Toshiba TLPC001 Owner's manual

English Deutsch Español Français 日本語简体中文繁體中文

한국어

TOSHIBA

OWNER’S MANUAL

DOCUMENT CAMERA

For TOSHIBA Data Projector

TLPC001

For other languages, please refer to the owner’s manual CD-ROM version.

English Deutsch Español Français 日本語简体中文繁體中文

한국어

CONTENTS

SAFETY PRECAUTIONS ..............................................................1

IMPORTANT SAFETY INSTRUCTIONS.......................................2

IMPORTANT PRECAUTIONS .......................................................6

EXEMPTION CLAUSES ................................................................7

OTHER CAUTIONS AND INFORMATIONS .................................7

REMOTE CONTROL BATTERY....................................................8

IMPORTANT NOTICE....................................................................8

Unpacking .................................................................................... 9

TLPC001 parts ........................................................................... 10

Control panel and remote control............................................... 11

Zoom operation ...................................................................... 12

LED indicator.............................................................................. 12

Rear panel.................................................................................. 13

Connection ................................................................................. 14

Important ............................................................................... 14

Connecting a Toshiba projector ............................................. 14

Connecting a computer .......................................................... 14

Connecting the power adapter ............................................... 15

Installing the LED light hood................................................... 15

Adjusting the TLPC001 .............................................................. 16

Camera Head ......................................................................... 16

Gooseneck and Arm............................................................... 16

Focus Wheel .......................................................................... 17

LED Light................................................................................ 17

Replacing the remote control battery ......................................... 18

Lithium battery........................................................................ 18

Using the remote control ............................................................ 19

Remote control ....................................................................... 19

Basic operations......................................................................... 20

1. Connect the Toshiba projector ....................................... 20

2. Connect a computer. ...................................................... 20

3. Turn on the power. ......................................................... 20

4. Adjust the camera........................................................... 20

5. Adjust the focus.............................................................. 21

6. Fine tune the image........................................................ 21

7. Switching the video source............................................. 21

Technical Specifications ............................................................. 22

1

English Deutsch Español Français 日本語简体中文繁體中文

한국어

SAFETY

PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE

ENCLOSURE. DO NOT OPEN THE CABINET. REFER

SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with

accessories sold with this product, will expose you to lead, a

chemical known to the State of California to cause birth defects or

other reproductive harm. Wash hands after handling.

MODEL NAME: TLPC001

FCC Radio Frequency Interference Statement

Note: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his or

her own expense.

WARNING: Changes or modifications made to this equipment, not expressly

approved by Toshiba, or parties authorized by Toshiba, could void

the user’s authority to operate the equipment.

Notice: This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

WARNING: This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be

required to take adequate measures.

USA onl

y

Canada only

USA onl

y

USA onl

y

2

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND

THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR

FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety.

Improper use can result in electric shock or fire hazard. The safeguards

incorporated in this unit will protect you if you observe the following procedures

for installation, use and servicing. This unit is fully transistorized and does not

contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read

the owner’s manual carefully, and

follow all the operating and other

instructions.

2. Power Sources

This product should be operated

only from the type of power source

indicated on the marking label. If

you are not sure of the type of

power supply to your home,

consult your product dealer or local

power company. For products

intended to operate from battery

power, or other sources, refer to

the operating instructions

3. Source of Light

DO NOT look directly into the light

while the LED light is on. The

strong light may cause damage to

your eyes or sight.

4. Ventilation

Openings in the cabinet are

provided for ventilation and to

ensure reliable operation of the

product and to protect it from

overheating, and these openings

must not be blocked or covered.

The openings should never be

blocked by placing the product on

a bed, sofa, rug or other similar

surface. This product should not be

placed in a built-in installation such

as a bookcase or rack unless

proper ventilation is provided or the

manufacturer’s instructions have

been adhered to.

3

English Deutsch Español Français 日本語简体中文繁體中文

한국어

5. Heat

The product should be situated

away from heat sources such as

radiators, heat registers, stoves, or

other products (including amplifiers)

that produce heat

6. Water and Moisture

Do not use this product near water.

For example: near a bath tub,

wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a

swimming pool and the like.

7. Cleaning

Unplug this product from the wall

outlet before cleaning. DO NOT

use liquid cleaners or aerosol

cleaners. Use a soft cloth for

cleaning.

8. Power-Cord Protection

Power-supply cords should be

routed so that they are not likely be

walked on or pinched by items

placed upon or against them,

paying particular attention to cords

at plugs, convenience receptacles,

and the point where they exit from

the product.

9. Overloading

Do not overload wall outlets;

extension cords, or integral

convenience receptacles as this

can result in a risk of fire or electric

shock.

10. Lightning storms

For added protection for this

product during storm, or when it is

left unattended and unused for

long periods of time, unplug it from

the wall outlet. This will prevent

damage to the product due to

lightning and power-line surges.

However, while it is thundering or

lightning, do not touch the

apparatus and any connected

cable and/or equipment. This will

prevent you from receiving the

electric shock by an electric surge.

4

11. Object and Liquid Entry

Never push objects of any kind into

this product through openings as

they may touch dangerous voltage

points or short-out parts that could

result in a fire or electric shock.

Never spill liquid of any kind on the

product.

12. Do not place the product

vertically

Do not use the product in the

upright position to project the

pictures at the ceiling, or any other

vertical positions. It may fall down

and dangerous.

13. Stack Inhibited

Do not stack other equipment on

this product or do not place this

product on the other equipment.

Top and bottom plates of this

product develop heat and may give

some undesirable damage to other

unit.

14. Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

15. Accessories

Do not place this product on an

unstable cart, stand, tripod,

bracket, or table. The product

may fall, causing serious injury to

a child or adult, and serious

damage to the product. A product

and cart combination should be

moved with care. Quick stops,

excessive force, and uneven

surfaces may cause the product

and cart combination to overturn.

S3125A

16. Damage Requiring Service

Unplug this product from the wall

outlet and refer servicing to

qualified service personnel under

the following conditions:

a) When the power-supply cord or

plug is damaged.

b) If liquid has been spilled, or

objects have fallen into the

product.

c) If the product has been

exposed to rain or water.

d) If the product does not operate

normally by following the

operating instructions. Adjust

only those controls that are

covered by the operating

5

English Deutsch Español Français 日本語简体中文繁體中文

한국어

instructions as an improper

adjustment of other controls

may result in damage and will

often require extensive work by

a qualified technician to restore

the product to its normal

operation.

e) If the product has been

dropped or damaged in any

way

f) When the product exhibits a

distinct change in performance

this indicates a need for service.

17. If glass components, like lens,

break contact your dealer for

repair service.

This product incorporates glass

components, like lens. If such parts

should break, please handle with

care to avoid injury and contact

your dealer for repair service. The

broken pieces of glass may cause

to injury.

18. Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other

hazards. Refer all servicing to

qualified service personnel.

19. Replacement Parts

When replacement parts are

required, be sure the service

technician has used replacement

parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may

result in fire, electric shock, or

other hazards.

20. Safety Check

Upon completion of any service or

repairs to this product, ask the

service technician to perform

safety checks to determine that the

product is in proper operating

condition.

21. Do not leave thermal-paper

documents or easily deformed

items on top of the unit or near

the air exhaust for long periods

of time.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

22. Do not use the product in a

closed installation state.

Do not place the product in a box

or in any other closed installation

state. Otherwise it may overheat.

This could result in a risk of fire.

6

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever

have to ship your document camera. For maximum protection, repack the set as

it was originally packed at the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm

location. When the unit is exposed to such a change in temperature, moisture

may condense on the crucial internal parts. To prevent the unit from possible

damage, DO NOT use the unit for at least 2 hours when there is an extreme or

sudden change in temperature.

Place and Manner of Installation

• DO NOT place in hot locations, such as near heating equipment. Doing so

could cause malfunction, and shorten the life of the document camera.

• Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts,

shortening their lives, and darkening the screen.

• Using this instrument near a TV or radio may cause interference to the

images or audio sound. If this happens, move it away from the TV or radio.

• Moving the document camera from a low-temperature room to a high-

temperature room may cause condensation on the lens or internal parts in

the instrument. If you continue to use it in that situation, the malfunction may

result. Ensure to wait until the condensation naturally disappears.

Avoid Volatile Liquid

DO NOT use volatile liquids, such as an insect spray, near the unit. DO NOT

leave rubber or plastic products touching the unit for a long time. They will leave

marks on the finish. If cleaning with a chemically saturated cloth, be sure to

follow the product's precautions.

In the spaces provided below, record the Model and Serial No. located at the

bottom of your document camera.

Model No. Serial No.

3

Retain this information for future reference.

7

English Deutsch Español Français 日本語简体中文繁體中文

한국어

EXEMPTION CLAUSES

• Toshiba Corporation bears no responsibility in the case of damages arising

from natural disaster such as earthquakes, lightning, etc., fire not liable to

Toshiba Corporation, operation, theft or mischief by third parties, other

accidents, or use under abnormal conditions including erroneous or improper

operation and other problems.

• Toshiba Corporation bears no responsibility for incidental damages (lost profit,

work interruption, corruption or loss of the memory contents, etc.) arising

from the use of or the inability to use this unit.

• Toshiba Corporation accepts no liability whatsoever for any damages arising

from not having followed the descriptions in this Instruction Manual.

• Toshiba Corporation accepts no liability whatsoever for any damages arising

from malfunctions arising from combination with equipment or software that is

not related to Toshiba Corporation.

OTHER CAUTIONS AND INFORMATIONS

Copyrights

Showing or transmitting commercial imaging software or broadcast or cable-

broad casting programs with the purpose of other than the personal and private

viewing, including modifying images using the freeze, resize, PIP, or SPLIT

screen functions, or displaying with the varying aspect ratio of the images, could

violate the direct or indirect copyrights of the imaging software or broadcast

program, etc., if done without first consulting with the copyright holder. For this

reason, please take appropriate measures before performing one of the actions

listed above, including obtaining a license from the copyright holder.

Trademarks

• VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of

International Business Machines Corporation.

• Digital Light Processing, Digital Micromirror Device and DMD are trademarks

of Texas Instruments.

• Macintosh is a registered trademark of Apple Computer, Inc.

• Windows is a registered trademark of Microsoft Corporation in the U.S. and

other countries.

• Adobe is a registered trademark and Acrobat Reader is a trademark of

Adobe Systems Incorporated.

8

REMOTE CONTROL BATTERY

Caution

• Never throw battery into a fire.

Notes

• Be sure to use lithium CR2025 3V battery.

• Dispose the battery in a designated disposal area.

• Attention should be drawn to the environmental aspects of battery disposal.

• If the remote control does not operate correctly, or if the operating range

becomes reduced, replace a new battery.

IMPORTANT NOTICE

1. TLPC001 is designed for Toshiba’s projectors or monitors only. This is not

intended to work with other brands. Otherwise, the unit may not be able to

display the image on the screen.

2. Under a certain circumstance CMOS sensor might display some bad pixel

(tiny spot). This is normal for this is the limitation of the sensor.

3. Upon the power source is connected, it takes 15~20 seconds to warm-up.

4. The picture noise may be conspicuous when you use the projector with

natural color enhancer (NCE). In such case, we recommend you to set the

picture mode of the projector into “True color”.

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be

treated as household waste. By ensuring this product is

disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of

this product, please contact your local city office, your

household waste disposal service or the shop where you

purchased the product.

9

English Deutsch Español Français 日本語简体中文繁體中文

한국어

Unpacking

Check the supplied items as listed below. If any item is missing, contact

the store from where you purchased TLPC001.

O

W

N

E

R

’

S

M

A

N

U

A

L

D

O

C

U

M

E

N

T

C

A

M

E

R

A

F

o

r

T

O

S

H

I

B

A

D

a

t

a

P

r

o

j

e

c

t

o

r

T

L

P

C

0

1

F

o

r

o

t

h

e

r

l

a

n

g

u

a

g

e

s

,

p

l

e

a

s

e

r

e

f

e

r

t

o

t

h

e

o

w

n

e

r

’

s

m

a

n

u

a

l

C

D

-

R

O

M

v

e

r

s

i

o

n

.

E

n

g

l

i

s

h

D

e

u

t

s

c

h

E

s

p

a

ñ

o

l

F

r

a

n

ç

a

i

s

繁

體

中

文

簡

体

中

文

日

本

語

(4) (5)

(1) (6)

P

H

I

N

O

P

H

S

-

2

0

5

A

P

H

I

N

O

(2) (7) (8)

(3) (9)

(1) TLPC001

(2) Remote control (battery included)

(3) Multi-lang Owner’s Manual CD (Acrobat Reader executable)

(4) Owner’s Manual

(5) LED light hood

(6) Power adapter

(7) RGB cable (3m)

(8) Power cord

(9) Carrying bag

Note:

The shape and the number of supplied power cords may vary depending

on the product destination.

10

TLPC001 parts

(1)

(6)

(7)

(5)

(8)

(3)

(4)

(2)

(9)

Name Function

(1) Focus wheel : Adjust the lens to get a clear image

(2) LED light switch : Turn on/off the LED light

(3) Built-in LED light : Provide direct illumination

(4) Lens : Capture the image

(5) Gooseneck : Position the camera head in any angle

(6) Control panel : Operate the document camera

(7) IR sensor : Sense commands from the remote control

(8) Rear Panel : Connect external devices

(9) LED light hood : Direct the light source

11

English Deutsch Español Français 日本語简体中文繁體中文

한국어

Control panel and remote control

(1)

(3)

(4) (2)

(1)

(6)

(5)

(3)

(4)

(2)

Control Panel

Remote control

Name Function

Control panel

(1) ON/STANDBY : Turn the unit on/standby

(2) INPUT

: Switch to output signal from TLPC001

document camera or computer in

(3) GAIN : Adjust the gain value of the image (±16)

(4) ▲, ►, ▼, ◄ : Pan the magnified image in camera mode

(5) WHITE

BALANCE

: Lock/unlock auto white balance

(6) ZOOM

: Zoom in and zoom out the image in

camera mode

Remote control

(1) INPUT

: Switch to output signal from TLPC001

document camera or computer in

(2) GAIN : Adjust the gain value of the image (±16)

(3) ▲, ►, ▼, ◄ : Pan the magnified image in camera mode

(4) ZOOM

: Zoom in and zoom out the image in

camera mode

12

♦ Zoom operation

TLPC001 uses 3Mega CMOS camera with the maximum pixel of H2048

x V1536 (QXGA).

• [Sensor zoom]

Sensor zoom outputs the image up to H1024-pixel x V 768-pixel

which only uses a portion of the signal. The image is still in its original

pixel data and does not affect the image quality.

• [Digital zoom]

Digital zoom interpolates the pixels to enlarge the image. High

expansion makes the image blurry.

• [Zoom operation]

Zooming process changes automatically as follows:

100% Normal

110%-190% Digital zoom

200% Sensor zoom

210%-400% Sensor zoom (200%) + digital zoom

• When the “zoom +” key is pressed for about 3 sec, it automatically

zoom in the image and stops up 200%. To continue magnification up

to 400%, release and press “zoom +” key again.

• When switching from digital to sensor zoom (between 190% and

200%), the image would normally disappear for a moment to change

the processing mode.

LED indicator

(1) (3)

(2)

Name Function

(1) CAMERA : Light up in camera mode

(2) ON/ STANDBY - Blink when the unit is initializing

- Turn orange when the unit is in standby mode

- Turn green when the unit is on and ready to use

(3) LOCK : Light up when the AWB feature is locked

13

English Deutsch Español Français 日本語简体中文繁體中文

한국어

Rear panel

(1) (5) (3) (4) (2)

Name Function

(1) Security Lock

: Attach a safety cable or any other antitheft

device

(2) DC IN 15V : Connect the power adapter into this port

(3) Flicker Switch

: Set the suitable flicker setting to remove

wavering line (50/60Hz)

(4) Computer In

: Input analog RGB signal from a computer

or other source

(5) Output

: Output analog RGB signal from TLPC001

document camera or Computer in terminal

to Toshiba projector

14

Connection

♦ Important

• Read the owner’s manual of the device you are connecting to the

TLPC001 document camera.

• Turn off the power of both devices before making the connection.

• TLPC001 is designed for Toshiba’s projectors or monitors only. This

is not intended to work with other brands. Otherwise, the unit may

not be able to display the image on the screen.

• Make sure TLPC001 is placed on a flat stable surface.

Connecting a Toshiba projector

Please refer to the Owner’s manual of Toshiba projector and check the

location of the RGB input terminal of the unit.

To RGB Input

Connecting a computer

• Connect TLPC001 to a PC, Macintosh, or other device with analog

RGB source such as laptop.

• Turn on the computer then press INPUT button on TLPC001 control

panel or remote control to display the video signal from the computer.

VGA Cable

(not supplied)

Plug to Display Card

IBM Compatible PC

Macintosh

Computer

Adapter

(optional)

OR

15

English Deutsch Español Français 日本語简体中文繁體中文

한국어

Connecting the power adapter

Plug the power adapter to a standard 100~240V AC power source.

PHINO

Wall

Out let

Installing the LED light hood

Attach the LED light hood behind the focus wheel.

16

Adjusting the TLPC001

TLPC001 design allows you to adjust the angle in any position.

Camera Head

You can adjust the camera angle 135 degrees vertically up to down and

twist the camera head 270 degrees horizontally.

90 degrees

45 degrees

Gooseneck and Arm

You can bend the gooseneck and adjust the arm 135 degrees forward

and backward.

90 degrees

45 degrees

Note:

DO NOT bend the gooseneck to an extreme angle.

17

English Deutsch Español Français 日本語简体中文繁體中文

한국어

Focus Wheel

You can adjust the focus wheel to obtain a clear image.

Adjust here

LED Light

Adjust the height of the camera head until an adequate lighting is

obtained. The distance of the camera head to provide an adequate

lighting in shooting an A4 (21 cm x 29.7 cm) sized paper is 43 cm.

43 cm

18

Replacing the remote control battery

M

a

d

e

i

n

T

a

i

w

a

n

O

p

e

n

C

R

2

0

2

5

3

V

+

C

R

2

0

2

5

+

T

O

S

H

I

B

A

L

I

T

H

I

U

M

B

A

T

E

R

Y

C

R

2

0

2

5

3

V

J

A

P

A

N

(1)

(3)

(4)

(2)

(1) Press the latch to unlock

(2) Pull the battery holder.

(3) Place the lithium CR2025 3V battery into the holder,

and make sure the positive sign is facing up.

(4) Push the battery holder back.

♦ Lithium battery

• Before using the battery, be sure to observe the Safety

Precautions described in previous pages.

• Remove the battery from remote control when not in use for

extended periods.

• If the remote control stops working, or if its range decreases,

replace the battery with a new one.

19

English Deutsch Español Français 日本語简体中文繁體中文

한국어

Using the remote control

Point toward the IR sensor located at the front panel of TLPC001 to

operate the unit with the remote. The approximate distance is about 5m.

♦ Remote control

• The remote control may fail to operate if the IR sensor is

exposed to bright sunlight or fluorescent lighting.

• Do not drop or bang the remote control.

• Do not leave in hot or humid locations.

• Do not get wet or place on top of wet objects.

• Do not take apart.

• In rare cases, ambient conditions could impede the operation of

the remote control. If this happens, point the remote control at

the main unit again, and repeat the operation.

20

Basic operations

1. Connect the Toshiba projector

Connect the TLPC001 document camera to Toshiba projector by

following the instruction in “Connecting a Toshiba projector”.

2. Connect a computer.

Connect the TLPC001 document camera to a computer by

following the instruction in “Connecting a computer”.

3. Turn on the power.

The sequence at the time when the power is supplied

(1) Upon connecting the power source, the unit

automatically warms up for about 15~20 sec. During

this time, the ON/STANDBY LED is blinking. Only

LED lighting switch and flicker switcher (50/60Hz)

can be operated.

(2) When the ON/STANDBY LED turns steady orange,

the TLPC001 document camera is now in standby

mode. You may now press the ON/STANDBY

button to start the operation.

(3) When the ON/STANDBY LED turns steady green,

you may now see the signal from the TLPC001

document camera on the screen. The CAMERA

LED is now on. To view the signal from the

computer, press INPUT button.

(4) When the ON/STANDBY button is pressed for the

second time, TLPC001 document camera switches

to standby mode and the ON/STANDBY LED turns

steady orange. You will no longer see the TLPC001

document camera signal on the screen.

4. Adjust the camera

Turn on the LED light and then position the TLPC001 camera

head by adjusting the gooseneck and arm in any angle.

21

English Deutsch Español Français 日本語简体中文繁體中文

한국어

5. Adjust the focus

Rotate the focus wheel on the TLPC001 camera head to get a

clear image.

6. Fine tune the image

(1) Switch the suitable flicker setting at rear panel of TLPC001

document camera.

(2) Lock the white balance. Although the camera is constantly

adjusting the color balance of the captured image, the color

balance may be disrupted, depending on the color layout of

the document. If this happens, the white balance can be

locked using the procedures below.

• Place a piece of white paper under the camera

and adjust the paper till it fills the whole screen.

• Press WHITE BALANCE button to lock and keep

the white balance setting.

7. Switching the video source

Each time the INPUT button is pressed, it toggles the video source

between camera and computer mode.

Note :

• Do not look directly at the LED light while the light is on. The

strong light may cause damage to your eyes or sight.

• Make sure the TLPC001 document camera is placed on a flat

stable surface while setting up or pressing any buttons.

22

Technical Specifications

Image

Pick-up Sensor 1/2” 3M pixel Color CMOS Sensor

Effective Pixels QXGA (2048 H x 1536 V)

Display Resolution XGA (1024 H x 768 V)

Optics

Lens Fixed Focal Lens

Focal Length fl=9.6mm

Distortion <=2%

Iris F=3.0,

Shooting Area A4 Size at 432mm height

I/O port

CMOS Camera Signal

Output

D-sub 15pin

VGA)

Signal from Computer in port

Computer In D-sub 15pin (VGA)

Output Video Format XGA at 75Hz ( Camera Mode)

Video Output Level RGB: 0.7 V(p-p)/ 75 ohm

Lighting

Light type Built-in LED light

Electronic Functions

Gain ±16; 33 levels

Sensor mapping 2x

Zoom

4x Zoom-in

(10% at a time)

Digital Zoom 2x

White Balance Auto/Lock

Exposure Manual

Flicker Control 50/60 Hz switch

Power (6.5mm Power Jack)

Power Source AC 100V~240V, 50/60 Hz

Power Supply 15V DC Power Adapter

Consumption 5.5 Watts (LED light off); 7Watts (LED light on)

Temperature

Operating 0°C to 40°C (32°F to 104°F)

Storage -30°C to 60°C (-22°F to 140°F)

Dimension

Folded 340mm x 270mm x 80mm

Main Unit : 1.9 kg (about 4.2 lb)

Weight

Remote Control : 100g (with batteries)

Page is loading ...

Toshiba TLPC001 Owner's manual

This manual is also suitable for

Toshiba TLPC001 Owner's manual

in other languages

Related papers

Other documents