American muscle CH3215 Installation guide

Step 1:

Using a trim panel removal tool, carefully pry between the

front sidemarker light and the bumper to release the clip.

Slide the sidemarker light out to remove from the bumper.

Step 3:

Connect the factory sidemarker connector into the new

light, and push in the red tab to secure.

Installation Instructions for 2015-2018 Challenger Front LED Sidemarker Lights

Step 2:

Unlock the red retaining clip, press and release the factory

wiring connector from the factory light.

Step 4:

Insert the locating tab into the bumper, and then carefully

press the light until it clicks into place securing it to the

bumper.

CH3215

CH3216

Installation Instructions for 2015-2018 Challenger Rear LED Sidemarker Lights