Grizzly G0577 Fretboard Radiusing Attachment
The Grizzly G0577 is a versatile woodworking accessory designed to provide precise and efficient fretboard shaping. It's a great option for luthiers and guitar enthusiasts who demand a professional-grade solution for shaping and sanding their fretboards.
With its robust construction and durable materials, the G0577 ensures long-lasting performance and reliability. It securely attaches to your existing equipment, making it easy to integrate into your workflow. The attachment's compact size and lightweight design allow for convenient storage and portability, adding flexibility to your workspace.
Grizzly G0577 Fretboard Radiusing Attachment
The Grizzly G0577 is a versatile woodworking accessory designed to provide precise and efficient fretboard shaping. It's a great option for luthiers and guitar enthusiasts who demand a professional-grade solution for shaping and sanding their fretboards.
With its robust construction and durable materials, the G0577 ensures long-lasting performance and reliability. It securely attaches to your existing equipment, making it easy to integrate into your workflow. The attachment's compact size and lightweight design allow for convenient storage and portability, adding flexibility to your workspace.
COPYRIGHT © FEBRUARY, 2018 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#ES19415 PRINTED IN TAIWAN
Revised Inventory
The following changes were recently made since the owner's manual was printed:
• Parts breakdown has been revised.
• Inventory list has been revised.
• Step 2 in the Assembly section has been revised.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at (570) 546-9663 or [email protected].
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G0577
***IMPORTANT UPDATE***
For Machines Mfd. Since 12/17
and Owner's Manual Revised 05/09
Box Contents Qty
K. Hardware Bag
—Hex Bolts
5
⁄16
"-18 x
5
⁄8
" ............................. 2
—Flat Washers
5
⁄16
" .................................... 8
L. Rotation Plate Bracket ............................... 1
Revised Parts Breakdown
216V2
218
217
222
221
231
236
235
226
REF PART # DESCRIPTION
216V2 P0577216V2 SHORT SUPPORT BRACKET V2.12.17
226 P0577226 FLAT WASHER 5/16
235 P0577235 HEX BOLT 5/16-18 X 5/8
236 P0577236 ROTATION PLATE BRACKET
Revised Assembly Step
To install fretboard radiusing attachment:
2. Attach rotation plate bracket to short support
bracket with (2)
5
⁄16
"-18 x
5
⁄8
" hex bolts and (2)
5
⁄16
" flat washers (see Figure 1), then align
hole in short support bracket with hole in
rotation plate and loosely secure it with a
3
⁄8"-16 x 1½" hex bolt and a
3
⁄8" flat washer.
Figure 1. Rotation plate bracket attached to
short support bracket and rotation plate.
x 2
x 1
Short Support
Bracket
Rotation
Plate Bracket
Rotation
Plate
Fretboard Radiusing Attachment
MODEL G0577
INSTRUCTION MANUAL
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
WARNING
Table of Contents
INTRODUCTION ............................................................................................................................... 2
SECTION 1: SAFETY ....................................................................................................................... 3
SECTION 2: SET UP ........................................................................................................................ 5
SECTION 3: OPERATIONS ........................................................................................................... 10
SECTION 4: MAINTENANCE......................................................................................................... 12
WARRANTY AND RETURNS ........................................................................................................ 14
Foreword
INTRODUCTION
Contact Info
www.
grizzly.com
4. ALWAYS USE HEARING PROTECTION
WHEN OPERATING MACHINERY.
5. WEAR PROPER APPAREL.
6. NEVER OPERATE MACHINERY WHEN
TIRED, OR UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL.
1. READ THROUGH THE ENTIRE MANUAL
BEFORE STARTING MACHINERY.
2. ALWAYS USE ANSI APPROVED
SAFETY GLASSES WHEN OPERATING
MACHINERY.
3. ALWAYS WEAR AN ANSI APPROVED
RESPIRATOR WHEN OPERATING
MACHINERY THAT PRODUCES DUST.
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words which are intended to convey the level of
importance of the safety messages. The progression of symbols is described below. Remember
that safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
This symbol is used to alert the user to useful information about
proper operation of the machine.
NOTICE
Safety Instructions for Machinery
SECTION 1: SAFETY
7. ONLY ALLOW TRAINED AND PROP-
ERLY SUPERVISED PERSONNEL TO
OPERATE MACHINERY.
