USB2.0 7 in 1 Card Reader Manual
Guide for Windows 98SE
(Do not Plug Card Reader into USB port before CD setup)
1. Insert Driver CD into CD-ROM.
2. Open the D:\DRIVER\USB 2.0 7 in 1 Combo Card Reader \USB 2.0 DRIVER\7 in
1\Win98\SETUP.exe
a: Click ”OK”
3. Plug Card Reader to USB port after restarted.“My Computer ” shown 4 more
icons. The installation has been completed
Installation guide for Windows 2000
(Do not Plug Card Reader into USB port before CD setup)
1. Insert Driver CD into CD-ROM.
2. Open the D:\DRIVER\USB 2.0 7 in 1 Combo Card Reader \USB 2.0 DRIVER\7 in
1\Win2000\Install.exe
a: Click”YES ”
b: Click”OK ”
3. Plug Card Reader to USB port after restarted.“My Computer ” shown 4 more
icons. The installation has been completed
Guide for Windows ME/XP
No driver is needed. “My Computer” shown 4 more icons after inserts card reader
into USB port. Be free to use card reader.
Notes: In “My Computer”, flash cards are not addressed on the icons due to Windows
ME/XP provides the original driver for card reader.
Guide for Mac OS 9.X
(plug card reader to USB port before CD setup)
1. 1. Insert CD into CD-ROM.
2. 2. Double click CD-ROM icon and find path to "USB 1.1
DRIVER\7in1\installer".
3. 3.
Double click "installer" The driver will be installed automatically.
4. 4.
Restart the computer after completed the driver.
5. 5. Plug the Card Reader into the USB port after computer starts.
Note: An “untitled” HDD icon on the desktop after inserts one Flash Card. Two
“untitled” HDD icons on the desktop after insert two kinds of Flash Card, and so
on.
Guide for Mac OS 10.1.2 or above
(No driver is needed)
1. Plug USB Card Reader into USB port.
An “untitled” HDD icon on the desktop after inserts one Flash Card. Two “untitled”
HDD icons on the desktop after insert two kinds of Flash Card, and so on.
/