User manual
7
2. Put the base on the dry, smooth and horizontal plane, insert the plug into a socket. When
the kettle is inserted into the base, the power puts through automatically and appliance
makes a “bit” sound.
3. Press the On/Off button, appliance enters into standby mode, display light up, appointed
temperature function preset turns on.
4. Press the function button, 100°C indication light on, after 2 seconds start glisten, which
means appliance start boiling water.
5. When water reaches 100°C, appliance makes a “bit” sounds and stops boiling, display shows
water temperature. After ten minutes auto turn off, display turns off. When boiling finished,
you can press the On/Off button directly to turn off the appliance.
6. After use, disconnect the kettle from the socket.
B. Boil water directly to set temperature and keep warm: Direct boil water to set temperature
90°C, 85°C, 60°C, 40°C keep warm at set temperature for 2 hours then auto turn off.
1. Fill in water and close the lid.
2. Put the base on the dry, smooth and horizontal plane, insert the plug into a socket. When
the kettle is inserted into the base, the power puts through automatically and appliance
makes a “bit” sound.
3. Press the On/Off button, appliance enters into standby mode, display lights up, appointed
temperature function preset turns on.
4. Then press the function button, set the desired water boiling and keep warm temperature,
every press of the function button to change the setting: 100°C (fully boiled) > 90°C(Coffee)
> 85°C (green tea) >60°C (White tea) > (Warm water), repeat setting, the selected
temperature indication lights on.
5. After 2 seconds of finish setting, the temperature indication light start glisten, which means
appliance start boiling water to reach set temperature.
6. When water boiled to set temperature, appliance makes a “bit” sound and stops boiling,
then enters keep warm function, display shows water temperature.
7. When water temperature cools down below set temperature, the appliance will reheat the
water to the set temperature range.
8. If you don’t stop and turn off the appliance during keep warm function, the appliance will
keep warm for longest 2 hours, then auto turn off, display turn off.
9. During keep warm, you can press On/Off button resume to standby mode, then press again
to turn off the appliance directly.
10. After use, disconnect the kettle from the socket.
Notice:
• Any time when you need to stop the appliance operation, press the On/Off button to stop it,
appliance resume to standby mode, then press On/Off button again to turn it off.
• When turn on appointed temperature function and select 100°C, appliance will still turn off and
won’t keep warm after water boiled.