Limbsaver Comfort-Tech 24024 Operating instructions

Type
Operating instructions

This manual is also suitable for

Comfort-Tech Grip-Wrap
Installation Instructions: For best results, apply at room temperature. Begin with the end labeled “Start
with beveled surface down against the grip, tighten wrap snugly in a counter- clockwise direction,
overlapping the bevel, being careful not to over-tighten. When finished, tuck the end under the last
wrap. Option: Use electrical tape to tape over last 1” on wrap. If the grip is not completely covered,
stretch the wrap more; if it is over- covered, stretch the wrap less.
  • Page 1 1

Limbsaver Comfort-Tech 24024 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI