Swiss Madison SM-WC424 Installation guide

Type
Installation guide

Swiss Madison SM-WC424 is a concealed tank system designed for use in residential and commercial bathroom applications. It features a durable construction with a cement board or tile backer board for added strength and stability.

The system includes a variety of components, including a discharge pipe, inlet/outlet pipes, mounting box, thread bolts, and actuator plastic pins. These components allow for easy installation and maintenance.

The SM-WC424 is designed to be installed behind a wall, with only the flush plate and actuator visible. This allows for a clean and modern aesthetic, while also saving space in smaller bathrooms.

Swiss Madison SM-WC424 is a concealed tank system designed for use in residential and commercial bathroom applications. It features a durable construction with a cement board or tile backer board for added strength and stability.

The system includes a variety of components, including a discharge pipe, inlet/outlet pipes, mounting box, thread bolts, and actuator plastic pins. These components allow for easy installation and maintenance.

The SM-WC424 is designed to be installed behind a wall, with only the flush plate and actuator visible. This allows for a clean and modern aesthetic, while also saving space in smaller bathrooms.

INSTALLATION
INSTRUCTIONS
Wall Hung Concealed Tank System
SM-WC424
www.swissmadison.com | 19 Stults Rd, Dayton, NJ 08810 | 1-434-623-4766 | inf[email protected]
Swiss Madison
®
Share your pictures for a feature!
using #SwissMadison
1
Prior to Installation:
If you have any questions or concerns please contact us:
Read instructions thoroughly.
Remove existing toilet.
Be sure to properly bleed all air from the piping system, trapped air can cause
damage to the ushing system and toilet bowl.
We recommend a professional contractor. Customer is responsible for any damage that
may occur during installation.
Additional oor and wall preparations may be necessary to avoid damage to the product
1-434-623-4766
General Recommendations: Read installation and maintenance instructions thoroughly before installation.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
Observe all local plumbing codes.
Swiss Madison recommends using a cement board or tile backer board for the walboard backing,
avoid gypsum board as it may compromise the load strength of the toilet installation.
The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Concealed Tank System.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
2
CONCEALED TANK SYSTEM SPECS
1. Read the complete instruction manual before beginning installation.
2. Conrm that your model will t in intended location and plumbing xtures are
located where legally required before beginning installation.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4. Two people are recommended to install and move this product.
5. The steps depicted in this manual are based on having a cement board or a tile
backer board.
NOTE: Specialized tools may be necessary to install a Swiss Madison Concealed Tank.
SUGGESTED TOOLS AND MATERIALS
44

4

0

3

1

22

NPT

39

12

0
0


4

3

3

2

0

3

Hacksaw Flat FileDrill Level
Tape MeasurePencilSafety Goggles Wrench
Plumbers Tape Coupler
not included
Plumbers Grease Scissors
CONCEALED TANK SYSTEM INSTALLATION
3
1. 2.
12
13
14
15
1617
1
2
3
4
5
7
6
8
9
10
11
18 19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37 -not included
36
Loose Parts:
SM-CPT41 Discharge pipe 2x4
SM-CPT42 Pipes inlet/outlet 2x4
SM-CPT44 4 Pcs bolts 2x4
SM-CPT46 Mounting box 2x4
SM-CPT48 Thread bolt 2x4
SM-CPT51 Actuator plastic pins
Cut-out template
Coupler- not included
A
B
C
B
A
C
1
2
44
0


OR
A
B
13
OR
OR
4
3
OR
19
CONCEALED TANK SYSTEM INSTALLATION
4
5. 6.
3. 4.
A
B
A
B
OR
OR
1
2
“Click’’
1
2
*coupler not included,
please consult your local plumber
CONCEALED TANK SYSTEM INSTALLATION
5
7. 8.
9. 10. 11.
1
2
1
1
Install dry wall over carrier system in
intended location.
Cover installation bolts with protective slip, do not remove slip until
after toilet is in place.
• Find Cut-out template that was included
with your carrier.
• Cut out the small marked holes (1) to
align cutout with threaded bolts.
• Align template up on your wall so the
threaded bolts fit through the previously
cut holes.
• Cut around the marked lines (2) to reveal
pipe/ actuator locations behind the drywall.
2
2
2
CONCEALED TANK SYSTEM INSTALLATION
6
12. 13.
14.
15. 16.
Cut out drywall to reveal where to install ush plate and attach
plumbing.
NOTE: Swiss Madison is not responsible for any damage done to wall or carrier system.
1
19
3
2
17. 18.
19. 20.
21. 22.
CONCEALED TANK SYSTEM INSTALLATION
7
00:00:45
1
2
CONCEALED TANK SYSTEM INSTALLATION
8
23. 24.
25. 26.
27. 28.


1
2
max.

max.

2
CONCEALED TANK SYSTEM INSTALLATION
9
Installing the Toilet.
1. 2. 3.
4. 5. 6.
7. 8. 9.
10.
L2
L1
L1+¹⁵⁄16”
L2
L2+¹⁄8”
L1
depth

12.11.
Swiss Madison® products are made with quality materials and excellent craftsmanship to provide the
customers a long lasting product. In the case of any defects in materials or craftsmanship under regular
use were inspected in the rst year of purchase, Swiss Madison® will provide replacement parts at no
charge, or at its option, replace any product or part of the product that is deemed defective, under
normal installation, use, service and maintenance. This warranty applies only to the original purchaser.
Proof of purchase will be required in the case of a claim.
Swiss Madison® recommends the installations to be made by a licensed, professional plumber.
Swiss Madison® will not be held responsible for any damage or product failure due to improper
installation, misuse, or failure to use a licensed professional. Swiss Madison® is not responsible for any
removal or installation cost.
This One Year Limited Warranty will be voided if:
•The installation recommendations were not followed.
•The product has been moved from it’s initial place of installation.
•The product has been modied.
•The product has been subjected to improper maintenance, abuse, misuse, excessive use of
chemicals, accident or other damages.
Swiss Madison® makes no implication that products comply with any or all local building or plumbing
codes. It is the consumer’s responsibility to determine local code compliance. This warranty extends to
the original purchaser and rst consumer.
Swiss Madison® is not liable for any incidental, co
nsequential or special damages associated with the
return, replacement, installation or use of your product. This includes freight costs, labor, travel time, lost
prot, home damages and other contingent liabilities and costs (including, without limitation, costs
associated with experts, investigations, analyses, attorneys and other professionals and services).
The Swiss Madison® warranty is a comprehensive and explicit limit of liability, and all items outside of it
are not addressable by or the responsibility of Swiss Madison®. Certain states have variances regarding
implied warranties and in those situations we remain fully compliant.
In the case of any questions or a claim contact us directly at 1-434-MADISON (623-4766).
WARNING: Content may contain sharp and other po
ssibly harmful pieces and may cause hazard to
children and adults, Swiss Madison® is not responsible in any way for personal damage.
ONE YEAR LIMITED WARRANTY
1-434-MADISON
(623-4766)
19 Stults Rd., Dayton, NJ 08810
www.swissmadison.com
S
wiss
M
adison

®
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Swiss Madison SM-WC424 Installation guide

Type
Installation guide

Swiss Madison SM-WC424 is a concealed tank system designed for use in residential and commercial bathroom applications. It features a durable construction with a cement board or tile backer board for added strength and stability.

The system includes a variety of components, including a discharge pipe, inlet/outlet pipes, mounting box, thread bolts, and actuator plastic pins. These components allow for easy installation and maintenance.

The SM-WC424 is designed to be installed behind a wall, with only the flush plate and actuator visible. This allows for a clean and modern aesthetic, while also saving space in smaller bathrooms.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI