Connects two external Male A-Type USB 3.0
headers with an internal 19pin USB 3.0 cable
Enables Front USB 3.0 ports on first
generation USB 3.0 motherboards
Enables Front USB 3.0 ports on USB 2.0
motherboards (ports run at USB 2.0 speed)
Easy installation: Plug and Play
Hot Swappable (can be connected and
removed while the system is running)
The Internal to External USB 3.0 Adapter can be used to connect
an internal 19Pin USB 3.0 cable, leading to the front USB 3.0 ports, to
external USB 3.0 ports. Thanks to the Cooler Master USB 3.0 Internal
to External Adapter, the latest cases are now backwards compatible
with first gen USB 3.0 motherboards that lack an internal USB 3.0
header. Alternatively, it can be used to enable front USB 3.0 ports on
motherboards without USB 3.0 support by connecting them to
external USB2.0 ports. (front USB 3.0 ports will run at USB 2.0
speeds)
Dimension: 280mm / 11.02 inch
Weight: 42g / 0.09lb
Application:
HAF 912 Advanced
CM690II Advanced
CM Storm Enforcer
I/O: 2 x USB 3.0 Internal ports
EAN Code 4719512035146
UPC Code 884102014819
Carton Size
(L x W x H)
27 x 22.2 x 22.5mm
(1.06 x 0.86 x 0.88 in)
Pallet Size
(L x W x H)
109 x 109 x216mm
(4.29 x 4.29 x 8.5 in)
128 carton / pallet
2560pcs / pallet
Internal to External
USB 3.0 Adapter (2 ports)
RA-USB-3002-IN
2 years
Features Specifications
Package Information
Warranty
*Photo time: 2011/10/6 (Photos may slightly differ from the final product)
Product Overview
Extend to external USB 3.0 ports
(Case: CM Storm Enforcer)
Appendix
/