Etross SMS Gate Way User manual

Type
User manual

Etross SMS Gate Way is a versatile device that allows users to send and receive SMS and voice messages, manage SIM cards, and automate tasks. With its web-based GUI, users can easily configure and monitor the device. Additionally, the device supports bulk messaging, SIM card rotation, and IMEI modification. It also features APIs for integration with other systems.

Etross SMS Gate Way is a versatile device that allows users to send and receive SMS and voice messages, manage SIM cards, and automate tasks. With its web-based GUI, users can easily configure and monitor the device. Additionally, the device supports bulk messaging, SIM card rotation, and IMEI modification. It also features APIs for integration with other systems.

ETROSS SMS GATEWAY
GSM & 4G LTE
User Manual
1. Overview
4 models of Etross SMS gateway are available: 32 ports X 1 SIM, 16 ports X 1 SIM, 16
ports X 32 SIMs, 8 ports X 1 SIM.
Each model supports GSM or 4G network.
All 4 models share the same management WEB GUI.
GSM gateway does not support voice message function.
16 ports X 32 SIMs is used in this manual as an example for further explanation of WEB
GUI.
32 ports X 1 SIM
16 ports X 1 SIM
16 ports X 32 SIMs
8 ports X 1 SIM
2. Feature
a. GSM/4G.
b. WEB GUI management.
c. SIM card rotation.
d. SMS sent number limitation.
e. Bulk SMS.
f. Bulk voice messages delivery (support only 4G module).
g. Autorun task.
h. APIs for integration.
i. SIM card hot plug.
j. IMEI modification.
k. USSD.
3. Installation
4. Instructions
1. Setup the environment following the above illustration.
2. Insert sim card into the slots of the device.
3. Screw up antennas.
4. Obtain IP address of the device:
a. send SMS (*****01#) to a sim card of the device and wait for the reply SMS with IP
address. In case that no SMS is received, please go to method b.
b. Install USB-to-UART driver on PC(driver file name:
CP210x_VCP_Win_XP_S2K3_Vista_7.exe).
Via serial port with USB cable from PC to SMS gateway, use PUTTY (baud rate
57600) to get IP address.
Command: ifconfig
5. Open Chrome browser and input IP address to enter WEB-GUI.
5. WEB-GUI
5.1 Task
5.1.1 Running
1.Stop running task manually.
2.Built autorun tasks by clicking New button.
3.Setup all the items in below screenshot and the task will be running automatically.
5.1.2 Complete
1.Check task results by task name.
5.1.3 Incoming Calls
5.1.4 Receive SMS
SMS sent in inbox.
5.2 Device
5.2.1 Device status
Device status including model name, software version number, hardware version
number, run time, date and status for each port.
5.3 Sim Card
5.3.1 SIM Card status
List SIM status of every slot.
5.3.2 Lock & Unlock
Lock & Unlock the selected sim cards manually.
5.3.3 Manually Select
Put the selected sim card in use manually.
5.3.4 Statistics
List statistics of all the SIMs in the device.
5.4 Limitation
5.4.1 Call Count
List the remaining number of calls for each SIM if limitation is switched on.
5.4.2 Call Setting
Settings of call count limitation.
Enable: ON/OFF.
Renew: periodic reset of count.
Start time: together with “Duration of Renew” defines the reset period. 0 and 1440 mean
00:00 to 23:59 of a day.
Count: maximum number of outgoing calls.
5.4.3 SMS Count
List the remaining number for each SIM if limitation is switched on.
5.4.4 SMS Setting
Settings of SMS count limitation.
Enable: ON/OFF.
Renew: periodic reset of count.
Start time: together with Duration of Renew defines the reset period. 0 and 1440 mean
00:00 to 23:59 of a day.
5.5 Human Behavior
5.5.1 SIM Rotate
Statistics of the current sim card in use of each port.
5.5.2 Rotate Setting
4 rotate rules in total.
5.6 Port
5.6.1 ON/OFF
Manually turn on/off the selected ports.
5.6.2 Port IMEI
List IMEI of all slots.
5.6.3 IMEI Setting
Customize IMEI for all slots.
5.6.4 Board IVR File
Upload IVR file to selected ports.
File format: monophonic recording with .wav postfix.
Note: this function is only available with EC25 module.
5.7 System
5.7.1 General
General settings including language, port number, time zone, etc.
5.7.2 Network
Network configuration, support both DHCP and STATIC.
5.7.3 Backup & Restore
Backup device configuration into local files, restore device configuration from local
files.
5.7.4 API
Enable & disable API interface, API setup including port number, user and password.
5.7.5 Upgrade
Software upgrade via WEB-GUI.
5.7.6 Reset & Reboot
Soft reset & reboot device.
5.7.7 Username & Password
Setup username and password.
By default:
Username: admin
Password: admin
5.7.8 Debug
6. Packing list
Name
Quantity
SMS Gateway
1
Antenna
16
User Manual
1
USB Cable
1
AC adapter
1
Network Cable
1
7. Appendix
Model Name
Port Number
16
Slot Number Per Port
32
Built-in 4G modem
RF Bands:
FDD: B1/B3/B5/B7/B8/B20 TDD:
B38/B40/B41
WCDMA: B1/B5/B8
GSM: 900/1800
Noise level
Fanless
Network Protocols
IPv4, TCP, UDP, PPPoE, DHCP, DNS,
NAT, HTTP, FTP, TFTP
Configuration
and Maintenance
WEB-GUI
Console, SSH command line
Firmware Update
TFTP, HTTP, SSH, COM
Hardware Interface
1 LAN 10/100Base-T Ethernet (RJ-45
connector)
1 console (USB connector)
LEDs
1 power and 64 groups of signal strength
and running indicator (defining...)
Power Supply
100-240VAC, 50 - 60 Hz
Dimensions
Width: mm
Height: mm
Depth: mm
Weight
Operating
Environment
Operating temperature: 0ºC~60ºC
Operating humidity: 5– 95%
Warranty
12 Months
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Etross SMS Gate Way User manual

Type
User manual

Etross SMS Gate Way is a versatile device that allows users to send and receive SMS and voice messages, manage SIM cards, and automate tasks. With its web-based GUI, users can easily configure and monitor the device. Additionally, the device supports bulk messaging, SIM card rotation, and IMEI modification. It also features APIs for integration with other systems.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI