SPECIFICATION

MODEL LPV-20-5 LPV-20-12 LPV-20-15 LPV-20-24

DCVOLTAGE

RATEDCURRENT

CURRENTRANGE

RATEDPOWER

OUTPUT

LINEREGULATION

LOADREGULATION

INPUT

INRUSHCURRENT(max.)

LEAKAGECURRENT

SAFETY STANDARDS

HARMONICCURRENT

EMSIMMUNITY

WORKINGTEMP.

WORKINGHUMIDITY

STORAGETEMP.,HUMIDITY

TEMP.COEFFICIENT

OVERVOLTAGE

5V 12V 15V 24V

3A 1.67A 1.33A 0.84A

0~3A 0~1.67A 0~1.33A 0~0.84A

15W 20W 20W 20.2W

80mVp-p 120mVp-p 120mVp-p 150mVp-p

5.0%

1.0%

2.0%

500ms,20ms/230VAC5 atfullload00ms,20ms/115VAC

90~264VAC

110~150%ratedoutputpower

Protectiontype:Hiccupmode,recoversautomaticallyafterfaultconditionisremoved

CompliancetoEN55022(CISPR22)ClassB

Complianceto EN61000-3-2,-3

CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,lightindustrylevel,criteria A

-30~+70 (Refertooutputloadderatingcurve)

20~90%RH non-condensing

-40~+80 ,10~95%RH

0.03%/ (0~50 )

10~500Hz,2G10min./1cycle,periodfor 60min.eachalongX, Y,Zaxes

4. Derating may be needed under low input voltage. Please check the derating curve for more details.

5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

0.22Kg;72pcs/16.8Kg/0.75CUFT

Protectiontype: Shutoffo/pvoltage,clampingbyzenerdiode

20WSingleOutputSwitchingPowerSupply

RIPPLE&NOISE(max.) Note.2

VOLTAGETOLERANCE Note.3

ENVIRONMENT

EMICONDUCTION&RADIATION

SAFETY &

EMC

PROTECTION

20WSingleOutputSwitchingPowerSupply