2. PROAIM
  3. P-HDRP-01

PROAIM P-HDRP-01 User manual

  • Hello! I've reviewed the assembly manual for the PROAIM Car Seat Headrest Bracket P-HDRP-01. This manual provides instructions on how to attach the bracket to a car headrest, secure it with bolts and use the tilting mechanism to attach accessories. I'm ready to assist with any questions you might have about the bracket or the instructions.
  • What size Allen key is needed for assembly?
    How do I remove the car's headrest?
    How is the LCD monitor attached to the bracket?
    What kind of adjustments are possible?
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Car Seat Headrest Plus Bracket (P-HDRP-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
1 x L-Type Allen Key (Size: 5mm)
Proaim Headrest Plus Bracket
2
Feature Of Car Seat Headrest Plus Bracket
Loosen the bolts of the headrest car mount
using the 5mm Allen key. Now, loosen the
clamp aached at the boom of the Headrest
Car Mount .
To remove the Headrest, push the seat's
buon as shown in the image.
Car Seat Headrest Bracket Setup
3
Mount the desired accessory in the Bracket
and posion it per your requirement.
NOTE: The arm has two highlyexible joints
with lng adjustments for your monitor or
accessory at the perfect angle for opmal
viewing comfort.
Insert the Headrest Rod in the Headrest Plus
Bracket, as shown in the image.
Then, re-insert the assembly headrest in the
vehicle's seat.
Aer properly inserng the assembly headrest
into the vehicle's seat, secure all the bolts of
the Headrest Plus Bracket by re-ghtening
them, as shown in the image.
Now, loosen the rachet knob and set the
posion of the Bracket, per your
requirement.
4
Tilng Mechanism Feature
Place the LCD monitor (Not Included) directly
on the Headrest Plus Bracket and secure it by
twisng the 1/4"- 20 screw.
The LCD monitor is properly aached with
Headrest Plus Bracket.
5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM CAR SEAT HEADREST PLUS BRACKET
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
/