projector on a carpet or bedding or cover it with a tablecloth, etc.

Care and maintenance.

For safety purposes, disconnect the power plug from the power outlet before starting the

care and maintenance of this projector.

Battery usage.

Replace the batteries with the same type only.

Donotmixoldandnewbatteries;thiscouldresultinreorpersonalinjuryduetobattery

cracking or leakage.

Make sure the plus and minus terminals are correctly aligned when loading the

batteries.

Incorrect loading could result in personal injury or contamination of

the surroundings due to battery cracking or leakage.

Have the projector interior cleaned regularly.

Contact your dealer to arrange for the service.

Accumulationsofdustinsidetheprojectorcanresultinreormalfunctionifnotcleaned

for an extended period.

Ask your dealer for details about internal cleaning.

CAUTION

Safety Labels

8

Safety Labels

Safety labels are used on or within the projector to alert you to items or areas

requiring your attention.

WARNING LABEL

EMI Label

LAMP DOOR WARNING LABEL

Part Names

9

Part Names

8

7

6

5

4

7

1

8

2

3

9

Projector

1

Control panel

Operating system.

Lens Cover

Attach when not using to protect the lens

from becoming dirty or damaged.

Filter cover

Prevents dust and other foreign particles

from being drawn into projector.

Removetheltercovertocleantheair

lter.

Focus ring

Use the focus ring to focus the projector

image.

Rotate the focus ring until the image is

clear.

Zoom ring

Use the zoom ring to adjust the size of the

projected image.

Rotate the zoom ring until the image is the

desired size.

Lamp door

The lamp unit is inside.

Foot adjust button

Lock / unlock the adjustable foot.

Front adjustable foot

Extend and retract to adjust the projection

angle.

Front IR

receiver

Outlet

ventilation

18

Dustproof function.

12

3

14

15

16

17

9

Gate Plate

10

Part Names

110

KEYSTONE

Adjust the vertical keystone.

11

VOLUME + / -

Sound louder or lower.

112

INPUT

Select input source:

Note :

If the projector can not be captured the

signals within 15 minutes, it will be shut

down automatically.

113

MENU

Display or hide the OSD main menu.

1

14

BLANK

Blank the projected image. The time of

Blank mode can be set in 15 minutes, 30

minutes or 60 minutes. The projector will

shut down automatically after passing each

set time.

Control Panel

10

11

12

14

13

15

16

17

18

LAMP INDICATOR

POWER INDICATOR

115

AUTO

Automatically adjust the setting to

match the current input.

116

(POWER)

Power On / Off.

1

17

LAMP INDICATOR

Indicate a status in the projector.

1

18

POWER INDICATOR

Lightonorashtoindicatetheoperating

status of the projector.

RGB 1 RGB 2

Video

S-Video

DVI-I

Y,Pb,Pr

11

Part Names

Rear

A

USB

Connect the USB cable to a computer

to utilize the Interactive functions.

B

RS232

Serial data port for controlling the projector

with a computer or other RS-232 control

device.

C

AUDIO IN 1 &

D

AUDIO IN 2

Mini jack port corresponds to computer

input.(RGBIN→AUDIOIN1,DVI-1IN

→AUDIOIN2)

E

AUDIO OUT

This jack outputs the audio signal

from computer signal to external audio

equipment.

F

RGB IN

Input analog RGB signal from a computer.

G

RGB OUT

Connect an external monitor to this

connection to view the “RGB IN” input.

H

DVI-I IN

Input digital DVI-I signal from a computer.

I

S-VIDEO

S-Video signal from a video source.

J

VIDEO

Composite video signal from a video

source.

K

AUDIO IN 3, R / L

RCA type corresponds to video input.

L

COMPONENT ( Y, Pb, Pr / Y,

Cb, Cr)

Input Component signal from a DVD

player.

M

LAN

Please see page 37 Network Control

Application for details.

N

REAR IR RECEIVER

O

SPEAKER

P

Slot for Kensington Micro Saver

Security System

Built-in Security Slot

This security slot supports the MicroSaver

®

Security System. MicroSaver

®

is a registered

trademark of Kensington Microware Inc.

The logo is trademarked and owned by

Kensington Microware Inc.

A

B

C

D

E

F

G

H

I

J

K

L

M

N

P

O

Setting Up

12

Setting Up

When installed against a wall, leave about 20cm (7.9in.) between the projector and the wall.

6.12~7.37

4.06~4.9

3.03~3.67

2.01~2.43

1.59~1.94

1.18~1.45

0.77~0.95

Distance(M)

Image size(inch)

6.12~7.37

4.06~4.90

3.03~3.67

2.01~2.43

1.59~1.94

1.18~1.45

0.77~0.95

Image size(inch)

Distance(M)

Arrangement

1. Before installation, make sure that the projector is turned off and the power cord is disconnected.

2. Do not set up and move the projector, while it is hot.

3. The distance between the projector and screen determines the actual image size. Refer to the table

below to determine the screen size at a given distance.

