Supermicro SuperServe 1019D-FHN13TP User manual

USER’S MANUAL

Revision 1.0a

SUpERSERvER

®

1019D-FHN13Tp

1019D-4C-FHN13Tp

1019D-14CN-FHN13Tp

1019D-16C-FHN13Tp

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes

no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update

or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:

For the most up-to-date version of this manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual

at any time and without notice. This product, including software and documentation, is the property of Supermicro and/

or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except

as expressly permitted by the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT

OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER

MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED

OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the

State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution

of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,

may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only

to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

!

The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,

nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical



property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products

for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully

indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and

proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Manual Revision 1.0a

Release Date: July 25, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this



to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

3

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It provides

information for the installation and use of this server. Installation and maintenance should be

performed by experienced technicians only.

Please refer to the 1019D-FHN13TP, 1019D-4C-FHN13TP, 1019D-14CN-FHN13TP, or



memory, processors and operating systems (http://www.supermicro.com).

Notes

For your system to work properly, please follow the links below to download all necessary

drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: https://www.supermicro.com/wftp

• Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]m

This manual may be periodically updated without notice. Please check the Supermicro website

for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing a procedure.

Warning! Indicates important information given to prevent equipment/property damage



4

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

Contents

Chapter 1 Introduction

1.1 Overview ...............................................................................................................................8

1.2 Unpacking the System .......................................................................................................10

1.3 System Features ................................................................................................................11

1.4 Chassis Features ...............................................................................................................13

Power Button/LED .............................................................................................................13

Front Features ...................................................................................................................14

Chassis Rear .....................................................................................................................15

1.5 Motherboard Layout ...........................................................................................................16

Quick Reference Table ......................................................................................................17

Chapter 2 Server Installation

2.1 Overview .............................................................................................................................20

2.2 Preparing for Setup ............................................................................................................20

Choosing a Setup Location ...............................................................................................20

Rack Precautions ..............................................................................................................20

Server Precautions ............................................................................................................21

Rack Mounting Considerations .........................................................................................21

Ambient Operating Temperature ....................................................................................21

 ............................................................................................................................21

Mechanical Loading .......................................................................................................21

Circuit Overloading ........................................................................................................22

Reliable Ground .............................................................................................................22

2.3 Identifying the Sections of the Rack Rails .........................................................................23

Locking Tabs .....................................................................................................................23

Inner Rails .........................................................................................................................24

Outer Rails ........................................................................................................................25

2.4 Installing the Chassis into the Rack ...................................................................................26

Chapter 3 Maintenance and Component Installation

3.1 Removing Power ................................................................................................................27

3.2 Accessing the System ........................................................................................................28

3.3 Motherboard Components ..................................................................................................29

Memory .............................................................................................................................29

5

Preface

Memory Support ............................................................................................................29

 ........................................................................29

DIMM Module Population Sequence ................................................................................30

DIMM Installation ...........................................................................................................31

Severboard Battery ...........................................................................................................32

3.4 Chassis Components .........................................................................................................33

Storage Drives ..................................................................................................................33

Drive Carriers .................................................................................................................33

Installing Hot-Swappable Hard Drives ...........................................................................34

Installing Fixed Internal Drives ......................................................................................36

System Fans .....................................................................................................................37

Installing the Air Shroud ................................................................................................38

Checking the Server Air Flow ........................................................................................39

Overheating ...................................................................................................................39

Power Supply ....................................................................................................................40

PCI Expansion Cards .......................................................................................................41

Chapter 4 Motherboard Connections

4.1 Power Connections ............................................................................................................43

4.2 Headers and Connectors ...................................................................................................44

Front Control Panel ...........................................................................................................50

4.3 Rear I/O Ports ....................................................................................................................53

4.4 Jumpers ..............................................................................................................................56

Explanation of Jumpers .................................................................................................56

4.5 LED Indicators ....................................................................................................................60

Chapter 5 Software

5.1 Driver Installation ................................................................................................................61

5.2 SuperDoctor

®

5 ...................................................................................................................63

5.3 IPMI ....................................................................................................................................63

Chapter 6 UEFI BIOS

6.1 Introduction .........................................................................................................................64

