65-698

Satco 65-698 Wiring Instructions

  • Hello! I've reviewed the Wiring Instructions for the SATCO 65-698 Emergency Battery Back and YH39-2404IL Emergency Conversion Module. This document provides wiring details for installations with dedicated and switched circuits, including the use of two neutrals. It also includes a wiring diagram and emphasizes safety precautions such as disconnecting power before servicing. I'm ready to answer your questions about this device.
  • What should I do if the unit requires service?
    Is the battery replaceable?
    What wiring is required?
Wiring Diagram for 65-698 with Emergency Battery Back with two neutrals.
© Copyright 2021 Satco Products, Inc. 02/23 v1.1
Wiring Installations with
dedicated and switched circuits
and two Neutrals, the second
neutral must be connected to the
(N) Neutral on the LED Driver by
using a jumper cable or a triple
wire connector.
AC Line Switch (L1)
AC Line 24/7 (L)
Neutral
/