CPS-MC341-ADSC1-931 First Step Guide
CONTEC CO., LTD. November 2016 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/ English http://www.contec.com/ NA05285 (LYUK071)
Chinese http://www.contec.com.cn/ [11112016]
No part of this document may be copied or reproduced in any form by any means without prior
written consent of CONTEC CO., LTD.
6. Setting IP address
When you use several devices simultaneously, be sure to avoid duplicating the IP address.
1. Start a WEB browser of your PC and access http://10.1.1.101/.
2. The server will ask for your username and password. Enter a user name: “mc341” and a password: “mc341” in
the dialog box.
3. The Status menu appears and select “Network setting”.
4. Enter IP address in the “IP address” and then click the “set”. Set subnet mask and default gateway according to
the environment.
5. Click “Save to ROM” to save the settings. The new IP address will be valid by rebooting the device.
* To reboot the device, you can once turn off the power, press RESET button, or choose “Reboot/Shutdown” in
Status menu of WEB browser.
7. User/Password setting
You can add or change the user name and/or password that are requested when accessing the device.
1. Start a WEB browser of your PC and access the IP address of the device.
2. The server will ask for your username and password. Enter user name: “mc341” and password: “mc341” in the
dialog box.
3. The Status menu appears and select “User/Password setting”.
4. Enter a user name in the “user name” and a password in the “passwd”, then click the “add”. This sets a new
account.
5. To delete a previously registered user account, select the user name you wish to delete, and then click the “del”.
6. Click “Save to ROM” to save the settings. The new user name and/or password will be valid by rebooting the
device.
* To reboot the device, you can once turn off the power, press RESET button, or choose “Reboot/Shutdown” in
Status menu of WEB browser.