ESAB Heliarc HW-4 (SERIES 2) Hand Welding Torch Troubleshooting instruction

ESAB
Brand
ESAB
Model
Heliarc HW-4 (SERIES 2) Hand Welding Torch
Category
Welding System
Type
Troubleshooting instruction

This manual is also suitable for

ESAB Heliarc HW-4 (SERIES 2) Hand Welding Torch is a versatile tool for hand welding, designed for use with a.c., straight-polarity d.c., or reversed-polarity d.c., depending on the job requirements. It features a water-cooled torch body, electrode chamber and torch power cable, making it lightweight and easy to handle, even with extended use. The HW-4 (SERIES 2) is available with either a 12-1/2-ft or 25-ft cable-and-hose assembly, and has a maximum current capacity of 300 amps with a.c. and 250 amps with d.c. using a 12-1/2-ft. cable-and-hose assembly, and 250 amps with a.c.

ESAB Heliarc HW-4 (SERIES 2) Hand Welding Torch is a versatile tool for hand welding, designed for use with a.c., straight-polarity d.c., or reversed-polarity d.c., depending on the job requirements. It features a water-cooled torch body, electrode chamber and torch power cable, making it lightweight and easy to handle, even with extended use. The HW-4 (SERIES 2) is available with either a 12-1/2-ft or 25-ft cable-and-hose assembly, and has a maximum current capacity of 300 amps with a.c. and 250 amps with d.c. using a 12-1/2-ft. cable-and-hose assembly, and 250 amps with a.c.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

ESAB Heliarc HW-4 (SERIES 2) Hand Welding Torch Troubleshooting instruction

ESAB
Brand
ESAB
Model
Heliarc HW-4 (SERIES 2) Hand Welding Torch
Category
Welding System
Type
Troubleshooting instruction
This manual is also suitable for

ESAB Heliarc HW-4 (SERIES 2) Hand Welding Torch is a versatile tool for hand welding, designed for use with a.c., straight-polarity d.c., or reversed-polarity d.c., depending on the job requirements. It features a water-cooled torch body, electrode chamber and torch power cable, making it lightweight and easy to handle, even with extended use. The HW-4 (SERIES 2) is available with either a 12-1/2-ft or 25-ft cable-and-hose assembly, and has a maximum current capacity of 300 amps with a.c. and 250 amps with d.c. using a 12-1/2-ft. cable-and-hose assembly, and 250 amps with a.c.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents