ADLINK Technology GEME-H4000 Series User manual

GEME-4000/H4000/S4000

5000/X5000/S5000 Series

General Embedded Machine Engine

User’s Manual

Manual Rev.: 1.00

Date: April 25, 2006

Part Number: 50-1D002-200

The information in this document is subject to change without prior notice in

order to improve reliability, design, and function and does not represent a

commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental,

or consequential damages arising out of the use or inability to use the product

or documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright laws. All

rights are reserved. No part of this manual may be reproduced by any

mechanical, electronic, or other means in any form without prior written

permission of the manufacturer.

Trademarks

GEME

®

is a registered trademark of ADLINK Technology Inc. Other product

names mentioned herein are used for identification purposes only and may be

trademarks and/or registered trademarks of their respective companies.

Getting Service from ADLINK

Customer Satisfaction is top priority for ADLINK Technology Inc. If you need

any help or service, please contact us.

ADLINK TECHNOLOGY INC.

Web Site http://www.adlinktech.com

Sales & Service [email protected]

TEL +886-2-82265877 FAX +886-2-82265717

Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan

Please email or FAX your detailed information for prompt, satisfactory, and

consistent service.

Detailed Company Information

Company/Organization

Contact Person

E-mail Address

Address

Country

TEL FAX

Web Site

Questions

Product Model

Environment

OS:

Computer Brand:

M/B: CPU:

Chipset: BIOS:

Video Card:

NIC:

Other:

Detail Description

Suggestions for ADLINK

Table of Contents • i

Table of Contents

Introduction.................................................................................... 1

1.1

Product Overview............................................................................ 1

1.2

Unpacking Checklist........................................................................ 2

1.3

GEME Family.................................................................................. 3

1.3.1 Name Rule ............................................................................. 3

1.4

Specifications .................................................................................. 5

Base Unit ........................................................................................9

2.1

Dimensions ..................................................................................... 9

2.2

Base Unit Connector Pin Assignments.......................................... 13

2.2.1 VGA Connector......................................................13

2.2.2 USB Connector (2 Ports) ....................................... 13

2.2.3 AC input connector ................................................14

2.2.4 Ethernet (RJ-45) Connector...................................14

2.2.5 COM1/COM2......................................................... 15

2.2.6 Integrated PS/2 KBD/MS connector....................... 16

2.2.7 IEEE1394 Connector............................................. 16

2.2.8 Compact Flash Connector ..................................... 17

2.2.9 Parallel Port connector........................................... 17

2.2.11 GPIO connector (GEME-H4000/X5000) .............. 18

2.2.12 DVI/LVDS, Audio Connector................................ 19

Power Supply Unit.......................................................................21

3.1

Dimensions ................................................................................... 21

3.2

Specifications ................................................................................ 23

3.2.1 AC Power Supply................................................... 23

3.2.1 DC Power Supply................................................... 23

Getting Started.............................................................................25

4.1

IDE Boot Sequence Settings......................................................... 25

First/Second/Third/Other Boot Device ............................ 26

4.2

IRQ Information............................................................................. 27

4.3

Software Settings .......................................................................... 27

4.4

Software Support .......................................................................... 29

4.4.1 Operation System Support..................................... 30

4.4.2 Driver Support........................................................ 32

4.4.3 GEME Driver Installation List................................. 33

Extension Modules......................................................................35

ii • Table of Contents

5.0

Extension Modules Overview ........................................................ 35

5.0.1 Product series........................................................ 35

5.1

MPC-8164..................................................................................... 36

5.1.1 Features................................................................. 36

5.1.2 CN2 Pin Assignments: Main connector..................37

...................................................................................................37

5.1.3 CN3 Pin Assignment: General Purpose DI/DO ports38

...................................................................................................38

5.1.4 MPC-8164 Dimensions.......................................... 38

5.2

MPC-8366/8372 ............................................................................ 39

5.2.1 Features................................................................. 39

5.2.2 Specifications......................................................... 39

5.2.3 SP1 Pin Assignment: I/O Connector of MPC-8372/6642

5.2.4 Dimensions............................................................ 44

...................................................................................................45

5.3

MPC-7632/7632AU/7664 .............................................................. 46

5.3.1 Features................................................................. 46

5.3.2 Specifications......................................................... 46

5.3.3 CP1 Pin Assignment.............................................. 47

5.3.4 CP2 Pin Assignment.............................................. 48

5.3.5 Dimensions............................................................ 49

5.4

PMC-RTV24G ............................................................................... 51

5.4.1 Features................................................................. 51

5.4.2 Specifications......................................................... 51

5.4.3 Pin Assignment...................................................... 52

...................................................................................................52

5.4.4 Dimensions............................................................ 53

5.5

PMC-3534G .................................................................................. 54

5.5.1 Features................................................................. 54

5.5.2 Specifications......................................................... 54

5.5.3 Pin Assignment...................................................... 54

5.5.4 Dimensions............................................................ 55

5.6

PMC-3544G .................................................................................. 56

5.6.1 Features................................................................. 56

5.6.2 Specifications......................................................... 56

5.6.3 Pin Assignment...................................................... 56

...................................................................................................57

5.6.5 Dimensions............................................................ 57

5.7

PMC-7841G .................................................................................. 58

5.7.1 Features................................................................. 58

5.7.2 Specifications......................................................... 58

5.7.3 Pin Assignment...................................................... 58

Table of Contents • iii

5.7.4 Dimensions............................................................ 59

5.8

PMC-7852G .................................................................................. 60

5.8.1 Features................................................................. 60

5.8.2 Specifications......................................................... 60

5.8.3 Pin Assignment...................................................... 61

5.8.4 Dimensions............................................................ 62

Appendix A: Important safety instructions ............................. 63

Appendix B: Warranty Policy ....................................................65

Introduction • 1

1

Introduction

1.1 Product Overview

The General Embedded Machine Engine (GEME) 4000/5000 series is a

complete embedded solution for Machine Automation/ Machine Vision/ Vision

system integrators who are looking for a embedded controller to run their

CPU-intensive applications.

GEME is a rugged and compact chassis that supports an embedded SBC and

power supply unit with optional storage peripherals, such as CompactFlash

cards or a 2.5" HDD. Software compatibility, reliability and OS size issues can be

avoided through its built-in embedded software.

Although GEME is highly integrated, it can be further expanded with PMC

modules and PC/104 extension modules supporting motion, vision, DIO,

communications, and High Speed Link applications.

With both hardware and software integrated in a single package, GEME is

optimized for performance and will deliver the best reliability to our customers.

Some important features of GEME are listed below:

z Low power consumption, fanless CPU applied for embedded applications

z Versatile functionalities: motion, vision, DIO, communications, High Speed

Link

z Expandable enclosure design for PMC and PC104 modules

z Compact and rugged system design with wall-mounting kit

z OS support: Windows CE, Windows XP Embedded, and Linux

This chapter is designed to give you an overview of GEME’s platform. The

chapter covers the following topics:

• Unpacking Checklist

• GEME Family

• Specifications

• Dimensions and Explode Drawing

2 • Introduction

1.2 Unpacking Checklist

Check the shipping carton for any damage. If the shipping carton and contents

are damaged, notify the dealer for a replacement. Retain the shipping carton

and packing material for inspection by the dealer. Obtain authorization before

returning any product to ADLINK.

Check the following items are included in the package, if there are any missing

items, contact your dealer:

Product Included Items

GEME-4000/5000

series

(Basic Base system)

• All-in-one support CD-ROM (software & manuals)

• Wall mounting kit:

 Wall mounting bracket (x4)

 M4 8mmScrew (8)

• Power cord (L=1.8M, country of use to be specified

while ordering) (for AC type only)

• PS/2 Y cable

• IDE flat cable (40 pin, L=57cm)

• FDD flat cable (34pin, L=52cm)

• 4-pin DC output harness for external drive (43cm)

GEME-H4000/X5000/S

4000/S5000 series

(Advanced Base

System)

• All-in-one support CD-ROM (software & manuals)

• Wall mounting kit:

 Wall mounting bracket (x4)

 M4 8mmScrew (8)

• Power cord (L=1.8M, country of use to be specified

when ordering) (for AC type only)

• PS/2 Y cable

Note: (1) The packaging of the GEME OEM version with non-standard

configuration, functionality, or package may vary according to different

configuration requests.

Introduction • 3

CAUTION: The board fitted inside the GEME system must be protected from

static discharge and physical shock. Never remove any of the socketed

parts except at a static-free workstation. Use the anti-static bag shipped

with the product to handle the board. Wear a wrist strap grounded

through one of the system's ESD Ground jacks when servicing system

components.

1.3 GEME Family

The GEME 4000/5000 family can be classified by CPU performance into the

4000 and 5000 series. It can be further distinguished by the availability of vision

functionality and interfaces. Extension modules can be ordered to provide other

functions not standard on the base unit. Please refer to the following table for

available base units in the GEME family.

1.3.1 Name Rule

GEME 4000 is the product series with Celeron M CPU and GEME-5000 is the

product series with Pentium M CPU.

GEME 4000, GEME-5000 start with Basic Base system. With several different

specific PMC module installed, we call them Advanced Base system. On all the

Base systems, several more PC-104 modules can be added.

The Basic Base system is equipped with the IDE interface and FDD interface.

With the 2

nd

digit , it is used to identify the different CPU. Please refer to the

below table for reference.

CPU

GEME-42000 / GEME-∀42000

Celeron M 1.0GHz

GEME-52000 / GEME-∀52000

Pentium M 1.4GHz

GEME-53000 /GEME-∀53000

Pentium M 1.1GHz

!

4 • Introduction

The “∀” mark is the alphabet used to identify the different function, where :

X: embedded PMC module with 4 channels video capture, which can support up

to 120 fps

H: embedded PMC module with H/W MPEG4.

S: embedded PMC module with PCMCIA, CF and 2 USB2.0 ports

Introduction • 5

1.4 Specifications

GEME-4000

GEME-H4000 GEME-5000 GEME-X5000

SBC Model No. EBC-P400

CPU

Ultra Low Voltage

Celeron M

Low Voltage

Pentium M

Cache

512 KB on-die Advanced

Transfer Cache (ATC)

1 MB/2 MB on-die Advanced

Transfer Cache (ATC)

System Memory One SODIMM socket for up to 1GB DDR333

Intel 855GME Graphics and Memory Controller Hub (GMCH)

Chipset

Intel I/O Controller Hub 4 (ICH4)

z On-board VGA controller built-in AGP (3D hyper pipelined

architecture)

z Up to 1600 x 1200 in 32-bit color at 85Hz refresh rate

z Video memory sharing from main memory with Intel Dynamic

Video Memory Technology (DVMT)

VGA

z Up to 64 MB of dynamic video memory allocation

DVI, LVDS

(Optional)

18-bit LVDS interface

DVI interface, compliant with DVI specification 1.0

TV-Out (Optional) BNC Connector

BIOS Award BIOS, support PnP

Video Capture No

WIS H/W

MPEG4

encoder

processor

4-CH CIF

compress,

4-CH CIF

preview

No

Four Conexant

Fusion878A

Video decoder

processor

4-CH

NTSC/PAL

input

USB Two USB ports, USB 2.0 compliant

IEEE 1394

Texas Instruments TSB43AB23 1394a-2000 OHCI PHY/link-layer

controller

Three IEEE-1394 ports (two external , one internal)

Ethernet Intel 82562EM 10BaseT/100BaseTx

Enhanced IDE

Bus Master IDE controller, EIDE interfaces for up to two

devices, support PIO Mode 3/4 or Ultra DMA/100 IDE

devices, including Hard Disk Drive, ATAPI CD-ROM, LS120,

and ZIP drives.

CompactFlash 50 pin socket for CompactFlash Type I/II

SBC

Super I/O Chipset Winbond W83627HF

6 • Introduction

Hardware

Monitoring

Built-in Winbond W83627HF, monitoring CPU temperature,

voltage and battery,+3.3V,+5V,+12V voltage

COM Ports

COM1/ COM2: 16550 UART compatible ports with RS-232

interface,COM2 also supports RS-422,RS-485

Parallel Port One high-speed parallel port, SPP/EPP/ECP mode

Keyboard/Mouse Combed PS/2 type mini-DIN connectors

Floppy Interface None

PMC Interface

1 on-board 32-bit 33Mhz PMC module socket for functionally

expansion

PC104 Interface 16-bit, PC/104 interface for functionally expansion

Watchdog Timer Time-out timing select 1-255 seconds

Dimensions 129mm x 167.5mm

GEME-4000

GEME-H4000 GEME-5000 GEME-X5000

Universal input AC 100 VAC to 220 VAC, Max. output : +5V

11.5A, +12V 3A, -12V 0.5A

Power Supply

(optional)

