MD Sports TSL100_048M Operating instructions

Brand: MD Sports

Model: TSL100_048M

Type: Operating instructions

MODEL: TSL100_048M

Menards

ASSEMBLY INSTRUCTIONS

SAFETY INSTRUCTION

WARNING

Product must be assembled by adults before use.

Do not over-inflate.

Not to be used as a floating device.

This product is for youth use only, it is not intended for adult training.

Child Care

Not for use by children without adult supervision.

To reduce the risk of suffocation, drowning or serious personal injury,

- Always stay within reach of children while playing.

- Keep the product away from small children when it is not inflated.

Product Protection

Play only in open areas away from sharp objects.

Avoid contacting the inflatable bag with sharp objects or hot surfaces which could cause injury to your hands.

Remove sharp objects from your body which could damage the product, such as rings, watches etc.

Make sure that there are no sharp objects on your shoes which could damage the product.

www.themdsports.com

TSL100_048M

(Continued on the next page.)

1 - This product is intended for INDOOR use only.

2 - Please do not sit, climb or lean on the product.

3 - This is not a child's toy, adult supervision is required for children playing this game.

WARNING:

Adult Assembly Required.

WARNING:

CHOKING HAZARD 

WARNING:











WARNING:











ASSEMBLY TIPS

IMPORTANT NOTICE!

www.themdsports.com

TSL100_048M

(Continued on the next page.)

1 - Please read the instructions carefully, and follow all assembly, operation, and safety instructions properly in order to avoid

damage or injury. For the assembly, at least two adults are required.

2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each

assembly step.

No Children in

Assembly Area

Keep away from pets Do not use or keep product

outdoors. For indoor use only.

No wet/humid conditions.

2 3 41

6 7 85

Straight Connector

2 Way Connector

Electronic Scorer

Infrared Blaster

“L” Connector

14-3/4” Tube - 2

21-1/2” Tube - 3

23-3/4” Tube - 4

21-1/8” Tube - 1

Inflatable bag with sensors

www.themdsports.com

TSL100_048M

(Continued on the next page.)

TSL100_048M PARTS LIST

ASSEMBLY INSTRUCTIONS:

1. Find a clean, level place to begin the assembly of your product.

2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list pages.

Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.

FOR FIG. 1 FOR FIG. 2 FOR FIG. 2, 3

FOR FIG. 1, 4

FOR FIG. 1 FOR FIG. 2, 3, 4

FOR FIG. 1

FOR FIG. 2

FOR FIG. 1, 4

Target Sensor

Wire

www.themdsports.com

TSL100_048M

(Continued on the next page.)

X 2

X 1

X 2

FIG. 1

FIG. 2

FIG. 2 Assembly

www.themdsports.com

TSL100_048M

(Continued on the next page.)

X 2

FIG. 3

FIG. 4

X 2

X 1

www.themdsports.com

TSL100_048M

(Continued on the next page.)

Inflation

DO NOT OVER INFLATE

Cover Nozzles

FIG. 5

GLOW IN THE DARK

Glow for up to minutes of time in the night,

recharge by exposing to artificial or natural light.

Note: Inflate the Inflatable bag

with sensors (#5) using an

air pump (not included).

WARNING:

1) Requires 3 pcs “AAA” Batteries (Not included).

2) Do not mix old and new batteries.

3) Do not mix alkaline, standard (carbon zinc), or

rechargeable (nickel-cadmium) batteries.

WARNING:

1) Requires 2 pcs “AAA” Batteries (Not included).

2) Do not mix old and new batteries.

3) Do not mix alkaline, standard (carbon zinc), or

rechargeable (nickel-cadmium) batteries.

NOTE: Batteries must be inserted into

the gun before the game can commence.

Battery Installation

Battery Box: Unscrew the bolt using a screwdriver and open the battery box. Insert 3 “AAA” and 2 “AAA” batteries ( not included) in

the order of polarity as shown on the inside cover. Then close the cover using a screwdriver. Turn the power ON using the ON/OFF

switch.

Reminding:

a. Batteries must be installed according to the correct polarization (+ and -) required.

b. Please clean the battery contacts and also those of the device prior to battery installation.

c. If the game will not be used for a long period of time, we recommend that the batteries should be removed.

How to play

When the game is plugged in, it automatically sets the game for two players for time duration of 1 minute.

(To switch off the product, press the ON/OFF button for two seconds)

A. When the game is switched on. The electronic scorer will display 2P, You can now choose the button of one or two players. If you press the

button for 2P, the timer will start to count down 5. 4. 3. 2. 1. After the countdown, see the time display of 1 minute.

B. After the count down, you will see one of the LED lights up for 4 seconds to shoot. (There will be 3 sets of LED lights lit up randomly for the

game.) Once you shot on target, you will hear the scoring sound the scorer will display 01. If you succeed on shooting the next target within

the next 4 seconds, you will hear the scoring sound and the scorer will display 02. After the display of your score, the scorer will switch back to

the countdown. If one did not score, the time display will not be switched to score.

C. When the time is up for the first player. The electronic scorer will start to count down 5. 4. 3. 2. 1, and display a countdown of 1 minute. The

second player starts to play the game of 1 minute. After the count down, you will see one of the LED lights up for 4 seconds to shoot. (There

will be 3 sets of LED lights lit up randomly for the game.) Once you shot on target, you will hear the scoring sound the scorer will display 01.

If you succeed on shooting the next target within the next 4 seconds, you will hear the scoring sound and the scorer will display 02. After the

display of your score, the scorer will switch back to the countdown. If one did not score, the time display will not be switched to score.

D. Before the time is up, you will hear the sound effects for 5. 4. 3. 2. 1, and GAME OVER! And TRY AGAIN! You can only start a new game after

the sound effects. The scores will flash for the winning player.

E. When one chooses 1P, press the ON/OFF button to start. After hearing the countdown 5. 4. 3. 2. 1, the game of 1 minute begins.

F. You will see one of the LED lights up for 4 seconds to shoot. (There will be 3 sets of LED lights lit up randomly for the game.) Once you shot

on target, you will hear the scoring sound the scorer will display 01. If you succeed on shooting the next target within the next 4 seconds, you

will hear the scoring sound and the scorer will display 02. After the display of your score for 2 seconds, the scorer will switch back to the

countdown. If one did not score, the time display will not be switched to score. Before the time is up, you will hear the sound effects for 5. 4. 3.

2. 1, and GAME OVER! And TRY AGAIN! You can only start a new game after the sound effects. The scores will flash.

G. The game will be on SLEEP MODE if there aren’t any operations after 5 minutes.

10 10

www.themdsports.com

TSL100_048M

(Continued on the next page.)

ELECTRONIC SCORER OPERATION:

www.themdsports.com

TSL100_048M

(The last page.)

HOW TO OPERATE THE BLASTER

Pull the pulling lever

Trigger and fire

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including

interference that may cause undesired operation.

YOU ARE NOW READY TO PLAY!

MD Sports TSL100_048M Operating instructions

MD Sports TSL100_048M Operating instructions

MD Sports TSL100_048M Operating instructions

Related papers

Other documents