Aaeon BOXER-8110AI User manual

Last Updated: October 22, 2019

BOXER-8110AI

Compact Fanless Embedded AI@Edge Box PC

User’s Manual 4

th

Ed

Preface II

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Copyright Notice

This document is copyrighted, 2019. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

⚫ NVIDIA, the NVIDIA logo, and Jetson are trademarks of the NVIDIA Corporation

⚫ Microsoft Windows is a registered trademark of Microsoft Corp.

⚫ Intel, Pentium, Celeron, and Xeon

are registered trademarks of Intel Corporation

⚫ Atom is a trademark of Intel Corporation

⚫ ITE is a trademark of Integrated Technology Express, Inc.

⚫ IBM and VGA are trademarks of International Business Machines Corporation.

⚫ Ubuntu is a registered trademark of Canonical

All other product names or trademarks are properties of their respective owners.

Preface IV

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

⚫ BOXER-8110AI

1

⚫ Wallmount Bracket

2

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver installation

instructions (if any), to facilitate users in setting up their product.

Users may refer to the AAEON.com for the latest version of this document.

Preface VI

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. All cables and adapters supplied by AAEON are certified and in accordance with

the material safety laws and regulations of the country of sale. Do not use any

cables or adapters not supplied by AAEON to prevent system malfunction or

fires.

3. Make sure the power source matches the power rating of the device.

4. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

5. Always completely disconnect the power before working on the system’s

hardware.

6. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

7. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

8. Always disconnect this device from any AC supply before cleaning.

9. While cleaning, use a damp cloth instead of liquid or spray detergents.

10. Make sure the device is installed near a power outlet and is easily accessible.

11. Keep this device away from humidity.

12. Place the device on a solid surface during installation to prevent falls

13. Do not cover the openings on the device to ensure optimal heat dissipation.

14. Watch out for high temperatures when the system is running.

15. Do not touch the heat sink or heat spreader when the system is running

16. Never pour any liquid into the openings. This could cause fire or electric shock.

Preface VII

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

17. As most electronic components are sensitive to static electrical charge, be sure to

ground yourself to prevent static charge when installing the internal components.

Use a grounding wrist strap and contain all electronic components in any

static-shielded containers.

18. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

19. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received including interference that may cause

undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local government’s recycling or

disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.

Recycler les batteries usées en accord avec les instructions du fabricant et les directives

gouvernementales de recyclage.

Preface IX

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON System QO4-381 Rev.A0

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯

醚(PBDE)

印刷电路板

及其电子组件

×

○

外部信号

连接器及线材

×

○

外壳

○

中央处理器

与内存

×

○

硬盘

×

○

液晶模块

×

○

光驱

×

○

触控模块

×

○

电源

×

○

电池

×

○

本表格依据 SJ/T 11364 的规定编制。

○

：表示该有毒有害物质在该部件所有均质材料中的含量均在

GB/T 26572标准规定的限量要求以下。

×：表示该有害物质的某一均质材料超出了GB/T 26572的限量要求，然而该

部件

仍符合欧盟指令2011/65/EU 的规范。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、电源为选购品。

三、上述部件物质液晶模块、触控模块仅一体机产品适用。

Preface X

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

China RoHS Requirement (EN)

Hazardous and Toxic Materials List

AAEON System QO4-381 Rev.A0

Component

Name

Hazardous or Toxic Materials or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominat

ed biphenyls

(PBBs)

Polybrominat

ed diphenyl

ethers

(PBDEs)

PCB and

Components

X

O

Wires &

Connectors for

Ext.Connections

X

O

Chassis

O

CPU & RAM

X

O

HDD Drive

X

O

LCD Module

X

O

Optical Drive

X

O

Touch Control

Module

X

O

PSU

X

O

Battery

X

O

This form is prepared in compliance with the provisions of SJ/T 11364.

O: The level of toxic or hazardous materials present in this component and its parts is below the

limit specified by GB/T 26572.

X: The level of toxic of hazardous materials present in the component exceed the limits specified

by GB/T 26572, but is still in compliance with EU Directive 2011/65/EU (RoHS 2).

Notes:

1. The Environment Friendly Use Period indicated by labelling on this product is applicable only

to use under normal conditions.

2. Individual components including the CPU, RAM/memory, HDD, optical drive, and PSU are

optional.

3. LCD Module and Touch Control Module only applies to certain products which feature these

components.

