Kobe RAX94 SQB-1 Service guide

  • Hello! I am an AI chatbot trained to assist you with the Kobe RAX94 SQB-1 Service guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 1 of 5
Version 20160725
RAX94 SQB-1 Parts Location and Replacement
This basic guide is to show the parts location of the RAX94 SQB-1 and how to remove or install certain parts.
To see more detailed guidelines, please visit: Kobe Service and Repair
For 30” wall mount models: RAX9430SQB-1, RAX9430SQB-DC30-1, RAX9430SQB-DC46-1
For 36” wall mount models: RAX9436SQB-1, RAX9436SQB-DC30-1, RAX9436SQB-DC46-1
Overall Snapshot of RAX94 SQB-1
1. Blower System (Manual Part #7 See “Parts List” page on manual)
2. Control Switch (Manual Part #5 See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #4 See “Parts List” page on manual)
2
1
3
3
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 2 of 5
Version 20160725
Removing the Capacitor Support
Figure 1 Figure 2
Figure 3
4. Capacitor Support (Manual Part #8 See “Parts List” page on manual)
4
4
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. When pulling the wires from the capacitor support, press the ‘push
release’ at the back of the cord.
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 3 of 5
Version 20160725
Accessing the Capacitor and LED Driver
5. Capacitor (Manual Part #9 See “Parts List” page on manual)
6. LED Driver (Manual Part #4 See “Parts List” page on manual)
5
5
6
6
6
6
6
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 4 of 5
Version 20160725
Removing the Control Switch
Figure 1 Figure 2
Figure 3 Figure 4
Accessing the LED Light
For a more detailed guideline,
visit:
How to Replace LED Lights
3
2
2
2
2
Warning: For the
process above, loosen
the screw first with a
hand tool screw driver.
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 5 of 5
Version 20160725
Removing the Blower System
Figure 1 Figure 2
Figure 3 Figure 4
1. Blower System (Manual Part #7 See “Parts List” page on manual)
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. Place a support or hold the blower before removing it.
/