DC input: 10VDC to 30VDC, Max. input current: 13A at 10VDC,

Max. output: +5V 10A, +12V 1.5A, -12V 0.3A

Operating Temp. -10˚-55˚C -10˚-50˚C -10˚-55˚C -10˚-50˚C

Humidity 0%-90%

Dimensions

183x140x95.36 mm (wall mount kit not included)

[16.84 mm(H) for each extension kit ]

With 512MB DDRAM

+5V 4.0A, +12V 300mA

With 512MB DDRAM

+5V 5.5A, +12V 300mA

Power

Consumption

Test conditions: (1) CPU 100% loading (2) No HDD, CD ROM,

extension module

Power Output

+5V Max. 1A,

+12V Max. 1A

None

+5V Max. 1A,

+12V Max. 1A

None

Storage

One 44-pin IDE

removable

HDD

one 44-pin IDE

HDD

One 44-pin IDE

removable

HDD

one 44-pin IDE

HDD

GPIO (TTL) none

Four digital

input,

Four digital

output,

none

Four digital

input,

Four digital

output,

System

Operating System Windows CE, Windows XP Embedded, Linux

Introduction • 7

Random Vibration

Operating: 5-100Hz, 0.00142 g2/Hz; 100-500Hz, -6dB/Octave,

0.5Grms, 3axes, 30 minutes/axis

Non-operating: 5-100Hz , 0.02g2/Hz ; 100-500Hz , -6dB/Octave,

1.88Grms, 3 axes,1hr/axis

(IEC 68-2-64)

Warning! Always disconnect the power cord from your chassis whenever you

are working on it. Do not connect the power cord while the power switch is

on. A sudden rush of power can damage sensitive electronic components.

Only authorized and experienced electronics personnel should open the

chassis.

Caution! Always ground yourself to remove any static electric charge before

touching GEME. Modern electronic devices are very sensitive to static

electric charges. Use a grounding wrist strap at all times. Place all

electronic components on a static-dissipative surface or in a

static-shielded bag.

Base Unit • 9

2

Base Unit

This chapter will familiarize the user with available GEME interfaces and

connections before getting started and includes the following information:

• Dimensions

• Base Unit Connector Pin Assignments

2.1 Dimensions

10 • Base Unit

POWER SUPPLY

INPUT : 100~240VAC

50~60Hz

POWER

HDD

PWR ACT/LINK

10/100M

LAN

RESET

KB/MS

IEEE1394

USB

COM2 LPT1

VGA COM1

CF

MIC INSPK OUT

HDD

CF

TOP VIEW

FRONT VIEW

SIDE VIEW

Figure 1. GEME-4000/5000 base unit dimensions

Base Unit • 11

POWER SUPPLY

INPUT : 100~240VAC

50~60Hz

POWER

HDD

PWR ACT/LINK

10/100M

LAN

RESET

KB/MS

IEEE1394

USB

COM2 LPT1

VGA COM1

CF

CH0 CH1 CH2 CH3 GPIO

TOP VIEW

FRONT VIEW

SIDE VIEW

Figure 2. GEME-H4000/X5000 base unit dimensions

12 • Base Unit

POWER SUPPLY

INPUT : 100~240VAC

50~60Hz

POWER

HDD

PWR ACT/LINK

10/100M

LAN

RESET

KB/MS

IEEE1394

COM2 LPT1

VGA COM1

CF

USB

PCMCIA

USB

TOP VIEW SIDE VIEW

Figure 3. GEME-S4000/S5000 dimensions

Page is loading ...

ADLINK Technology GEME-H4000 Series, GEME-4000 Series, GEME-5000 Series, GEME-S4000 SEries, GEME-S5000 Series, GEME-X5000 Series User manual

Related papers

Other documents