8. KEEP CHILDREN AND VISITORS AWAY.
9. MAKE WORKSHOP CHILD PROOF.
10. NEVER LEAVE WHEN MACHINE IS
RUNNING. OFF
11. DO NOT USE IN DANGEROUS
ENVIRONMENTS.
12. KEEP WORK AREA CLEAN AND WELL
LIT.
13. USE A GROUNDED EXTENSION CORD
RATED FOR THE MACHINE AMPERAGE.
14.
ALWAYS DISCONNECT FROM POWER
SOURCE BEFORE SERVICING
MACHINERY
15. MAINTAIN MACHINERY WITH CARE.
16. MAKE SURE GUARDS ARE IN PLACE
AND WORK CORRECTLY BEFORE
USING MACHINERY.
Safety Instructions for Machinery
17. REMOVE ADJUSTING KEYS AND
WRENCHES.
ON
18. CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY.
19. USE RECOMMENDED ACCESSORIES.
20. DO NOT FORCE MACHINERY.
21. SECURE WORKPIECE.
22. DO NOT OVERREACH.
23. MANY MACHINES WILL EJECT THE
WORKPIECE TOWARD THE OPERATOR.
24. ALWAYS LOCK MOBILE BASES
(IF USED) BEFORE OPERATING
MACHINERY
25. BE AWARE THAT CERTAIN WOODS
MAY CAUSE AN ALLERGIC REACTION
please immediately call Customer Service at
(570) 546-9663for advice.
Otherwise, filing a freight claim can be difficult.
Wear safety glasses dur-
ing the entire set up pro-
cess!
This attachment pres-
ents serious injury haz-
ards to untrained users.
Read through this entire
manual to become famil-
iar with the controls and
operations before using
this attachment!
UnpackingSet Up Safety
SECTION 2: SET UP
DESCRIPTION QTY
Items Needed For
Set Up
Unsupervised children and
visitors inside your shop
could cause serious per-
sonal injury to themselves.
Lock all entrances to the
shop when you are away and
DO NOT allow unsupervised
children or visitors in your
shop at any time!
Inventory
G0577 Box Contents Figure 1 QTY
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
Figure 1.
Drilling & Tapping
Installation Holes
Figure 2
Figure 2.
To drill and tap the installation holes:
1. Unplug the sander
2.
Figure 3.
3.
Figures 3 & 4
10mm (
25
⁄64")
7
⁄16"
Diameter
27mm
(1
1
⁄16")
27mm (1
1
⁄16")
76mm
(3")
91mm
7
⁄16"
Diameter
7
⁄16"
Diameter
(3
37
⁄64")
5
⁄16"
Diameter
248mm (9
3
⁄4")
180mm (7
3
⁄32")
34mm
(1
11
⁄32")
Figure 4.
Figure 5.
5.
6.
7.
Always use cutting fluid when drilling
and tapping sheet metal (the stand and rota-
tion plate). When drilling or tapping cast iron
(the platen), cutting fluid is not necessary.
8.
For every half turn of the tap, back off
a quarter turn to clear the chips and prevent
the tap from breaking.
4.
Figure 5
Assembly
To install the fretboard radiusing attachment
onto the sander:
1.
Some machines may require the
included
3
⁄8" thick shim between the bracket
and the platen.
2.
3.
Figure 6
4.
5.
6.
Figure 6.
7. Figure
7
Figure 7.
8.
Figure 8
Figure 8.
9.
Figure 9
11.
12.
10.
Figure 10
Figure 10.
Figure 9.
Damage to your eyes, lungs, and ears could
result from using this attachment without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this attachment.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
To attach the fretboard to the radiusing attach-
ment:
1.
2.
This center line is important. If it is off
center, the radius of the fretboard will be off
center.
3.
Only use high quality, film type, dou-
ble stick tape. Reinforced and foam backed
double stick tape will not hold the fretboard
securely.
4.
5.
6.
SECTION 3: OPERATIONS
NOTICE
If you have never used this type of attach-
ment or equipment before, WE STRONGLY
RECOMMEND that you read books, trade
magazines, or get formal training before
beginning any projects. Regardless of the
content in this section, Grizzly Industrial
will not be held liable for accidents caused
by lack of training.
Attaching the
Fretboard
Adjusting Radius
To adjust the radius:
1.
Figure 11
Figure 11.
2.
Example:
Figure
11
3. Step 2
To create a compound radius, the
distance from the fretboard to the swing arm
shaft will be different on each end.
Sanding
To radius a fretboard:
1.
Figure 12
Notice how the swing arm shafts in
Figure 12 are different distances from the
fretboard (to create a compound radius),
but the fretboard is parallel with the sanding
belt.
Figure 12.
2.
3. ON
4.
Cleaning
SECTION 4: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Lubrication
G0577 Parts List
REF PART # DESCRIPTION REF PART # DESCRIPTION
201 P0577201 RADIUS SWING ARM 218 P0577218 BRACE
202 P0577202 CROSS MEMBER 219 P0577219 LOCKING PLATE A
203 P0577203 BTN HD CAP SCR 3/8-16 X 1-1/4 220 P0577220 LOCKING PLATE B
204 P0577204 CROSS MEMBER SHAFT 221 P0577221 GUIDE RAIL A
205 P0577205 SWING ARM SHAFT LEFT 222 P0577222 GUIDE RAIL B
206 P0577206 SWING ARM SHAFT RIGHT 223 PB23 HEX BOLT 5/16-18 X 2-1/2
207 P0577207 COLLAR 224 PLW01 LOCK WASHER 5/16
208 PSS11 SET SCREW 1/4-20 X 1/4 225 PB11 HEX BOLT 5/16-18 X 1-1/2
209 P0577209 HANGER 226 PW07 FLAT WASHER 5/16
210 PSS26 SET SCREW 10-24 X 3/8 227 PN02 HEX NUT 5/16-18
211 P0577211 SPECIAL SCREW 5/16 228 PSB14 CAP SCREW 3/8-16 X 1
212 P0577212 LEVELING BOLT 229 PW02 FLAT WASHER 3/8
213 P0577213 HEIGHT ADJUSTMENT ARM 230 PB18 HEX BOLT 3/8-16 X 1
214 P0577214 HORIZONTAL ADJUST TUBE 231 P0577231 SHIM
215 P0577215 END CAP 232 PN08 HEX NUT 3/8-16
216 P0577216 SHORT SUPPORT BRACKET 233 PB16 HEX BOLT 3/8-16 X 1-1/2
217 P0577217 LONG SUPPORT BRACKET 234 PB58 HEX BOLT 3/8-16 X 2
204
202
203
205
207
211
209
213
215
225
219
220
214
216
218
217
215
222
221
223
208
203
225
203
212
201
234
229
229
229
229
222
221
223
206
203
228
210
227
227
223
231
223
226
226
226
226
223
226
232
233
224
224
224
224
G0577 Parts Breakdown
1 year
WARRANTY AND RETURNS
WARRANTY CARD
The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop
better products and services. Of course, all information is strictly confidential.
1.
2.
3.
4.
5.
6.
7.
8.
9.
We never use names more than 3 times.
10. _____________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
GRIZZLY INDUSTRIAL, INC.
P.O. BOX 2069
BELLINGHAM, WA 98227-2069
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Grizzly G0577 Fretboard Radiusing Attachment
The Grizzly G0577 is a versatile woodworking accessory designed to provide precise and efficient fretboard shaping. It's a great option for luthiers and guitar enthusiasts who demand a professional-grade solution for shaping and sanding their fretboards.
With its robust construction and durable materials, the G0577 ensures long-lasting performance and reliability. It securely attaches to your existing equipment, making it easy to integrate into your workflow. The attachment's compact size and lightweight design allow for convenient storage and portability, adding flexibility to your workspace.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Grizzly G0574 Owner's manual
-
-
Grizzly Industrial G1531 Owner's manual
-
-
-
-
-
-
-
Other documents
-
Neu Home 84773W1P Operating instructions
-
Neu Home 84774W1P Installation guide
-
Neu Home 10779WP Installation guide
-
BodyCraft X2 Family Xpress VKR Option Owner's manual
-
Neu Home 84784W1P User guide
-
-
Rolls PB23 MIC POWER I User manual
-
Fender HM and Standard Series Guitars (Japan 1988) Owner's manual
-
-
Grizzly Industrial G0529 User manual
