Xerox MajestiK 5760 Installation guide

Category
Multifunctionals
Type
Installation guide

This manual is also suitable for

Splash PCI Series v6.0
Set-Up Manual
Splash Technology
Sunnyvale, California USA
Page 2 Splash PCI Series v6.0 Set-Up Manual
Trademarks and Copyright
Splash and the Splash logo are trademarks of Splash Technology Inc. Apple, Macintosh, LaserWriter, and Apple-
Talk are registered trademarks of Apple Computer, Inc. MajestiK, Regal, and DocuColor are trademarks of Xerox,
Incorporated. Acolor is a trademark of Fuji Xerox, Inc. Novell Netware is a trademark of Novell, Inc. Adobe, the
Adobe logo, Adobe Illustrator, PostScript, Adobe Type Manager, Adobe PageMaker, and Adobe Photoshop are
trademarks of Adobe Systems Incorporated, which may be registered in certain jurisdictions. QuarkXPress is a reg-
istered trademark of Quark, Inc. Stuffit Expander Copyright © 1990-1997. All other brand or product names are
trademarks of their respective holders.
Copyright © 1998 Splash Technology, Inc.
PN: 0014695-0101
Last revised: March 2, 1998. Your rights of ownership are subject to the limitations and restric-
tions imposed by the copyright laws as outlined below.
PROPRIETARY RIGHTS NOTICE. The digitally encoded machine readable outline data for producing the type-
faces provided as part of your laser printer is copyrighted © 1981 Linotype-Hell AG. Copyright © 1993 Adobe Sys-
tem Incorporated. All Rights Reserved. This data is the property of Linotype-Hell AG and Adobe Systems
Incorporated and may not be reproduced, used, displayed, modified, disclosed or transferred without the express
written approval of Linotype-Hell AG and Adobe Systems Incorporated.
LZW Patent Notice:
This Licensed System includes an implementation of LZW licensed under U.S. Patent
4,558,302.
U.S. Government Users:
The Adobe Licensed System provided with this product is a “commercial item” as that
term is defined at 48 C.F.R. 2.101 (OCT 1995), and more specifically “commercial computer software” and “com-
mercial computer software documentation” as such terms are used in 48 C.F.R. 12.212 (SEPT 1995). Consistent
with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (JUNE 1995), the Licensed System is pro-
vided to U.S. Government End Users (a) only as a commercial end item and (b) with only those rights as are granted
to all other End Users pursuant to the terms and conditions herein.
It is against the law to copy, reproduce, or transmit including, without limitation, electronic transmission over any
network any part of the manual or program except as permitted by the Copyright Act of the United States, Title 17,
United States Code. Under the law, copying includes translation into another language or format. However, you are
permitted by law to write the contents of the program into the machine memory of your computer so that the pro-
gram may be executed. You are also permitted by law to make working copies of the program, solely for your own
use, subject to the following restrictions: (1) Working copies must be treated in the same way as the original copy;
(2) If you ever sell, lend, or give away the original copy of the program, all working copies must also be sold, lent,
or given to the same person, or destroyed; (3) No copy (original or working) may be used while any other copy
(original or working) is in use except within the terms of this license. The copyright notice that is on the original
copy of the program must accompany any working copies of the program.
The above is not an inclusive statement of the restrictions imposed on you under the Copyright Act. For a complete
statement of the restrictions imposed on you under the copyright laws of the United States of America, see Title 17,
United States Code.
FCC Compliance
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his or her own expense.
Shielded cables must be used with this equipment to maintain compliance with FCC regulations.
Page 3
Canadian DOC Notice
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-
tions.
CET APPAREIL NUMERIQUE DE LA CLASSE A RESPECTE TOUTES LES EXIGENCES DU REGLEMENT
SUR LE MATÉRIAL BROUILLEUR DU CANADA.
Japanese VCCI Statement
CE Mark
DECLARATION OF CONFORMITY
We, Splash Technology, Inc., declare under our sole responsibility that the Splash products to which this declaration
relates are in conformity with the following standards or other normative documents:
EN55022/CSPR22 CLASS B
EN0082-1/IEC 801-2,3,4
following the provisions of:
89/336/EEC-EMC Directive
Splash Technology, Inc. 555 Del Rey Avenue, Sunnyvale, CA. 94086 USA
The signed and dated Declaration of Conformance is on file at the above address.
Page 4 Splash PCI Series v6.0 Set-Up Manual
Contents Page 5
Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Splash PCI Series v6.0 Server Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
System Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Registration Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Compatible Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
An Overview of Splash Adobe PostScript Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
About The Splash Server Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Chapter 1 — Setting Up the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Connecting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Splash Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Setting Up the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Copier Set-Up Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Disable the Built-In Auto Tray Switching Option . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Installing the Splash Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Setting Up TCP/IP and Novell NetWare
Client Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Installing the Splash Plug-Ins for
Adobe Photoshop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Splash Server System Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Disk Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Memory Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Splash Server On-Line Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Page 6 Splash PCI Series v6.0 Set-Up Manual
Chapter 2 — Using the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Starting and Stopping the Server Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Working With the Splash Server Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Starting and Stopping Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Working With Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Moving Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Viewing and Editing Print Options for a Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Deleting Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Setting Default Print Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Setting Duplex Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Checking a Print Job for Errors Before You Print . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Setting Splash Server Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting Server Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting Page Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting Network Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Setting Color Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting Server Screening Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Setting Server Style Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting CMYK Color Correction Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Drop Printing Files to Splash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Drop Printing Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Starting a Log File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Printing the Job Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Job Log Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Adding Fonts to the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Enabling Font Downloading at the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Downloading Fonts to the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Font Downloading Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Splash Server Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Increasing the Maximum Number of Jobs That
Can Be in the Print Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Disable Type Reunion Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Running Other Applications on the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Print Job Name Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
RIP While Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Look Ahead Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Contents Page 7
Job Processing Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Customizing the Splash Color Control Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Switching Network Protocols for the Splash Server . . . . . . . . . . . . . . . . . . . . . . . . .67
Disabling EtherTalk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Server Disk Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Servers With Many Fonts Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Splash Server Troubleshooting Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Installer Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Job Previews Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
PostScript Error Reported for a Successful Print Job . . . . . . . . . . . . . . . . . . . . . . . .68
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Page 8 Splash PCI Series v6.0 Set-Up Manual
Introduction Page 9
Introduction
Thank you for purchasing a Splash Professional Color Imaging Series Server.
The Splash
PCI Series Server is a pre-configured PostScript print server designed
for the Xerox MajestiK, Regal, DocuColor 5799, or Acolor Series of digital color
copiers. The Splash PCI-E Series Server is for use with the DocuColor 5750 or
Acolor 620 series copiers. The Splash Server uses true Adobe
PostScript
processing to deliver high-quality color images. Each Splash Server can be
connected to a single copier unit.
Your Splash Server is pre-configured with all software and hardware needed to
work as a powerful and flexible network print server. This manual describes how to
connect the hardware pieces included in the Splash PCI Series Server package, and
how to set up the system to function as a print server. Information about how to
install the Splash printing software on Macintosh
®
, Microsoft
®
Windows 3.1,
Windows 95, and Windows NT client computers, as well as detailed information
about Splash print features and product specifications are provided as on-line
documentation (pre-loaded on your Splash Server computer).
Product Features
All models of the Splash Professional Color Imaging Series Server provide:
The Splash Server application. This true Adobe PostScript
CPSI software
(Configurable PostScript Interpreter Raster Image Processor) converts
Level 1, 2, and Level 3 PostScript code into a pixel-by-pixel page description
that the printer/copier uses to print an image. The open platform Macintosh
architecture enables you to use virtually all commercially available Macintosh
hardware and software applications with Splash, including color management
systems and a variety of media input devices.
Printer drivers for local and network printing on a Macintosh. These drivers
convert the output from your applications to PostScript code.
Page 10 Splash PCI Series v6.0 Set-Up Manual
Printer driver software for network printing from a personal computer running
Microsoft Windows NT, plus custom printer description files for printing to
Splash from Windows 95 or Windows 3.1. This software requires a PC-to-
Macintosh network bridge (such as Novell NetWare or Miramar MACLAN
Connect), or a TCP/IP network connection (Windows 95 or Windows NT).
Direct IPX printing. Provides an easy way for computers connected to a
Novell NetWare server to print to Splash. You do not need to install AppleTalk
connection software. Splash creates a native Novell IPX connection from the
Splash Server to the Novell server. Once set up and activated, it operates
automatically to send print jobs to the Splash Server each time a Novell client
computer prints to the Splash print queue on the Novell NetWare server. Splash
IPX printing is simple to set up and supports all Novell Ethernet frame types.
See the chapter “Setting Up TCP/IP and NetWare Direct Printing to Splash” in
the
Splash Reference
on-line manual for more information.
TCP/IP Direct Printing. Enables UNIX-style LPD/LPR printing to Splash over
a TCP/IP network. See the chapter “Setting Up TCP/IP and NetWare Direct
Printing to Splash” in the
Splash Reference
on-line manual for information.
Selectable full-color, screened, or high-speed grayscale printing for a wide
variety of page image sizes. See the
Splash Reference
on-line manual for a
complete list of supported page image sizes.
RGB color correction that enables each client workstation to match printed
output to its specific monitor. The powerful RGB color correction provides the
ability to color correct problem files properly and to show true blue colors
without any purple shift.
CMYK color correction that provides highly accurate press ink matching
for your color press proofs. Splash CMYK color correction automatically
compensates for differences between toner colors and press ink colors to
produce the closest possible match to press inks in the copier output.
Powerful mixed file color correction support. Splash is the first PostScript
server to separately color correct RGB and CMYK color types for a file. This
enables you to properly print many “problem” files with no adjustment.
ICC color output profiles for use with Apple’s ColorSync™ 2.5 color
management software. The custom ICC profiles enable Splash to support
multiple platforms and multiple CMS capabilities.
Adobe Photoshop Separation Tables for Splash. Enable you to use the
Adobe Photoshop Separations feature to create CMYK separations for
printing to Splash.
Introduction Page 11
Separations support. Prints a composite proof for your separations documents
(including DCS files). With this Splash feature you can use any number of
color plates in your document. Splash simulates the full range of colors and
tints for HKS, PANTONE, DIC, or Toyo colors. You no longer need to convert
spot colors to process colors before you print. Splash separations enhance
workflow for color plate production.
The Splash Acquire plug-in module, for CMYK scanning locally with the
printer/copier using Adobe Photoshop. Scanning is performed directly into the
Splash Server (not over the network) to avoid network transfer delays.
The Splash Export plug-in module, for printing scanned images in
Adobe Photoshop directly to the printer/copier. This command prints directly
to the copier to avoid network transfer delays.
RIP While Receive. Splash RIPs a file as it is received whenever it is not
processing another job, which adds tremendous productivity gains in most
customer environments.
Continual Print. For many documents, Splash can process and print files at
copier-rated speeds. This feature is applied to print jobs at the printer driver.
Spool File Handling Options. For situations where the same, large PostScript
file is reprinted from time to time, the ability to save the spool file at the Server
can lead to significant productivity gains. The Splash Server can be configured,
if necessary, to spool all incoming files.
Job Ticketing. Macintosh clients can enter identification or job information in a
comment field for each job. Comments entered at the printer driver can be
viewed at the Splash Server and in the server’s printing log.
Save as TIFF. This feature enables designers to send a file to the Splash
Server and then to view a bitmap of the processed file without leaving their
workstations. Combined with separations support, this enables a designer to
view overprint and trapping effects during the design process, without the need
to actually make a print and go to the printer/copier to retrieve it. Most DTP
applications do not enable these effects to be viewed directly on the screen in
the application. This can significantly increase productivity during the
design process.
Progressives support. You can print up to four sheets of paper for a color
document with any combination of C, M, Y, and K color passes on each sheet.
This enables you to examine the result of adding each color pass to a print job.
Splash ColorCal. Software that calibrates Splash for consistent, accurate color,
regardless of changes in the copier’s color output that occur over time and
with changes in the environment. Splash ColorCal is a powerful tool for the
professional color image designer, but it is useful also for anyone who creates
Page 12 Splash PCI Series v6.0 Set-Up Manual
business graphics or other less-technical color documents. Splash ColorCal
requires no special color knowledge and does not require the use of an
expensive densitometer. Splash ColorCal enables you to create and use
your own CMYK color profiles. You can perform multiple calibrations and
save each with a unique name--for example to use with different media--and
associate each calibration with a copier tray. See the chapter “Calibrating With
Splash ColorCal” in the
Splash Reference
on-line manual for more informa-
tion.
