Vivo STAND-V102SF Assembly Instructions

Brand: Vivo

Model: STAND-V102SF

Category: Flat panel floor stands

Type: Assembly Instructions

Vivo STAND-V102SF is a dual monitor desk stand with riser that provides ergonomic support and improves your workspace organization. Here's a brief overview of its capabilities:

Dual Monitor Support: The stand can accommodate two monitors, each with a weight capacity of 15.4lbs (6.99kg), allowing you to create a multi-monitor setup for enhanced productivity.
Height Adjustment: The adjustable pole and arm let you position your monitors at your preferred height, reducing neck and eye strain.
Tilt and Swivel: Each monitor arm offers tilt and swivel adjustments, giving you the flexibility to customize your viewing angles for optimal comfort.

Vivo STAND-V102SF is a dual monitor desk stand with riser that provides ergonomic support and improves your workspace organization. Here's a brief overview of its capabilities:

Dual Monitor Support: The stand can accommodate two monitors, each with a weight capacity of 15.4lbs (6.99kg), allowing you to create a multi-monitor setup for enhanced productivity.
Height Adjustment: The adjustable pole and arm let you position your monitors at your preferred height, reducing neck and eye strain.
Tilt and Swivel: Each monitor arm offers tilt and swivel adjustments, giving you the flexibility to customize your viewing angles for optimal comfort.

Dual Monitor Desk Stand with Riser

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v102sf

SKU: STAND-V102SF

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Pole

C (x2)

VESA Plate

D (x2)

VESA Bracket

M-A (x8)

M4x12

M-D (x8)

M5x16

P (x1)

6mm Allen

Key

K (x2)

Knob

M (x2)

M6x16

N (x8)

M6x14

O (x1)

4mm Allen

Key

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

M-F (x8)

Spacer

M-E (x8)

D5 Washer

E (x1)

Plaform

F (x4)

Leg

G (x1)

Base

H (x1)

Base Cover

I (x1)

M8x40

J (x1)

Support

Plate

M-C (x8)

M5x12

M-B (x8)

M4x16

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

B (x1)

Arm

L (x2)

M3x8

NOTE: SOME HARDWARE MAY NOT BE USED

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

15.4lbs

(6.99kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Phillips

Screwdriver

Install legs (F) to underside of platform (E) using M6x14 bolts (N).

STEP 2

Slide base cover (H) up onto pole (A).

Install base (G) to pole using M6x16 bolts

(M) and tighten with 4mm Allen key (O).

Slide base cover down onto base.

PER SCREEN

STEP 3

Attach pole assembly to platform assembly using M8x45 bolt (I) and support plate (J), and

tighten with 6mm Allen key (P) while making sure base is straight on platform. The cell

phone support lip on the base cover should be facing towards the front.

STEP 4

Slide arm (B) down onto pole to desired height and tighten with 6mm Allen key (N).

STEP 5

STEP 6

OPTION A: Flat Back Monitor

Attach VESA plates (B) to the monitors using bolts (M-A, M-C) with D5 washers (M-E).

OPTION B: Curved Back Monitor

Attach VESA plates (B) to the monitors using bolts (M-B, M-D) with D5 washers (M-E)

and spacers (M-F).

M-A

M-C

M-E

M-B

M-D

M-E

M-F

Remove screw from end of each arm. Slide VESA brackets (D) onto arms, then reinstall

screws.

STEP 7

Slide VESA plates with monitors onto heads of VESA brackets. Secure using the

knobs (K) with M3x8 bolts (L). Slide monitors together to eliminate center gap and

tighten VESA brackets to arms using 4mm Allen key (O).

STEP 8

If needed, adjust tilt joint support using 6mm Allen key (N).

Note : When attaching the

monito r screens , pleas e hol d

the othe r end of the monito r

crossbar for balance.

NOTE: When attaching the monitor

screens, please hold the other end

of the monitor crossbar for balance.

STEP 9

Use cable clip on pole to organize cables. Store Allen keys in

cable clip when not in use.

STEP 10

Adjust monitor to desired viewing angle. Turn knobs (K) using 6mm Allen wrench (P) to

adjust monitor level if needed. Smartphone may be placed in holder on base cover.

Warning: Please don't

push the monitor arm to

more than 15 degrees.

Or else, it will cause the

monitor to tip over.

15°

+45°

-45°

±20°

±180°

Warning: Do not push the

monitors back more than

15 degrees. Otherwise,

the stand may tip over

and cause damage.

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected]

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Vivo STAND-V102SF Assembly Instructions

Brand: Vivo

Model: STAND-V102SF

Category: Flat panel floor stands

Type: Assembly Instructions

Vivo STAND-V102SF is a dual monitor desk stand with riser that provides ergonomic support and improves your workspace organization. Here's a brief overview of its capabilities:

Dual Monitor Support: The stand can accommodate two monitors, each with a weight capacity of 15.4lbs (6.99kg), allowing you to create a multi-monitor setup for enhanced productivity.
Height Adjustment: The adjustable pole and arm let you position your monitors at your preferred height, reducing neck and eye strain.
Tilt and Swivel: Each monitor arm offers tilt and swivel adjustments, giving you the flexibility to customize your viewing angles for optimal comfort.

Download PDF

report

Vivo STAND-V102SF Assembly Instructions

Vivo STAND-V102SF Assembly Instructions

Related papers

Other documents