Sonance SM55 SST User manual

Category
Loudspeakers
Type
User manual

This manual is also suitable for

SONANCE
SURFACE-MOUNT SERIES
Features:
Low-pro le surface-mount design
for ceilings and walls.
Unique magnetic mounting system
for simple installation and instant
connections.
Speaker rotates to align with walls
and xtures.
The new Sonance SM55 and SM55 SST Surface Mount Speakers are the perfect solution for those who demand quality sound but
cannot use in-ceiling or in-wall speakers. In the SM55 and SM55 SST, Sonance engineers have created speakers that sound great, yet
are decor-friendly, easy to install, and do not require a mounting hole. A one-step paint process saves time compared to traditional
anged speakers.
Limited Lifetime Warranty:
For full warranty information, please see the instruction manual.
-OUNTING0LATE
INSTALLEDONCEILING
3-
3PEAKER
BACKSIDE
.EODYMIUM
-AGNETS
4ER MINAL
#ONNECTIONS
Dimensions: Installation Example:
The low-pro le surface-mount design is ideal for installations that cannot accommodate in-ceiling or in-wall speakers. Installation
is extremely simple: Connect the mounting plate to the speaker wire and screw it to a junction box in the mounting location.
The mounting plate rotates, allowing the SM55 and SM55 SST to be aligned with lighting xtures or other decor features after installation.
For installations without a junction box, the speaker can be attached directly to the mounting surface without using the mounting plate.
Speci cations:
SM55
Tweeter: 1” (25mm) silk dome, ferro uid-cooled
Woofer: 5¼” (133mm) carbon ber cone,
with a rubber surround
Frequency Response: 65Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 60 watts maximum
Sensitivity: 88dB SPL (2.83V/1 meter)
Grille Material: Perforated aluminum
Dimensions (W x H x D): 10¾” x 10¾” x 2½”
(273mm x 273mm x 63.5mm)
Shipping Weight: 10 lbs (4.5kg) pair
SM55 SST
Tweeter: Two 1” (25mm) silk domes, ferro uid-
cooled
Woofer: 5¼” (133mm) carbon ber cone,
with a rubber surround, dual voice coil
Frequency Response: 65Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 60 watts maximum
Sensitivity: 88dB SPL (2.83V/1 meter)
Grille Material: Perforated aluminum
Dimensions (W x H x D): 10¾” x 10¾” x 2½”
(273mm x 273mm x 63.5mm)
Shipping Weight: 5 lbs (2.3kg) each
¬v
 MM
¬v
 MM
¬v
 MM
³v
 MM
Sonance
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
800.582.7777
sonance.com
©2008 Sonance, All Rights Reserved. Sonance is a regisered trademark of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product information, go to : www.sonance.com 33-5162
SURFACE-MOUNT SERIES
SM55 AND SM55 SST
SM55
Surface-Mount
Speaker
SM55 SST
Surface-Mount Speaker with
Single Stereo Technology
®
¬v
 MM
¬v
 MM
¬v
 MM
³v
 MM
  • Page 1 1
  • Page 2 2

Sonance SM55 SST User manual

Category
Loudspeakers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI