Bonrich 433MHz User guide

Quick Start Guide - BBS DVR Cameras

1. Connect your device to a power source.

If your device does not have a power cord to plug into an outlet,

there will be a battery for you to connect to the camera.

2. Power the device on using the

included remote. Hold the A button

for 1s and let go. The unit will vibrate

and power on into standby mode.

3. To enter motion detection mode,

press the D button once quickly. The

unit will vibrate three times and will

begin recording video once motion is

detected.

There will not be any vibrations to

indicate when motion is detcted and

recording begins.

4. Press the D button once quickly again and the unit will

vibrate twice to indicate it is exiting motion detection mode

and returning to standby mode.

Quick Tips

◊ While in standby mode, hold the C button for 3s and

let go. The unit will vibrate 3 times to indicate it is entering

continuous recording mode (1920x1080P resolution video).

◊ Press the C button once quickly to take a photograph.

◊ If your device is battery powered, make sure to charge it

for at least 4 hours prior to initial use.

Save Paper, Save Trees! Please scan the QR code on the included

checklist authorization sheet for the full product manual, or visit www.

mgidownloads.com > Product Manuals > Bush Baby Stealth

A)Power button

B)720P 24/7(press 1x)

C)Photo(press 1x)

C)1080P 24/7(hold 3s)

D)720P Motion (press 1x)

Download PDF