19
Issue No: 12/2015-01 Rev: 01
Transport
When sending the product, use the original packing materials, the inner and outer
cartons. If the original packaging is no longer available, use at least bubble wrap and
insert the product in a carton which holds at least 40kg. Important: Any damage in
transit, including scratches, breaks and indentaon in the housing of the product is
NOT covered by this warranty.
NOTE: The use of chlorine or chlorine related products for cleaning can seriously
damage the nish and funcon on the aluminium and plasc surfaces.
Verification of Conformity
EMC Directive 2004/108/EC
Certification No.: TOS11121640
Test Report Ref. No.: 68.5.12.11.0469.01
Holder Of Certificate:
Guangzhou Dajing Science and Technology Co., Ltd.
2007-2008, 2F, Block A3, Longyuan Building, 561 Tianhe Road, Tianhe
District, Guangzhou, China
Manufacturer: GuangZhou Dimesion electronic CO., LTD
Product:
AC Adapter
Model No.: Please refer to the annex
Parameters:
Please refer to the annex
Standards:
EN 55022:2010, EN 55024:2010
EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008
The statement is based on a single evaluation of one sample of above mentioned products. It does not imply an assessment
of the whole production and does not permit the use of the test lab. Logo.
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in
this report. The applicant should hold the whole technical report at disposal of the competent all the right.
Issued Date:2011-12-30
Prince Wang
Chief Director
After preparation of the necessary technical documentation as well as the EC Declaration of
Conformity the required CE marking can be affixed on the product. Other relevant directives have to
be observed.
A
A
p
p
p
p
r
r
o
o
v
v
e
e
d
d
b
b
y
y
:
:
T
T
E
E
N
N
-
-
O
O
N
N
E
E
S
S
E
E
R
R
V
V
I
I
C
C
E
E
S
S
C
C
O
O
.
.
,
,
L
L
T
T
D
D
.
.
W
W
e
e
b
b
s
s
i
i
t
t
e
e
:
:
w
w
w
w
w
w
.
.
t
t
o
o
s
s
-
-
a
a
s
s
i
i
a
a
.
.
c
c
o
o
m
m
The warranty is in eect for the period and usage described above from the date of purchase
from MT Displays. MT Displays can supply parts and accessories aer warranty expires.
To Claim Your Warranty
1. Please contact your distributor or reseller and explain the nature of problem with photos
of the product which shows clearly defect and the environment it has been used.
2. Provide your supplier batch number on Digital Signage unit and proof of purchase.
3. If the claim is within the warranty period and within the terms of the warranty, you will be
required to return your product to manufacturer to analyse the nature of problem at your
cost.
4. As long as the manufacturer conrms the problem is a manufacturing fault, the
replacement can be provided. Unless product or any parts are not returned the
manufacturer for analyses, manufacturer cannot provide replacements.
5. It is user’s responsibility to return the product to distributor or reseller or collect the
replacement.