Note: The dimensions in the table below are approximate.

Screen size (diagonal) Distance (m) Distance (feet)

inch m Tele Wide Tele Wide

40 1.0 0.95 0.77 3.13 2.53

60 1.5 1.45 1.18 4.74 3.88

70 1.8 1.69 1.39 5.55 4.56

80 2.0 1.94 1.59 6.36 5.23

100 2.5 2.43 2.01 7.98 6.58

150 3.8 3.67 3.03 12.03 9.95

200 5.1 4.90 4.06 16.07 13.32

250 6.4 6.13 5.09 20.12 16.69

300 7.6 7.37 6.12 24.16 20.06

13

Setting Up

Power ON / OFF

Turning On The Power

1.Makesurethatpowercordisrmlyand

correctly connected to the projector.

2. The green Power indicator blinks slowly.

3. Remove the lens cover.

4. Press POWER button on the control panel or

the remote control to turn on the projector.

5. Rotate the zoom ring to adjust the screen size.

6. Rotate the focus ring to adjust the focus.

Turning Off The Power

1. Press the POWER button on the control

panel or the remote control. The "power off"

conrmationmessagewillappear.

2. Press the POWER button again while the

message is shown on the screen.

3. When the projector enters "Standby" mode,

the green Power indicator blinks slowly.

4. The projector cannot be turned on while red

"Lamp indicator" is blinking slowly in cooling

mode.

5. If you don’t use the projector for a long time,

remove power cord.

WARNING



Do not touch around the lamp cover and the

exhaust vents during use or just after use, since it

is too hot.

POWER indicator

AC inlet

Outlet

Focus ring

Zoom ring

WARNING



A strong light is emitted when the projector’s

power is on. Do not look into the lens of the

projector or look inside of the projector through

any of the projector’s openings.

CAUTION



Do not turn off the AC power for 60 seconds

after the lamp is turned on. Doing so could cause

premature lamp failure.

Power off?

Please press

key again to power off.

1.

2.

3.~4.

5.

14

Setting Up

Setting Up The Projector

The projector supports the following four different projection methods.

1. Front projection

2. Rear projection

3. Rear ceiling projection

4. Front ceiling projection

Special installation is required in order to suspend the projector from the ceiling. Please ask your

dealer for details.

0˚

180˚

270˚

90˚

The projector can be installed pitched by any

angle (360 degree) without any setting in fan

mode. As for rolling it must be within 10 degree.

15

Setting Up

Ceiling Mounted Installation Guide

Attachceilingmountatfour-suspensionbracketxingpointswhensuspendingfromaceiling.

Special installation is required in order to suspend the projector from the ceiling. Please ask your

dealer for details.

Security Anchor

The product is equipped with security anchor and PIN

LOCK (See page 33 for detials) functions to help prevent

unauthorized removal of the projector.

MAX M4x8 mm For Mounting

WARNING

►Donotgraspthesecurityanchortocarryprojector,sinceitisnotdesignedforit.

►Thesecurityanchorisnotforcomprehensivetheftpreventionmeasures.Itisintendedtobe

used as supplemental theft prevention measure.

16

Setting Up

Adjusting The Projector’s Elevation

Use the adjustable foot at the front of the projector to set the image height.

1

Holding the projector, push the foot adjust

buttons to loosen the front adjustable foot.

12

Position the front side of the projector to the

desired height.

3

Release the foot adjust buttons in order to

lock the front adjustable feet.

14

Please make sure that the front adjustable

feet are locked.

Pleaserotatetheadjustablefeetwhenne

adjustment of tilt is needed.

CAUTION

* The adjustment range of front adjustable

foot is 0 to 8.5 degrees.

* When the foot is adjusted, it may cause the

shape of the projected image to become

distorted. Use the keystone correction

function to correct this distortion.

15

17

Setting Up

Before starting, make sure that the projector and computer are both turned off.

Connect the computer

Connect the computer cable from the computer to the projector's RGB IN or DVI-I IN.

Connect a computer cable from the MONITOR OUT to an external monitor to view the

signal on RGB IN or DVI-I IN. Tighten the screw on all connectors.

How To Connect

Laptop or desktop computer

AUDIO OUT

MOUSE

RS-232

AUDIO OUT

DVI OUT

VGA OUT

RGB IN

AUDIO IN

VIDEO OUT AUDIO OUT (L)&(R)

S-VIDEO OUT

YPb/Cb Pr/Cr

Desktop / Laptop

Speaker

DVD Player

Page is loading ...

Eiki LC-XIP2600 User manual

Eiki LC-XIP2600 User manual

Related papers

Other documents