30
the DC power port on your Tablet. The tablet will start charging.
Method 2. Connect the USB / micro usb cable supplied to the micro usb port of
the tablet and with the tablet turned o plug it into a rear USB port of your PC.
You can also purchase usb chargers approved: APPUSBWALLIP or
APPUSBWALLV4
The charging and discharging of the battery must be complete, never less
than 5 hours. Do not disconnect the charger the full charge of the battery is
completed, otherwise it will shorten the battery life.
on/o button
To switch the device on hold the on / o position until the screen comes on.
Once the system loads click on the lock icon and drag it to the right as seen in
the following image:
Dragging left displays the camera directly
To switch the device on hold the on / o position until it appears on the screen
the message to turn o the device and accept.
Connect the tablet to your PC to transfer les.
Turn on the device and once unlocked connect via the supplied usb cable to the
PC, the interface will show “USB Connection”, click on “Turn on USB storage”, it
will display the storage medium of the memory of the tablet on your PC. Now
you can transfer data between your PC and the tablet.
Wi connection
Select’’ Settings’’, “wireless and network connections”, ‘WiFi’ and activate it. The
device will show automatically detected networks, select and enter the desired
password if network security is protected. Once connected, the wireless network
icon. as connected to the main screen.
Reset button
In case of system crash or no response, enter a click or needle into the reset hole
and press for 3 seconds the micro reset switch.