2. TCL
  3. B123

TCL B123 Operating instructions

  • Hello! I've reviewed the provided user manual for network nodes. This document provides guidance on how to connect secondary nodes to the internet. It covers key aspects such as optimal placement, understanding LED indicator statuses, and both wired and wireless connection methods. I'm ready to answer your questions about setting up and using these network devices.
  • How should I place my network nodes?
    What does it mean when the LED indicator is solid green?
    How do I access the internet with wired devices?
    How can I access the internet with wireless devices?
EN - 4
Connect the secondary nodes to the
internet
1. Place each node:
– At a high and open area.
– Ensure that the wall between the nodes is less than two.
– Keep your nodes away from electronics with strong
interference, such as microwave, Inducon cooker and
refrigerator.
2. Use the other power adapters to connect the remaining
secondary nodes to power sources, their LED indicators
light solid green. Wait about for 40 seconds. The secondary
node is connecng to another node when its LED indicator
blinks green.
3. Observe the LED indicators of the secondary nodes unl
their LED indicators light one of the following colors:
Solid green: Good connecon
Solid yellow: Fair connecon
Solid red: Disconnected
4. If a node’s LED does not light sold green, relocate It
according to placement ps to get It beer connected.
• To access the Internet:
– Wired devices: Connect wired devices to the LAN ports
of your nodes.
– Wireless devices: Connect wireless devices to your WiFi
network using the SSID and WiFi password you set.
• If you want to manage the network anyme anywhere, tap
and use your account to login.
/