2. BenQ
  3. GV31
GV31

BenQ GV31 Important information

  • Hello! I have reviewed the document regarding the USB-C firmware update for the BenQ GV31 projector. This update enables charging iPhones via the USB-C port using a provided tool, and the document outlines a clear step-by-step process. I'm ready to answer your questions about it.
  • What is the purpose of this document?
    What tools are needed for the firmware update?
    How can I update the USB-C firmware on the projector?
It is suggested to keep your projector running with up-to-date benefits from
features, applications, and bug improvement. For more details about
firmware update instruction and improvements, please read through the
following:
Details and Feature Improvements for USB-C firmware
• Support charging iPhone through USB-C port
How to update USB-C firmware to charge iPhone through
BenQ GV31 projector
Required tools and materials
USB-C firmare upgrade tool for GV31
USB-A to USB-C cable (with data transferring available)
BenQ GV31 projector
Step 1:
Operate the USB-C firmare upgrade tool
Step 2:
Turn off GV31, and connect GV31 and your laptop with a USB-A to
USB-C cable (data transferring available required) as the
following picture
You would see the picture below.
Step 4:
Click Update
Step 5:
Click OK to update USB-C firmware
Step 6:
Update in process
Step 7:
Click OK to complete the process
Step 8:
Unplug and plug the cable to check USB-C firmware version again;
you would see the following picture as the following once firmware
is updated successfully.
--- Document Ends ---
/