ST-117

Shenzhen Star Sources Electronic Technology ST-117 User manual

  • Hello! I've reviewed the user manual for the Wireless Keyboard and Mouse Combo 2RBCP1513B0BL. This document describes the features of this 2.4GHz wireless combo, its plug-and-play functionality, and battery requirements. It also includes troubleshooting steps for re-pairing the devices and outlines the package contents. I'm ready to answer your questions about this device.
  • How to re-pair keyboard and mouse?
    What type of batteries are used?
    What are the contents of the packaging?
2.4GHz Wireless Keyboard and Mouse Combo
Model Number: 2RBCP1513B0BL
Spec:
* 2.4GHz Wireless keyboard and mouse combo
* Nano receiver stored inside the mouse
* Battery: 1* AA for keyboard, 1*AA for mouse
* Plug and play
* Size: 6.26 H*17.16 W*1.10 D for keyboard; 2.36 H*4.21 W*1.02 D for mouse
* Weight: 1.08 LBS for keyboard; 0.11 LB for mouse
* Keyboard layout: US
* Keyboard buttons: 104
* Mouse buttons: 3 ( right button, left button, mid scroll )
* Mouse resolution: 1000 DPI
* Mouse with rubberized anti-slip scroll
* Working voltage: 0.9~1.8V
* System: Windows and Mac
Trouble-shooting:
If keyboard and mouse was unable to be connected, press keyboard “ESC+Q” to re-pair the KB
and mouse.
Packaging content:
1* Mouse
1* KB
2* AA Batteries
1* Manual
FCC Waring Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This device generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television reception, which can be determined
by turning the device off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the device and receiver.
--Connect the device into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment
/