Activates Standing mode.

Activates Normal mode.

Normal mode - moves chair or stretcher upwards.

Standing mode - raises stretcher into tilt table position.

Normal mode - moves chair or stretcher downwards.

Standing mode - lowers tilt table into stretcher position.

Normal mode - changes from stretcher into chair position.

Standing mode - not available.

Normal mode - changes from chair to stretcher position.

Standing mode - tilts the tilt table left.

Normal mode - tilts chair or stretcher right.

Standing mode - tilts the tilt table right.

Control panel Hand control

08.KC.02EN_4 • 05/2020 • Page 1/2

Sara Combilizer

QUICK REFERENCE GUIDE - CONTROLS

Hold the side of the calf section frame and manually lift the calf section upwards (1) until it latches in the hori-

zontal (vascular) position (2). Use the caregiver controls or ACP to lower the thigh section to the angled

(Fowler) position.

Stretcher to chair –

Chair to stretcher

Stretcher to Trendelenburg –

Trendelenburg to stretcher

Tilt left or right

ArjoHuntleigh AB

Hans Michelsensgatan 10

211 20 Malmö, Sweden

www.arjo.com

08.KC.02EN_4 • 05/2020 • Page 2/2