2. Scotsman
  3. KBT14A - Use with a 42" wide modular cuber, modular nugget, or flaked ice machines onto a 48" wide bin

Scotsman KBT14A - Use with a 42" wide modular cuber, modular nugget, or flaked ice machines onto a 48" wide bin Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Scotsman KBT14A - Use with a 42" wide modular cuber, modular nugget, or flaked ice machines onto a 48" wide bin Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KBT14A - fits a variety of ice storage bins and ice machines.
Kit contents:
• 2 filler plates
• Tube of sealant
• Support brackets
To Install:
1. Remove 7 inches of gasket from each end of the bin.
2. Lay a bead of sealant in the area where the gasket was removed.
3. Place one bin top
panel on each end of
the bin and push
down to seat the
panel. The insulated side of
the panel faces down.
4. Place ice machine on
bin.
5. Fasten ice machine to bin using the support brackets from the kit and the hardware
from the ice machine.
A32871-001 Rev B.
Instructions
7"
Remove gasket in shaded
areas, then apply sealant.
Gasket
Gasket
/