Strong SM-CB-ART2-XL Template

14.7 in

27.2 in

24 From

Center

24 From

Center

16 From

Center

16 From

Center

How to create a debris flap to catch drywall dust when drilling:

1. Cut two small vertical slits along the solid vertical lines noted by the red #1 arrows.

2. Fold two side tabs along vertical black dotted lines – noted by the red #2 arrow.

Each tab is located under each slit from step 1.

3. Fold entire bottom tab along horizontal black dotted line – noted by the red #3 arrow.

4. Insert the folded side tabs from step 2 into the slits from step 1.

This manual is also suitable for