Philips SB7220 User manual

Category
Portable speakers
Type
User manual

This manual is also suitable for

Philips SB7220: Listen to your favorite tunes wirelessly with Bluetooth connectivity, compatible with devices like iPads, iPhones, iPods, Android phones, and laptops. Position the speaker horizontally or vertically to suit your space. Activate the Smart Sensor with a double press to control music playback with intuitive hand gestures. Enjoy clear audio and easily adjust the volume using the controls on the left speaker when pairing two speakers. The rechargeable battery provides up to 8 hours of playtime, and you can charge the speaker using the included power adapter or a USB cable.

Philips SB7220: Listen to your favorite tunes wirelessly with Bluetooth connectivity, compatible with devices like iPads, iPhones, iPods, Android phones, and laptops. Position the speaker horizontally or vertically to suit your space. Activate the Smart Sensor with a double press to control music playback with intuitive hand gestures. Enjoy clear audio and easily adjust the volume using the controls on the left speaker when pairing two speakers. The rechargeable battery provides up to 8 hours of playtime, and you can charge the speaker using the included power adapter or a USB cable.

MODE
Specifications
Amplifier
Rated output power: 2 X 4 W/ THD 2%
Signal to noise ratio: LINE-IN/Bluetooth > 65dB
LINE-IN: Input sensitivity 230mV RMS
Connectivity
Bluetooth profiles: A2DP, AVRCP, HFP, HSP
Bluetooth version: 2.1
General information
Power adapter
Philips EFA01200500200CE
Input: 100-240 V~ 50/60 Hz, 0.4A;
Output: 5 V DC 2 A
Charging
maximum 200 mA for USB, 800 mA for power adapter
(power off)/ 200 mA for operation
Power supply
1,500 mAh Li-ion polymer internal rechargeable battery
Power consumption (AC power)
Operation: < 10 W
Power off: ≤ 0.5 W
Extra - Pair two SHOQBOX speakers
Gesture control
Press twice to switch the Smart Sensor on or off.
Voice feedback\ Language options
When the speaker is on, press once to get the voice
feedback on battery level. To select a language, press and
hold the button when the speaker is off until you hear
language options. Press the button to confirm your option.
\
Charge
MODE & RESET
RESET
If there is no music playback or connection for three
minutes, the amplifier on the speaker switches off to save
power. The blue light flashes at intervals.
To resume, change the volume or restart music playback.
15 minutes after the amplifier switches off, the speaker
switches off. The blue light turns off.
To switch on, press the power button.
LINK-IN:
Bluetooth A2DPAVRCPHFPHSP
Bluetooth 2.1
AC
< 10 W
<= 0.5 W
Flashing red light: Power charging ongoing
Red light off: Power charging complete
(for charging)
3분 동안 음악 재생 또는 연결이 되지 않은 경우
전력절약을 위해 스피커의 앰프는 꺼집니다. 청색 등이
일정간격으로 깜박입니다. 다시 켜려면 볼륨을 변경하거나
음악을 다시 재생하십시오. 앰프가 꺼지고 15분이 지나면
스피커의 전원이 꺼집니다. 전원을 켜려면 전원 버튼을
누르십시오.
추가 - SHOQBOX 스피커 두 대 페어링
1.
The first time you connect two speakers, place them
horizontally and together.
2.
Switch on the speakers (Follow
Step
a
in Connect).
3.
Press MODE twice to switch on the
Smart Sensor.
4.
Start pairing as shown: swipe from left to
right on the left speaker, and at the same time, swipe from
right to left on the right speaker. Wait one minute until the
you hear the voice feedback "Left speaker" and "Right
speaker". The two speakers are paired successfully. Connect
your Bluetooth device to the speakers.
The Left speaker is the master one. With the volume control
on the Left speaker, you can adjust the volume on both
speakers.
To unpair, switch the two speakers off.
1.
2.
3.
4.
1.
두 대의 스피커를 처음 연결하는 경우 두 대를 함께
수평으로 놓으십시오.
2.
스피커의 전원을 켜십시오(연결의 1
단계를 따르십시오).
3.
Smart Sensor를 켜려면 버튼을 두 번
누르십시오.
4.
그림과 같이 페어링을 시작하십시오. 왼쪽
스피커에서 왼쪽에서 오른쪽으로 쓸어 넘기는 것과 동시에
오른쪽 스피커에서 오른쪽에서 왼쪽으로 쓸어 넘기십시오.
"왼쪽 스피커" 및 "오른쪽 스피커" 음성 피드백이 들릴 때까지
1분간 기다리십시오. 스피커 두 대가 성공적으로
페어링되었습니다. Bluetooth 장치를 스피커에 연결하십시오.
왼쪽 스피커가 마스터 스피커입니다. 왼쪽 스피커의 볼륨
컨트롤로 두 대의 스피커 볼륨을 조절할 수 있습니다.
페어링을 해제하려면 스피커 두 대를 모두 끄십시오.
- 2 SHOQBOX
앰프
정격 출력 전력:
2 X 4 W/ THD 2%
신호 대 소음비:
라인 인/ Bluetooth > 65dB
라인 인:
입력 감도 230mV RMS
연결 방법
Bluetooth 프로파일
A2DP, AVRCP, HFP, HSP
Bluetooth 버전
2.1
일반 정보
전원 어댑터
필립스 EFA01200500200CE
입력: 100-240V~, 50/60Hz, 0.4A
출력: 5V DC 2A
충전
USB: 최대 200mA, 전원 어댑터:
800mA(전원꺼짐)/200mA(작동 시)
전원 공급 장치
1,500mAh 리튬 이온 폴리머 내장형 충전식
배터리
전력 소비량(AC 전원)
작동 시: < 10W
전원 꺼짐: <= 0.5W
1 sec
충전
동작 컨트롤
Smart Sensor를 켜거나 끄려면 버튼을 두 번 누르십시오.
음성 피드백\언어 옵션
스피커가 켜져 있는 상태에서 버튼을 한 번 누르면 배터리
잔량에 대한 음성 피드백을 받을 수 있습니다. 언어를
선택하려면 스피커가 꺼져 있는 상태에서 언어 옵션이 들릴
때까지 버튼을 누른 채로 잠시 기다리십시오. 버튼을 눌러
옵션을 확인하십시오.
적색등 깜박임: 전원 충전 중
적색등 꺼짐: 전원 충전 완료
(충전용)
제품사양
  • Page 1 1
  • Page 2 2

Philips SB7220 User manual

Category
Portable speakers
Type
User manual
This manual is also suitable for

Philips SB7220: Listen to your favorite tunes wirelessly with Bluetooth connectivity, compatible with devices like iPads, iPhones, iPods, Android phones, and laptops. Position the speaker horizontally or vertically to suit your space. Activate the Smart Sensor with a double press to control music playback with intuitive hand gestures. Enjoy clear audio and easily adjust the volume using the controls on the left speaker when pairing two speakers. The rechargeable battery provides up to 8 hours of playtime, and you can charge the speaker using the included power adapter or a USB cable.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages