Axial CH3217 Installation guide

Step 1:

Using a trim panel removal tool, carefully pry between the

front sidemarker light and the bumper to release the clip.

Slide the sidemarker light out to remove from the bumper.

Step 3:

Plug in the light into the factory light socket. Twist the light

socket into the light clockwise. **Note: Test the light for

proper function. If it does not light up, rotate the socket

180 degrees.

Installation Instructions for 2008-2014 Challenger Front LED Sidemarker Lights

Step 2:

Twist the socket counter-clockwise to remove from the

factory light. Then remove the bulb from the socket.

Step 4:

Insert the locating tab into the bumper, then carefully press

the light until it clicks into place securing it to the bumper.

CH3217

CH3218

Towards Front of

Vehicle

Installation Instructions for 2008-2014 Challenger Rear LED Sidemarker Lights

Step 1:

Using a trim panel removal tool, carefully pry between the

rear sidemarker light and the bumper to release the clip.

Slide the sidemarker light out to remove from the bumper.

Step 3:

Plug in the light into the factory light socket. Twist the light

socket into the light clockwise. **Note: T

est the light for

proper function. If it does not light up, rotate the socket 180

degrees.