 
 
Preface    XI 
Compact Fanless Embedded AI@Edge Box PC
    BOXER-8110AI 
 
Table of Contents 
 
Chapter 1 - Product Specifications ............................................................................................... 1 
1  Specifications ............................................................................................................... 2 
2  Product Notice ............................................................................................................ 3 
Chapter 2 – Hardware Information ............................................................................................. 5 
1  Dimensions .................................................................................................................. 6 
2  Jumpers and connectors ........................................................................................... 7 
3  List of Jumpers ............................................................................................................ 8 
3.1  Setting Jumpers ......................................................................................... 8 
3.2  Auto Power Button (CN5) ........................................................................ 9 
4  List of Connectors ..................................................................................................... 10 
4.1  RTC Connector (CN6) ............................................................................... 11 
4.2  Micro SD (CN5) .......................................................................................... 11 
4.3  PWM FAN connector (CN11) ................................................................... 11 
4.4  USB 2.0 OTG connector (CN9) .............................................................. 12 
4.5  Front Panel, UART for Debug and Exp. I/O (CN17) ......................... 12 
4.6  TX2 Module connector (CN10) ............................................................. 13 
4.7  CANBUS connector (DB9 Female) ....................................................... 14 
4.8  GPIO Port Connector (CN14) ................................................................. 14 
4.9  HDMI connector (CN8) ........................................................................... 15 
4.10  USB3.0 connector (CN7) ......................................................................... 16 
4.11  Power in connector (CN2) ...................................................................... 16 
4.12  COM port connector (Male) .................................................................. 17 
4.13  LAN (RJ-45) Port ....................................................................................... 17 
5  Wall Mount Assembly .............................................................................................. 18 
Chapter 3 – OS Flash guide ......................................................................................................... 19 
1  Force USB Recovery Mode .................................................................................... 20 

Preface XII

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

3.2 Software & BSP .......................................................................................................... 21

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

1.1 Specifications

System

CPU

HMP Dual Denver 2 + Quad ARM A57

Chipset

—

System Memory

8GB LPDDR4

AI Solution

Nvidia Jetson TX2

Display Interface

HDMI 2.0

Storage Device

32GB eMMC 5.1,MicroSD

Ethernet

10/100/1000Base-TX x 1

I/O

USB 3.0 x 2

HDMI x 1 LAN x 1

MicroSD x 1

OTG x 1

Antenna Hole x 1

DC Power Input x 1

2 channel CANBUS x 1

DB-9 RS-232 x 1

Expansion

—

Indicator

—

OS Support

AAEON ACLinux 4.9, Compliance with Ubuntu

18.04

Chapter 1 – Product Specifications 3

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Power Supply

Power Requirement

12V with 2-pin terminal block

Mechanical

Mounting

Wallmount

Dimensions (W x H x D)

110mm(W) x 40mm(H) x 65mm(D)

Gross Weight

2.20 lbs. (1 kg)

Net Weight

1.10 lbs. (0.5 kg)

Environmental

Operating Temperature

Operating Temperature -4°F ~122°F (-20°C ~

50°C, according to IEC60068-2 with 0.5 m/s

airflow; with Industrial Device)

Storage Temperature

-49°F ~176°F (-45°C ~ 80°C)

Storage Humidity

95% @ 40°C, non-condensing

Anti-Vibration

3 Grms/ 5 ~ 500Hz/ operation – eMMC

Certification

CE/FCC class A

1.2 Product Notice

OTG: OTG port is ideally for flashing image only.

COM1: Support 1.8 meter length cable when baud rate 115200bps, and 15 meter cable

when baud rate 9600bps.

USB ports: USB ports are not support USB DVD ROM because of file system.

Chapter 1 – Product Specifications 4

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

Chapter 2

Chapter 2 – Hardware Information

Chapter 2 – Hardware Information 6

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

2.1 Dimensions

Chapter 2 – Hardware Information 7

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

2.2 Jumpers and connectors

Chapter 2 – Hardware Information 8

Compact Fanless Embedded AI@Edge Box PC

BOXER-8110AI

2.3 List of Jumpers

The board has a number of jumpers that allow you to configure your system to suit

your application.

The table below shows the function of each of the board's jumpers

Label

Function

CN5

AT/ATX mode select

2.3.1 Setting Jumpers

You configure your card to match the needs of your application by setting jumpers. A

jumper is the simplest kind of electric switch. It consists of two metal pins and a small

metal clip (often protected by a plastic cover) that slides over the pins to connect them.

To “close” a jumper you connect the pins with the clip.

To “open” a jumper you remove the clip. Sometimes a jumper will have three pins,

labeled 1, 2 and 3. In this case you would connect either pins 1 and 2 or 2 and 3.

1

2

3

Open Closed Closed 2-3

A pair of needle-nose pliers may be helpful when working with jumpers.

If you have any doubts about the best hardware configuration for your application,

contact your local distributor or sales representative before you make any change.

Generally, you simply need a standard cable to make most connections.

Page is loading ...

Aaeon BOXER-8110AI User manual

Aaeon BOXER-8110AI User manual

Related papers

Other documents