Southbend SX-34GC is a two-compartment gas convection steamer that can accommodate 1-7 pans. It features two gas-fired stainless steel generators operating at 0 psi (0 kPa) and rated at 45,000 BTU each. The steamer has a satin finish stainless steel #304 construction and a one-piece all-welded #316 stainless steel cooking chamber with coved corners. The heavy-duty door has an inner liner of stainless steel with a full perimeter gasket seal, an outer liner of one-piece all-welded stainless steel, and a positive lock and seal mechanism with spring release.
Southbend SX-34GC is a two-compartment gas convection steamer that can accommodate 1-7 pans. It features two gas-fired stainless steel generators operating at 0 psi (0 kPa) and rated at 45,000 BTU each. The steamer has a satin finish stainless steel #304 construction and a one-piece all-welded #316 stainless steel cooking chamber with coved corners. The heavy-duty door has an inner liner of stainless steel with a full perimeter gasket seal, an outer liner of one-piece all-welded stainless steel, and a positive lock and seal mechanism with spring release.
Southbend SX-34GC is a two-compartment gas convection steamer that can accommodate 1-7 pans. It features two gas-fired stainless steel generators operating at 0 psi (0 kPa) and rated at 45,000 BTU each. The steamer has a satin finish stainless steel #304 construction and a one-piece all-welded #316 stainless steel cooking chamber with coved corners. The heavy-duty door has an inner liner of stainless steel with a full perimeter gasket seal, an outer liner of one-piece all-welded stainless steel, and a positive lock and seal mechanism with spring release.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI