DOUBLE WALLED
SMART KETTLE
KASMKTOCHBA, KASMKTOCHBB
Ensure to read all warnings and instructions in this user guide prior to first use. Misuse may
result in injuries. Retain for future reference.
• This kettle is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge unless they have
been given supervision or instruction concerning the use of the kettle by a person
responsible for their safety.
• This kettle is designed for indoor domestic use and non-commercial use (for example,
staff kitchens, offices, hotel rooms, and other residential style environments).
• Do not use outdoors.
• This kettle contains no user-serviceable parts. If the power cord, kettle, or plug is
damaged, stop use immediately and contact help.Kogan.com for assistance.
• Adult supervision is required when the kettle is used around children. Contact with
boiling water may cause severe burns.
• Children should be supervised to ensure that they do not play with the kettle.
• CAUTION: Do not operate the power base unless a water-filled kettle is placed upon it.
• WARNING: Do not spill any liquids onto the power base or the connected power cord.
• Do not use this kettle on unstable surfaces.
• Do not operate the kettle on an inclined plane.
• Do not overfill the kettle. If the kettle is overfilled, boiling water may be bubble over
causing potential injury.
• Ensure the kettle is fully placed on the power base before using.
• Do not operate the kettle unless the element is fully immersed.
• This kettle should be used with a residual current device (safety switch) to lessen the
risk of scalding or other injury from hot water that may be ejected if the heating element
ruptures.
• Misuse may cause potential injury.
• Ensure the lid is closed during use. Steam released from the kettle may cause scalding
burns.
• Do not immerse any part of the appliance in water or other liquid.
• If the power cord connected to the power base is damaged, stop use and contact
help.Kogan.com for assistance.
• Do not allow the power cord to be exposed to water, heat, direct sunlight, or overhang
where it can be pulled to pose a hazard or be damaged.
• Do not use an extension cord with this kettle.
• Do not spill anything on the connector.
SAFETY & WARNINGS
• CAUTION: When opening the lid, keep the steam directed away from the handle.
• Water is the only permitted liquid to be heated in this kettle. Do not place any other
liquid or food product into the kettle.
• The power base supplied with the kettle is designed solely for use with this appliance.
• Do not attempt to use this kettle with any other power base or for any other use.
• The heating element on the power base is subject to residual heat immediately after
use.
• Ensure the kettle is turned off and unplugged before cleaning, maintenance or moving.
• Ensure the kettle is turned off when moving and whenever the kettle is not in use.
• Do not remove the kettle while it is switched on.
• Do not operate the kettle if the amount of water inside is below in the MIN water level
line.
• To prevent damage to the appliance, do not use alkaline cleaning agents. When
cleaning, use a soft cloth and mild detergent.
• WARNING: This kettle contains plasticisers. To prevent plasticisers from migrating to
the finish of a countertop or tabletop, place a non-plastic coaster or placemat between
the kettle and the surface on which the kettle is placed. Failure to do so may result in
permanent blemishes or darkening of the finish.
• The heating element on the power base is subject to residual heat.
1 Display 4 Lid release button
2 Spout 5 Handle
3 Lid 6 Power base
Display
OVERVIEW
Temperature display
Temperature
adjustment
Keep warm
Boil
Power
Prior to first use, boil a full kettle of water and discard to get rid of any impurities that may
have come from other sources.
1. Press the back end of the lid release button to open the lid of the kettle. Fill the kettle
with water until it reaches at least the MIN water level line (0.5L).
2. Place the kettle on the power base and close the lid.
3. Plug the power base cord into a power socket and switch it on. The unit will emit an
audible sound upon powering on and the display screen will flash, then display the
current water temperature in Celsius (°C).
This kettle features two heating modes: ‘Keep warm’ and ‘Boil’.
OPERATION
BEFORE FIRST USE
Notes:
• If the temperature of the water is already higher than the desired set temperature,
pressing the KEEP WARM button will cause the kettle to maintain the water at
the desired temperature.
• The temperature displayed and actual water temperature may vary ±5°C
Keep warm
The keep warm mode allows users to heat the water to a desired temperature between
40 – 90°C. The kettle will then maintain the water at that temperature for up to 2 hours.
• Set the desired temperature by repeatedly pressing the TEMP button ‘ ’. The display
will cycle through the available temperatures (40-50-60-70-80-90°C). The button will
light up and remain lit until the water is heated to the desired temperature.
• Press the KEEP WARM button ‘ ’. The kettle will heat the water to the desired
temperature. The button light up and remain lit whilst the kettle is in this mode.
• The kettle will emit a sound prompt when heating is finished. It will then maintain the
water temperature.
• When this mode is used in the future, the kettle will default with the temperature set as
the previously desired temperature.
Boil
The boil mode allows users to heat the water to 100°C (boiling point).
• Press the BOIL button. The button will light up and remain lit until the water is boiled.
• The kettle will emit a sound prompt when boiling has finished and enter standby mode.
The water is now ready for use.
• The display will show the temperature of the water and change in real-time as it heats
to boiling point.
Standby mode
In standby mode, the display will become blank if there is no operation within 3 minutes.
• Pressing the power button ‘ ’ whilst the kettle is turned off will switch it to standby
mode. The button will be flashing when the kettle is in standby mode.
• Pressing the power button ‘ ’ whilst the kettle is in standby mode will turn off the
kettle.
• The display will show the current temperature of the water within the kettle in this
mode.
Kettle memory
• If the kettle is lifted off the base and placed back on the base within 30 seconds, any
settings or modes will be consistent with what was previously set.
• If the kettle is not placed within 30 seconds, standby mode will be activated.
Burning protection
If there is very little to no water in the kettle whilst the power base is heating, the kettle will
start burning. A safety thermostat will automatically turn the kettle off if there is insufficient
water. The display will show a prompt and the unit will automatically go into standby for
safety.
To reset, remove the kettle from the power base and allow it to cool before refilling with
water.
Heating time limit
• If the heating time is greater than or equal to 15 minutes, the unit will stop boiling
automatically.
• If the temperature does not rise in more than three minutes during heating, the unit will
automatically turn off.
Note:
Ensure both the power base and the kettle are completely dry after cleaning and
before subsequent use.
Before cleaning, ensure the kettle is unplugged and completely cool.
1. Grasp the handle and remove the kettle from the power base. If necessary, wipe
the inside and outside of the kettle with a soft, damp cloth. Mild detergent may be
used. Wipe dry.
2. Wipe the power base with a damp cloth.
Descaling
Descaling may be necessary if mineral deposits form a scale coating inside the kettle.
These scale deposits may cause an unpleasant flavour in the water and can lengthen
boiling times.
Descaling chemicals can be used. Follow the instructions as listed by their manufacturer.
Ensure the kettle is rinsed clean before continuing use.
Alternatively, white vinegar can be used to descale the kettle.
• Combine 3 cups of white vinegar with 2 cups of clean water.
• Pour this solution into the kettle. Do not boil.
• Leave the solution to soak in the kettle overnight.
• Discard the solution and then rinse the kettle out.
• Re-boil water in the kettle and discard, repeating as necessary to remove all vinegar
odour.
• Repeat as necessary until scale is removed.
CLEANING & CARE
Capacity 1.5L
Power 220-240V~, 50-60Hz, 1800-2150W
Temperature settings 40°C, 50°C, 60°C, 70°C, 80°C, 90°C
SPECIFICATIONS
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/