Look Ahead Routing. This smart look-ahead capability determines if there are
any other files in the queue before yours. If not, then the Splash Server will
immediately begin to RIP your file. If another file is ahead of yours, the Splash
Server automatically spools your file. Multiple files can be received by the
Server at the same time. Jobs are placed in the print queue in the order in which
they have completed spooling. This prevents large jobs from blocking smaller
jobs that are sent to the Server at the same time.
Print Job Preflighting. Screen spooled print jobs at the Splash Server for
PostScript errors before they print.
Splash Drop Printing. Print PDF, TIFF, EPS, and files in PostScript format, at
the Splash Server or from any AppleTalk network client, without using a spe-
cial PostScript file downloader utility. Simply drag the graphics file directly
onto the Splash Server application window, or place them in the shared Drop
Folder on the Splash Server Power Macintosh.
A Macintosh Client Status Desk Accessory (DA). The Splash Status DA lets
you view and control print jobs, and receive printer/copier and server status
remotely from any Macintosh Client.
Optional Internet or Intranet Web Print Queue Manager. Enables remote clients
on any computer platform to view and control their print jobs at the Splash
Server. Requires a TCP/IP connection to the Splash Server and Netscape
Navigator 3 (or later) or Microsoft Internet Explorer 3 (or later) web browser.
See the chapter “Setting Up the Splash Web Queue Manager” in the
Splash
Reference
on-line manual for more information.
136 Adobe Roman fonts. See the
Splash Reference
on-line manual for a
complete list of fonts supplied with the Splash software.
Adobe PostScript Level 2 support for automatic decompression of embedded
JPEG files prior to printing. This results in a significantly reduced transfer time
when printing JPEG files over a network.
A detailed, accurate log of print activity, to simplify tracking and billing.
Format commands let you show customer subtotals in the printed log.
Introduction Page 13
Ability to generate and view thumbnail preview images of all pages of a docu-
ment for viewing on the Splash Server interface.
Duplex alignment feature to allow you to set the vertical and horizontal offsets
for all duplex jobs. This is used in conjunction with the Manual Duplex
Printing feature that allows you to print duplex documents correctly.
Splash PCI Series v6.0 Server Models
The Splash PCI-E 640 Server provides:
64 MB of frame buffer memory to support the on-board PostScript Level 3
RIP. Upgradable to 128 MB.
400 x 400 dpi full contone printing for page sizes up to A4/Letter; visually
lossless 400 x 400 dpi for page sizes up to A3/11x17.
The Splash PCI 1280 Server provides:
128 MB of frame buffer memory to support the on-board PostScript
Level 3 RIP.
400 x 400 dpi full contone printing for all page sizes (with Document
Mode off).
System Notes
IMPORTANT: All of the sections and procedures that appear in this manual
assume that the Xerox printer/copier has been correctly installed, and is currently
functioning as a copier. In addition, the Xerox IFU Port Kit, part number
98K32870, must be installed in the Xerox MajestiK, Regal, or DocuColor Series
copier by a Xerox Service Representative. The IFU Port Kit provides the connection
port necessary for the Splash Server.
If there is a problem with the copier, contact Technical Support before you proceed
with setup of the Splash Server.
You must provide networking hardware and software for all client workstations
that will print to the Splash Server. Refer to the information provided with your
network products for instructions on how to connect the Splash Server and client
workstations to the network.
Additional internal memory may be required to run other applications on the Splash
Server (the Macintosh directly connected to the printer/copier), or to run multiple
Splash applications at the same time.
Page 14 Splash PCI Series v6.0 Set-Up Manual
To run the Splash Web Queue Management option you must install additional
system memory on the Splash Server computer.
IMPORTANT: Applications running on the Splash Server may respond slowly
while the Splash Server is processing print jobs. Avoid using other application
software on the Splash Server computer while the Server application is running.
Registration Card
Be sure to complete the Splash Registration Card and mail it to Splash Technology.
You will receive software upgrade notifications for your Splash Server.
Compatible Applications
The Splash Server prints PostScript-based files. The following Macintosh and
Windows applications have been tested with Splash:
QuarkXPress
®
Adobe Illustrator
Adobe PageMaker
®
Macromedia FreeHand
®
Adobe Photoshop
Microsoft Excel
Microsoft Word
Microsoft PowerPoint
The Splash Acquire and Export plug-ins require Adobe Photoshop v4.0 or later to
operate. Other applications that support Adobe Photoshop plug-ins may work with
Splash Acquire and Export, but have not been tested with the Splash Server.
Introduction Page 15
An Overview of Splash Adobe PostScript Printing
The
Splash Server application
is the software that controls printing and
color correction.
The Splash Professional Color Imaging Series Server computer is called the
Splash Server
. The Splash Server is connected directly to the printer/copier.
A Macintosh or Windows-based personal computer (Windows 95, Windows 3.1, or
Windows NT v4.0 or later) attached to the Splash Server by a network connection is
called a
Client.
The Splash Server supports:
N
etwork printing
from client workstations connected to the Splash Server.
L
ocal printing
from applications run on the Splash Server.
Client workstations need to install the
Splash printer driver
software to apply the
Splash printing features (such as color correction) to print jobs. Splash provides
custom client print drivers for Macintosh and PC workstations.
The Splash Server spools, processes, and performs color correction on the files
you print. The Splash Server application and the Splash printer driver control
the printing.
When you print a file to the MajestiK, Regal, DocuColor, or Acolor series
printer/copier:
1. The Page Setup options available in each application come from the custom
Splash printer driver. When a file is sent to print, the printer driver converts the
commands generated by the application into PostScript code.
PC
Mac
Splash
Network (Client) Printing
Local Printing
Printer/copier
Printer/copier
Splash
Server
Client Workstations
MacMac
Network
server
Server
UNIX
PC
Page 16 Splash PCI Series v6.0 Set-Up Manual
2. When you print from a client computer, the Splash printer driver software
creates PostScript code and sends it over the network to the Splash Server.
Large files take longer to transfer—the length of transfer depends on file size
and network traffic. Splash can receive print jobs from multiple network clients
simultaneously.
3. The Splash Server spools (temporarily stores) the intermediate PostScript
files on the hard disk where the Server application is located.
When you print from the Splash Server, the PostScript code is immediately
spooled and queued on the Splash Server hard disk.
4. The Server application uses true Adobe PostScript code to calculate, pixel-by-
pixel, the image that will be generated by the printer. This is called Raster
Image Processing (RIP).
5. If Splash Color Correction is enabled, the Splash Server application corrects
the color of the printed output to match the screen image of the selected
display type or to match the standard process ink colors used by commercial
printing presses. If both RGB and CMYK colors are present in the same
document, Splash color-corrects separately for each color type.
6. The file is sent to the printer/copier, where it is printed.
About The Splash Server Manuals
This manual explains how to set up the Splash Server hardware and software.
Information about how to set up remote clients for printing to Splash is provided in
other on-line manuals, which are pre-loaded on the Splash Server machine. The
Splash on-line manuals are also provided on the Splash software CD-ROM. See
“Splash Server On-Line Manuals” on page 31 for a list of on-line manuals.
To use the Splash Server, you should be familiar with Macintosh procedures and
conventions, such as how to start an application, how to open and close files, and
how to use the mouse. Refer to your
Macintosh User’s Guide
for information.
In certain geographical areas, such as the Asia/Pacific region, the printer/copier is
sold as the Xerox Acolor printer/copier. In other areas, the printer/copier is sold as
the Xerox MajestiK, Regal, or DocuColor printer/copier. The hardware and soft-
ware described in this manual are compatible with and operate in the same way on
any of these printer/copiers. We refer to the MajestiK, the Regal, the DocuColor,
and the Acolor as “the printer/copier” throughout this manual. For more informa-
tion about the MajestiK, Regal, DocuColor, or Acolor Color Series, refer to the
manuals provided with your printer/copier.
Chapter 1: Setting Up the Splash Server Page 17
Chapter 1
Setting Up the Splash Server
In this chapter:
Connecting the System..................................................................... 17
Splash Key.......................................................................................... 19
Setting Up the Splash Server ...........................................................20
Copier Set-Up Notes.......................................................................... 22
Installing the Splash Client Software............................................... 23
Setting Up TCP/IP and Novell NetWare Client Printing ..................23
Installing the Splash Plug-Ins for Adobe Photoshop.....................23
Splash Server System Performance................................................ 24
Disk Size..........................................................................................24
Memory Size....................................................................................28
Troubleshooting................................................................................. 29
Splash Server On-Line Manuals....................................................... 31
The Splash Server is a fully-equipped server/workstation that is pre-configured
with all needed software. This chapter describes how to connect the specific
hardware pieces included in the package, and how to start the system so that it will
function as a server.
Connecting the System
This section explains how to unpack and connect the Splash Server. If you are
familiar with installing and connecting a Macintosh computer, parts of this section
will serve as a review. However, you should read this entire section carefully to be
sure that your Splash Server will function correctly on the network.
Page 18 Splash PCI Series v6.0 Set-Up Manual
To unpack and connect the Splash Server:
1.
Make sure that the Xerox MajestiK, Regal, DocuColor, or Acolor copier is
properly installed and connected, and that it is loaded with Letter or A4 size
paper. Use the MajestiK, Regal, DocuColor, or Acolor as a photocopier to
make sure that it is turned on and functioning correctly.
2.
The packing box for the Splash Server contains several component boxes.
Remove each of these boxes from the packing box. The boxes for the CPU and
the display are heavy; you may want assistance in lifting and positioning these
boxes on your work surface.
3.
Compare the items listed on the Splash Server Packing List with the actual
contents of the Splash package. If any items are missing, contact your local
sales representative before you proceed.
4.
Unpack the display, keyboard, and Splash Server CPU.
5.
Place the Splash Server CPU and the color display in the work area where
they will be used. You should position these components close to the
Xerox copier. The cable that connects the Splash Server CPU to the
copier is 6 meters (about 18 feet) in length.
6.
Remove the keyboard from its box, and connect the ADB cable to the port on
the keyboard.
7.
Connect the large end of the Splash Key to the ADB keyboard cable.
8.
Connect the small end of the Splash Key to the ADB port on the back
of the Splash Server CPU.
9.
The mouse is included in the box with the Splash Server CPU.
Remove the mouse, and connect it to the keyboard.
10.
Connect one end of the GFI power cord to the socket on the back of the Splash
Server CPU, and the other end to the Macintosh power cable provided with the
Power Macintosh.
Splash Key
Chapter 1: Setting Up the Splash Server Page 19
11. Connect the other end of the Macintosh power cable to a live, grounded AC
outlet.
12. Connect the color display to the Splash Server using the provided
cable. Tighten the thumbscrews to secure the cable.
13. Unpack the Splash Accessories Kit. Connect one end of the Splash cable to the
connector on the Splash PCI board on the back of the Splash Server computer,
and the other end to the Xerox copier. Tighten the thumbscrews on the cable at
the printer/copier to secure the connection.
14. Connect the Splash Server CPU to your computer network.
You have completed connecting the Splash Server equipment.
Splash Key
The Splash Key is a hardware device that connects to the ADB port on your
computer, between the computer and the keyboard ADB cable. The Splash Key
prevents unauthorized use of the Splash Server and also provides maximum
security by locking the Splash Server application when the key is removed.
The Splash Server application runs normally when the Splash Key is connected to
the keyboard cable. To prevent unauthorized printing, shut down the Splash Server
CPU and remove the Splash Key from the keyboard cable. This locks the Splash
Server application until the Splash Key is replaced on the keyboard cable.
IMPORTANT: Shut down the Splash Server CPU before removing or replacing the
Splash Key.
Page 20 Splash PCI Series v6.0 Set-Up Manual
Setting Up the Splash Server
When you start up the Splash Server computer, the Splash Server application starts
automatically. You are asked to provide the product registration number for the
Splash Server software when you start the Splash Server for the first time.
To start the Splash Server for the first time:
1. Turn on the power for the color display.
2. Start up the Splash Server. (Press the Power key on the keyboard.)
3. The Splash Server takes a moment to start, and load its pre-installed software.
The Splash Server application starts automatically, and a product registration
dialog box appears.
4. Enter your name, the name of your company, and the serial number for the
Splash Server software. The serial number is located on the back side of the
Splash CD-ROM jewel case. Look for a number with the “SMT” prefix. The
serial number field only accepts numeric values
Note: The Splash Server software is pre-installed on the Splash Server. It is
not necessary to insert the CD-ROM in the computer.
5. When you have entered the software registration information, click OK.
The Splash Server application initializes the PostScript interpreter used for
printing. This process may take more than a minute.
When initialization is complete, Splash prints a start-up page to the printer/
copier. The appearance of the start-up page confirms that the Splash Server is
functioning correctly, and is properly connected to the printer/copier.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73

Xerox MajestiK 5760 Installation guide

Category
Multifunctionals
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI