Ampire BL600 Owner's manual

Type
Owner's manual

This manual is also suitable for

[ Installation Manual ]
MODEL
BL600
32
© June 2015 ampire Electronics - All rights reserved
© June 2015 ampire Electronics - All rights reserved
Quick Start
• Install the BL600 software from our website byclickingon
thebutton„BL600SoftwareVersion„X.XX“.
• ConnectthebootloadertoyourPC.
• YourPCconnectviainternettogetthenewestsoftware.
• Copy the program "UCanlog3" to your desktop and start
withadoubleclick.
• ConnecttheCAC200withthebootloaderBL600.
Login:__________________
AlsPasswort:___________________
Ifthereisacurrentfirmwareavailable,itwillbeshownin
thewindowbelow.Whenthisisthecase,youhavetoclick
onitanditwill"UPGRADE"it.
• First you have to click on „READ“ to read out the actual
programm-number.
• Thenyouhavetoselectanumberofthecompatibility-list.
• AfterwardsyouhavetoclickontheButton"WRITE"andto
checkifeverythingworkedoutyouhavetoclickon"READ".
• Ifthenumberiscorrect,theCAC200canbeinstalled.
Image1:Before
Image2:After
ampire
ELECTRONICS
© 2015 AMPIRE ELECTRONICS. All rights reserved. Reprint is only permitted with a written authorization.
Langwadener Straße 60
D-41516 Grevenbroich
Email: info@ampire.de
Technical Support:
Phone.: +49-2181-81955-0
www.ampire.de
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ampire BL600 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI