Issue Date: 2012-04-23 Page 1 of 11 Report Reference # E179824-A50-UL
Copyright © 2012
UL TEST REPORT AND PROCEDURE
Standard:
UL 60601-1, 1st Edition, 2006-04-26 (Medical Electrical Equipment,
Part 1: General Requirements for Safety)
CAN/CSA-C22.2 No. 601.1-M90, 2005 (Medical Electrical Equipment -
Part 1: General Requirements for Safety)
Certification Type:
Classification
CCN:
PIDF, PIDF7 (Medical Electrical Equipment)
Product:
Video Switch
Model:
MNA-110, MNA-120, may be followed with additional characters not
safety relevant.
Rating:
12 Vdc, 2.5 A
Marked on external power supply:
- Sinpro Electronics Co. Ltd,
model HPU63A-105:
100 - 240 VAC, 1.62 - 0.72 A, 47 - 63 Hz.
- Bridgepower Corp., SL Power, Ault,
model MENB1060 - series,
100 - 240 VAC, 1.5 A, 50 - 60 Hz.
- Bridgepower Corp., SL Power, Ault,
model MENB1040 - series,
100 - 240 VAC, 1.2 A, 50 - 60 Hz.
- XP Power L L C,
AFM45US12 - series,
100 - 240 VAC, 1.1 A, 50 - 60 Hz
Applicant Name and Address:
BARCO NV
PRESIDENT KENNEDYPARK 35
8500 KORTRIJK BELGIUM
This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the
above referenced Standards. The products have been found to comply with the requirements covering the category and the products are
judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on
such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the Follow-
Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up
Service under the indicated Test Procedure.
The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety.
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.
Created by UL Document Assembler 2012-05-03 04:32:39 -05:00
