2. Kobe
  3. RAX21 SQB-1
RAX21 SQB-1

Kobe RAX21 SQB-1 Service guide

  • Hello! I am an AI chatbot trained to assist you with the Kobe RAX21 SQB-1 Service guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the part number of the Blower System for the Kobe RAX21 SQB-1?
    How do I access the Capacitor?
    How do I replace the LED Light?
    Which parts of the Kobe RAX21 SQB-1 can I remove or install using this guide?
    What are some warnings I should be aware of when removing parts from the Kobe RAX21 SQB-1?
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 1 of 5
Version 20160725
RAX21 SQB-1 Parts Location and Replacement
This basic guide is to show the parts location of the RAX21 SQB-1 and how to remove or install certain parts.
To see more detailed guidelines, please visit: Kobe Service and Repair
For under cabinet models: RAX2130SQB-1, RAX2136SQB-1, RAX2142SQB-1
For wall mount models: RAX2130SQB-WM-1, RAX2136SQB-WM-1, RAX2142SQB-WM-1
Overall Snapshot of RAX21 SQB-1
1. Blower System (Manual Part #7 – See “Parts List” page on manual)
2. Control Switch (Manual Part #6 – See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #5 – See “Parts List” page on manual)
2
1
3
3
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 2 of 5
Version 20160725
Removing the LED Light Support
Warning: When pulling the wires from the capacitor support, press the ‘push release’ at the back of the cord.
Figure 1 Figure 2
Figure 3
4. LED Light Support (Manual Part #4 – See “Parts List” page on manual)
4
4
4
Warning: Loosen the screw first with a
hand tool screw driver.
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 3 of 5
Version 20160725
Accessing the Capacitor and LED Driver
Warning: When pulling the wires from the capacitor support, press the ‘push release’ at the back of the cord.
Figure 1 Figure 2
Figure 3
5. Capacitor (Manual Part #2 – See “Parts List” page on manual)
6. LED Light Driver (Manual Part #3 – See “Parts List” page on manual)
Accessing the LED Light
For a more detailed guideline, visit: How to Replace LED Lights
5
6
5
6
5
6
5
5
Warning: For the
process above, loosen
the screw first with a
hand tool screw driver.
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 4 of 5
Version 20160725
Removing the Control Switch
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5 Figure 6
2. Control Switch (Manual Part #6 – See “Parts List” page on manual)
2
2
2
2
2
Warning: Loosen the screw first with a
hand tool screw driver.
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 5 of 5
Version 20160725
Removing the Blower System
Figure 1 Figure 2
Figure 3
1. Blower System (Manual Part #7 – See “Parts List” page on manual)
1
1
/