SPECIFICATIONS

1. Bluetooth Version: V3.0+EDR

2. Bluetooth Proles: A2DP, AVRCP, HSP, HFP

1. Automatic switching in between conversations and music, you will not miss any incoming calls while listening to

music.

2. Automatic connecting with the last paired device when headset is turned on.

3. Battery life is displayed on iOS devices.

4. Multilink technology allows simultaneous connection to two dierent devices. Simply repeat the pairing process on

both devices. If you are pairing this headset with another type of smart phone or tablet, you may need to consult that

device’s user manual for specic pairing instructions.

5. Voice prompt is in English. The voice notice comes directly through the headset and tells what the current status is

about.

PRODUCT OVERVIEW

6. + Volume up

7. – Volume down

8. Build-in microphone

connected, the LED light will keep blinking blue.

Note:

1. Specic pairing procedures may vary with dierent mobile phones. Please refer to your device’s user manual for

specic pairing instructions.

2. If the pairing is not successful, please turn o the headset and turn on the headset to enter the pairing mode again.

3. Device will automatically connect to the last connected Bluetooth device.

CHARGING

1. Plug the Micro USB cable into the charging port. It takes about 4 hours to fully charge from an empty battery. When

the battery is full, LED light will turn blue.

2. First time charging battery, please be sure the battery has been charged fully before use.

5. Flashing Red > Battery almost drained

6. Flashing Blue > Battery is recharging

HOW TO TAKING PHONE CALLS / PLAYING MUSIC

You can use this headset to receive and make phone calls. When you receive an incoming call, the music will

automatically pause. Press the On/O button to answer phone calls. Your voice will be picked up through the built-in

microphone.

1. Power on/o: Press the On/O button for 3 seconds.

2. Answer/end call: Press the On/O button to answer or end call.

3. Make a call: Use your phone to dial as usual. Listen and talk through this headset.

4. Reject a call: Hold the On/O button for 1 second.

10. Volume: Press + button to volume up and press - button to decrease volume.

Note:

1. The built-in microphone only works when connected to a Bluetooth device supporting HFP,

HSP proles.

2. The media controls only work when connected to a Bluetooth device supporting AVRCP prole.

3. When the volume is adjusted to maximum or minimum, you will hear an indication tone.

Warning: Excessive pressure from headphones can cause hearing loss.

WARNING / MAINTENANCE

Read all instructions and warnings prior to using this headset. Improper use of this product may result in product

damage, excessive heat, re or explosion, for which damage you (“Purchaser”), and not BH-530 or Manufacturer are

5. Never dispose of batteries in the garbage. Always take used batteries to your local battery recycling center.

6. Do not use this product near water or swimming pool.

7. Do not wash the headset with harsh chemicals, soaps or detergents.

8. Re-charge your headset once every three months when it is not in use.

9. Close supervision is necessary when used near children.