Starting BIOS Setup Utility ................................................................................................64

6.2 Main Setup .........................................................................................................................65

 .........................................................................................67

6.4 Event Logs .........................................................................................................................94

6

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

6.5 IPMI ................................................................................................................................... 96

6.6 Security .............................................................................................................................100

6.7 Boot ..................................................................................................................................103

6.8 Save & Exit .......................................................................................................................105

Appendix A Standardized Warning Statements for AC Systems

Appendix B UEFI BIOS Recovery Instructions

Appendix C System Specications

7

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

8

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

Chapter 1

Introduction

1.1 Overview

This chapter provides a brief outline of the functions and features of the 1019D-FHN13TP,

1019D-4C-FHN13TP, 1019D-14CN-FHN13TP, and 1019D-16C-FHN13TP servers. It is

based on the X11SDW-4C-TP13F, X11SDW-8C-TP13F, X11SDW-14CNT-TP13F, and

X11SDW-16C-TP13F motherboards and the SC513BTS-350WB and SC513BTS-505WB

chassis.

Chassis Model Variation Table

Chassis Model Power Supply Model Power Supply Wattage

SC513BTS-350WB PWS-350-1H 350W

SC513BTS-505WB PWS-505P-1H 500W

SuperServer Model Variation Table

SuperServer Model Motherboard Model Chassis Model Power Supply Model

1019D-FHN13TP X11SDW-8C-TP13F SC513BTS-350WB PWS-350-1H

1019D-4C-FHN13TP X11SDW-4C-TP13F SC513BTS-350WB PWS-350-1H

1019D-14CN-FHN13TP X11SDW-14CNT-TP13F SC513BTS-505WB PWS-505P-1H

1019D-16C-FHN13TP X11SDW-16C-TP13F SC513BTS-505WB PWS-505P-1H

9

Chapter 1: Introduction

Motherboard Model Variation Table

Motherboard

Model Name

X11SDW-4C-TP13F X11SDW-8C-TP13F X11SDW-14CNT-TP13F X11SDW-16C-TP13F

Processor

Name

D-2123IT D-2146NT D-2177NT D-2183IT

Number of

Cores

4 8 14 16

Number of

Threads

8 16 28 32

Processor

Base

Frequency

2.20GHz 2.30GHz 1.90GHz 2.20GHz

Max Turbo

Frequency

3.00GHz 3.00GHz 3.00GHz 3.00GHz

SoC Max TDP

60W 80W 105W 100W

Number of

Memory

Channels

4 4 4 4

Maximum

Memory Speed

2400MHz 2133MHz 2667MHz 2400MHz

Intel Turbo

Boost

Technology

2.0 2.0 2.0 2.0

Embedded

Options

Available

Yes Yes Yes Yes

Integrated

Intel

QuickAssist

Technology

No 40G 100G No

Intel

Virtualization

Technology

(VT-x)

Yes Yes Yes Yes

Intel

Virtualization

Technology

for Directed

I/O (VT-d)

Yes Yes Yes Yes

Intel TSX-NI

Yes Yes Yes Yes

Instruction Set

64-bit 64-bit 64-bit 64-bit

Instruction Set

Extensions

Intel AVX2 Intel AVX2 Intel AVX2 Intel AVX2

Number of

AVX-512 FMA

Units

1 1 1 1

10

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

In addition to the motherboards and chassis, several important parts that are included with

the system are listed below.

Main Parts List

Description Part Number Quantity

Power supply module

PWS-350-1H (for

1019D-FHN13TP or

1019D-4C-FHN13TP)

PWS-505P-1H (for

1019D-14CN-FHN13TP or

1019D-16C-FHN13TP)

1

Backplane BPN-SAS3-826TQ-B2B 1

Fans FAN-0154L4

4 (2 optional) for 1019D-FHN13TP and

1019D-4C-FHN13TP

6 for 1019D-14CN-FHN13TP and

1019D-16C-FHN13TP

Air shroud MCP-310-51303-0B 1

Riser card RSC-R1UW-2E16 1

Rack mount rails

MCP-290-00102-0N

MCP-290-00108-0N

1 set

1.2 Unpacking the System

Inspect the box in which the system was shipped, and note if it was damaged. If any equipment



Decide on a suitable location for the rack unit that will hold the server. It should be situated

in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and



Be sure to read the precautions and considerations noted in Appendix A.

11

Chapter 1: Introduction

1.3 System Features

The table below is an overview of the main features of the 1019D-FHN13TP,

1019D-4C-FHN13TP, 1019D-14CN-FHN13TP, and 1019D-16C-FHN13TP servers.

System Features

Motherboards

X11SDW-8C-TP13F for 1019D-FHN13TP

X11SDW-4C-TP13F for 1019D-4C-FHN13TP

X11SDW-14CNT-TP13F for 1019D-14CN-FHN13TP

X11SDW-16C-TP13F for 1019D-16C-FHN13TP

Chassis

SC513BTS-350WB for 1019D-FHN13TP and 1019D-4C-FHN13TP

SC513BTS-505WB for 1019D-14CN-FHN13TP and 1019D-16C-FHN13TP

CPU

Intel Xeon D-2146NT for 1019D-FHN13TP (in socket FCBGA2518)

Intel Xeon D-2123IT for 1019D-4C-FHN13TP (in socket FCBGA2518)

Intel Xeon D-2177NT for 1019D-14CN-FHN13TP (in socket FCBGA2518)

Intel Xeon D-2183IT for 1019D-16C-FHN13TP (in socket FCBGA2518)

Memory

Supports up to 256GB of ECC RDIMM or 512GB of ECC LRDIMM DDR4 memory

Speeds of up to 2133MHz for 1019D-FHN13TP

Speeds of up to 2400MHz for 1019D-4C-FHN13TP and 1019D-16C-FHN13TP

Speeds of up to 2667MHz for 1019D-14CN-FHN13TP

Chipset

System on Chip

Expansion Slots

Two PCI-E3.0 x16

One M.2 M-Key 2280/110 (PCI-E3.0 x4/SATA3)

One M.2 B-Key 2242/3042 (USB2.0 / USB3.0 / SATA3.0 / PCI-E3.0 x2)

One M.2 E-Key 2230 (USB2.0 / PCI-E3.0 x1)

Storage Drives

Two hot-swap 2.5" drives



One M.2 M-Key, PCI-E3.0 x4/SATA3

Note: The System Features table continues on the next page.

12

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

System Features

Power

1019D-FHN13TP and 1019D-4C-FHN13TP: 350W AC 80Plus Platinum level power supply

1019D-14CN-FHN13TP and 1019D-16C-FHN13TP: 500W AC 80Plus Platinum level power supply

Cooling

1019D-FHN13TP and 1019D-4C-FHN13TP: Four 40mm PWM fans, plus an option for two more fans

1019D-14CN-FHN13TP and 1019D-16C-FHN13TP: Six 40mm PWM fans

Input/Output

Nine RJ45 Gigabit Ethernet LAN ports (one for Ethernet management port); one dedicated IPMI LAN port

Two RJ45 10GbE LAN ports

Two 10G SFP+ LAN ports

Two USB3.0 ports (front)

One COM port via RJ45

One VGA port

Form Factor

1U rackmount; (WxHxD) 17.2 x 1.7 x 15 in. (437 x 43 x 382 mm)

13

Chapter 1: Introduction

Figure 1-1. Control Panel

1.4 Chassis Features

Power Button/LED

The main power switch is used to apply or remove power from the power supply to the server.

Turning off system power with this button removes the main power, but maintains standby

power.

Warning: To perform any maintenance tasks, you must unplug the system before

servicing.

Control Panel Features

Item Features Description

1 Informational LED Indicates one of multiple conditions, see Informational LED table below.

2 NIC2 LED 

3 NIC1 LED 

4 HDD LED 

5 Power LED

Indicates power is being supplied to the system power supply. This LED should

normally be illuminated when the system is operating.

6 UID LED The UID is used to switch/turn on/turn off UID LED next to PCI-E slots.

7 Power

The main power button is used to apply or remove power from the power supply to

the server. Turning off system power with this button removes the main power but

maintains system power. To perform maintenance tasks, you must also unplug the

system before servicing.

1

76

5432

Informational LED

Status Description

Solid Red The node is detecting an overheated condition.

1Hz Blinking Red The node is detecting a fan failure.

14

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

Front Chassis Features

Item Feature Description

1 Control Panel Front control panel with LEDs and buttons (see preceding page)

2 Drives Two hot-swap 2.5" SATA storage drives

3 I/O Ports Input/output ports (details below and Chapter 4)

4 UID LED 

5 PCI-E Position for expansion cards

Figure 1-2. Chassis Front View

Front Features

The illustration below shows the features included on the front of the chassis.

Figure 1-3. Input/Output Ports

Front I/O Ports

Item Description Item Description Item Description Item Description

1 COM1 6 LAN13 11 LAN2 16 LAN9

2 USB5 (USB3.0) 7 LAN12 12 LAN5 17 LAN8

3 USB4 (USB3.0) 8 LAN11 13 LAN4 18 UID SWITCH

4 IPMI LAN 9 LAN10 14 LAN7

5 LAN1 10 LAN3 15 LAN6

14

1

9

8

7

6

5

4

3

2

10

13

12

11

1817

16

15

1

4

3

2

5

15

Chapter 1: Introduction

Chassis Rear

The illustration below shows the features included on the rear of the chassis.

Figure 1-4. Rear View

Power Input

Kensington Lock

VGA

16

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

1.5 Motherboard Layout

         

connector, and LED locations shown. See the table on the following page for descriptions.



FAN4

FAN3

FAN1

FAN2

FANB

FANA

JD1

JF1

JSD1

JIPMB1

JNVI2C1

JTGLED2

JTGLED1

JBT1

JTPM1

JPI2C1

JPWR1

JBM1

JBM2

JLANLED1

S-SGPIO1

JLANLED3

JLANLED2

JSTBY1

LEDM1

LEDT4 LEDT2

JPG1

J1

JSMB1

JI2C1 JI2C2 JWD1

JPME2

JVRM1

JPL2 JPL3

JPT1

JPUSB1

JPL1

MH1

MH3

MH7

MH2

MH4

MH6

MH5

BT1

JMD2_SRW1

JMD1_SRW1

JMD3_SRW1

LED3

LED1

LED2

LEDT3

S-SATA2

S-SATA3

S-SATA1

JSIM1

JGP1

JPV1

S-SATA0

JVGA1

COM2

JRK1

JPW1

JMD1: M.2-H

JSDP3

JSDP2

JSDP1

LEDT1

PRESS FIT

AC

CA CA

A

C

A

C

CA CA

DESIGNED IN USA

BAR CODE

X11SDW-4C-TP13F

REV:1.01

LAN 1

COM1

USB 4/5

USB 2/3

USB 0/1

2-3:DISABLE

1-2:ENABLE

JPT1:TPM

: PCI-E X16+X16

JSXB1C

JSXB1B

JSXB1A

CPU

JPL3:

LAN 6/7/8/9

1-2:ENABLE

2-3:DISABLE

JPL2:

2-3:DISABLE

1-2:ENABLE

LAN 2/3/4/5

PCI-E 3.0 X1

JMD3:M.2-P

PCI-E 3.0 X2 / S-SATA4

JMD2:M.2-H

PCI-E 3.0 X4 / I-SATA4

UID

LAN 2/3/4/5/6/7/8/9

LAN 12/13

LAN 10/11

IPMI_LAN

ON

PWR

RST

X

NIC2

FF

OH

LED

NIC1

HDD

LED

PWR

JF1:

4-7:SPEAKER

1-3:PWR LED

JD1:

DIMMA1

DIMMB1

DIMME1

DIMMD1

JL1

JPH1

BT1

DIMMB1

DIMMA1

FAN1

JTPM1

JL1

LAN1

IPMI LAN

JPI2C1

DIMME1

DIMMD1

JSIM1

JPME2

JWD1

JGP1

LAN12/13

JVRM1

JBT1

LED3

LED2

JPH1

S-SATA0

LED1

JBM2

FAN2

FAN4

FAN3

UID

S-SATA1

JPG1

JLANLED1

LAN2-9

JBM1

JPV1

JSTBY1

JPWR1

JRK1

JSD1

JMD1

JLANLED2

JLANLED3

JTGLED1

JPL1

JPUSB1

JMD3

JTGLED2

COM1

USB4/5

LAN10/11

JSDP1

JSDP2

JSDP3

JF1

JPL2

JPL3

FANA

FANB

JPT1

JD1

JPW1

USB0/1

USB2/3

JNVI2C1

S-SATA3

S-SATA2

S-SGPIO1

JSXB1C

JMD2

JSXB1B

COM2

JI2C2

JI2C1

JSMB1

JIPMB1

LEDM1

JVGA1

JSXB1A

J1

17

Chapter 1: Introduction

Quick Reference Table

Jumper Description Default Setting

J1 M.2 SMBus Enable/Disable Pins 1-2 (Enabled)

JBM1 Disable IPMI Shared LAN Pin 1-2 Open (Enable)

JBM2 Disable Dedicated IPMI/Shared LAN Pin 1-2 Open (Enable)

JBT1 CMOS Clear Open: Normal

Closed: Clear CMOS

JI2C1/JI2C2 SMB to PCI-E Slots Enable/Disable Pins 2-3 (Disabled)

JPG1 VGA Enable/Disable Pins 1-2 (Enabled)

JPL1 LAN1 Enable/Disable Pins 1-2 (Enabled)

JPL2 LAN2/3/4/5 Enable/Disable Pins 1-2 (Enabled)

JPL3 LAN6/7/8/9 Enable/Disable Pins 1-2 (Enabled)

JPME2 Manufacturing Mode Select Pins 1-2 (Normal)

JPT1 TPM Enable/Disable Pins 1-2 (Enabled)

JPUSB1 USB0/1 Wake up Pins 2-3 (Disabled)

JVRM1 VRM SMB Data (to BMC or PCH) Pins 1-2 (BMC)

JWD1 Watch Dog Timer Pins 1-2 (Reset)

LED Description Status

LED1 Power LED Solid Green: Power On

LED2 UID LED 

LED3 Overheat/Power Fail/Fan Fail LED

Solid Red: Overheat

Blinking Red: Power Failure/Fan Failure

LEDM1 BMC Heartbeat Blinking Green: BMC Normal

Connector Description

BT1 Onboard Battery

COM1/COM2 COM1: Port, COM2: Header

FAN1 - FAN4, FANA, FANB CPU/System Fan Headers

IPMI LAN Dedicated IPMI LAN Port

JD1 Power LED/Speaker Header (Pins 1-3: Power LED, Pins 4-7: Speaker)

JF1 Front Control Panel Header

JGP1 General Purpose I/O Header

JIPMB1 System Management Bus Header (for IPMI only)

JL1 Chassis Intrusion Header

JLANLED1 LAN1 Activity LED Header

JLANLED2 LAN2-5 Activity LED Header

JLANLED3 LAN6-9 Activity LED Header

JMD1 M.2 Slot M-Key 2280/22110 (SATA3.0 / PCI-E x4)

JMD2 M.2 Slot B-Key 2242/3042 (USB2.0 / USB3.0 / SATA3.0 / PCI-E x2)

JMD3 M.2 Slot E-Key 2230 (USB2.0 / PCI-E x1)

18

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

Connector Description

JNVI2C1 Non-volatile Memory (NVMe) I

2

C Header

JPH1 4-pin HDD Power Connector

JPI2C1 Power I2C System Management Bus (Power SMB) Header

JPV1 12V 8-pin DC Power Connector (Required to provide extra power to the CPU, or as

alternative power for special enclosure when the 24 pin ATX power is not in use)

JPW1 GPU Power Connector

JPWR1 24-pin ATX Power Connector

JRK1 Intel RAID Key Header

JSD1 SATA DOM Power Connector

JSDP1 

JSDP2 

JSDP3 

JSIM1 Nano SIM Card Slot

JSMB1 System Management Bus Header

JSTBY1 Standby Power Connector

JSXB1A WIO Connector

JSXB1B WIO Connector

JSXB1C WIO Connector

JTGLED1 LAN10/11 Activity LED Header

JTGLED2 LAN12/13 Activity LED Header

JTPM1 Trusted Platform Module (TPM)/Port 80 Connector

JVGA1 VGA Header

LAN1 1G LAN Port (from I210)

LAN2/LAN3 10G SFP+ Ports

LAN4/LAN5 10G LAN Ports

LAN6 - LAN13 1G LAN Ports (from I350)

S-SATA0 - S-SATA3 SATA3.0 Ports

S-SGPIO1 Serial Link General Purpose I/O Header

UID 

USB0/1, USB2/3 Front Accessible USB2.0 Headers

USB4/5 Back Panel USB3.1 Ports

19

Chapter 1: Introduction

Figure 1-5. Chipset System Block Diagram

eSPI

CP

U

1

So

C

PE1[15:0]

DDR4 DIMM

A1

PE2[15:0]

DDR4 DIMM

B1

DDR4 1866/2133/2400/2666

B

A

DDR4 DIMM

E

D

KR

PCH

DDR4 1866/2133/2400/2666

SFI

X557-AT2

JLAN3

10G PHY

Flexible I/O

6,7

Flexible I/O

16

WIO SLOT PCIE 3.0 x32

PCIE 3.0 x32

Flexible I/O

20~21

Flexible I/O

12~15

Flexible I/O

10

Flexible I/O

11

Flexible I/O

8,9

PCIE 3.0 x2

SATA3.0#0

SATA3.0#1

SATA3.0#2

SATA3.0#3

SATA3.0#4

SATA3.0

USB

M.2(E-key)CONN(JMD3)

M.2(B-key)CONN(JMD2)

USB 2.0 Header

USB 2.0

USB 2.0 Header

USB2.0 HUB

PCIE 3.0 x2

I350 AM4

JLAN2

USB 3.0/2.0

USB 3.0 Rear I/O

JTPM1 Header

M.2(B-key)CONN(JMD2)

PCIE 3.0 x2

PCIE 3.0 x1

Flexible I/O

17

PCIE 3.0 x1

I210

JLAN1

Flexible I/O

18~19

Flexible I/O

22~25

PCIE 3.0 x4

M.2(M-key)CONN(JMD1)

SPI

BMC

AST2500

PCIE 3.0 x1

DDR4

COM1/2

FLASH

M.2(E-key)CONN(JMD3)

1G LAN(2x4)

JLAN4

VGA HEADER

PHY

3rd LAN

+

1G LAN

COM

USB3.0

10G LAN

SFP+

JLAN4

D1

E1

+

REAR IO

SuperServer 1019D-(4C/14CN/16C-)FHN13TP User's Manual

20

Chapter 2

Server Installation

2.1 Overview

This chapter provides advice and instructions for mounting your system in a server rack. If

your system is not already fully integrated with system memory etc., refer to Chapter 4 for



Caution: Electrostatic Discharge (ESD) can damage electronic components. To prevent such

damage to PCBs (printed circuit boards), it is important to use a grounded wrist strap, handle

all PCBs by their edges, and keep them in anti-static bags when not in use.

2.2 Preparing for Setup

The box in which the system was shipped should include the rackmount hardware needed to

install it into the rack. Please read this section in its entirety before you begin the installation.

Choosing a Setup Location

• The system should be situated in a clean, dust-free area that is well ventilated. Avoid areas



• Leave enough clearance in front of the rack so that you can open the front door completely

(~25 inches) and approximately 30 inches of clearance in the back of the rack to allow



• This product should be installed only in a Restricted Access Location (dedicated equipment

rooms, service closets, etc.).

• This product is not suitable for use with visual display workplace devices according to §2

of the German Ordinance for Work with Visual Display Units.

Rack Precautions

• 

the full weight of the rack rests on them.

• In single rack installations, stabilizers should be attached to the rack. In multiple rack in-

stallations, the racks should be coupled together.

Page is loading ...

Supermicro SuperServe 1019D-FHN13TP User manual

This manual is also suitable for

Supermicro SuperServe 1019D-FHN13TP User manual

Related papers

Other documents