2. Alcatel-Lucent
  3. 1850 TSS-5

Alcatel-Lucent 1850 TSS-5, Switch 1850 TSS-5 User manual

  • Hello! I am an AI chatbot trained to assist you with the Alcatel-Lucent 1850 TSS-5 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Alcatel-Lucent1850TSS-5
TRANSPORTSERVICESWITCH|RELEASE5.1
The Alcatel-Lucent 1850 Transport Service Switch (TSS-5) is a compact, modular, Packet-Optical Transport
switch serving TDM and packet traffic from T1/E1 to Gigabit Ethernet (GE). More than a traditional multiservice
provisioning platform (MSPP), the Alcatel-Lucent 1850 TSS-5 supports pseudowire emulation edge to edge
(PWE3) for T1/E1 circuit emulation services (CES) over Ethernet uplinks. This combination of pseudowire support
of CES, native Ethernet transport and native TDM transport with Ethernet over SONET/SDH allows service pro-
viders to transform their networks with a mix of SONET/SDH and Ethernet appropriate to their service profile.
Service providers can gracefully migrate their TDM traffic to Packet-Optical Transport using this compact, cost-
effective platform.
Particularly suitable for mobility-backhaul
applications and TDM and Ethernet
services aggregation in general, the
Alcatel-Lucent 1850 TSS-5 is further
applicable to any market where TDM
andCarrierEthernetservicescoexist.
An integral part of the broader Alcatel-
Lucent 1850 TSS portfolio, the Alcatel-
Lucent 1850 TSS-5 operates in the
access/aggregation layer and feeds
into higher-capacity Alcatel-Lucent
Packet-Optical Transport products,
such as the Alcatel-Lucent 1850 TSS-100
andAlcatel-Lucent1850TSS-320.
Features
• FlexibleaggregationofTDMor
Ethernet service over TDM or
Ethernet transport
• T1/E1CESoverEthernettransport
through static Multi-Protocol Label
Switching(MPLS)PWE3withBDF-
based tunnel protection
• DifferentialtimingforCESusingIEEE
1588v2 for reference clock distribution
• Carrier-gradeEthernetwithhigh
reliability and Ethernet OAM stan-
dards support
• E1/T1,E3/DS3;FastEthernet(FE)/GE;
OC-3/12,STM-1/4;channelizedOC-3/
STM-1
• SmallFormFactorPluggable(SFP),
coarse wavelength division multi-
plexing(CWDM)-compatibleoptics
forSONET/SDHandGE
• Compact,environmentallyhardened
for outside-plant deployment
Benefits
• Enablesnetworktransformation
fromTDMtopackets:
¬ Transitions gracefully from TDM-
based to packet-based transport
¬ Eliminates overlay networks for
packet services
• Optimizedforkeyapplication:mo-
bility backhaul for smooth transition
fromTDMtopacketfor2G,
3Gand4Gnetworks:
¬ FlexiblybackhaulsthroughCES/
pseudowire
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo
are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility
for inaccuracies contained herein. Copyright © 2008 Alcatel-Lucent. All rights reserved.
CAR4688080810 (09)
Technical specifications
Alcatel-Lucent 1850 TSS-5 system
• 5Gb/schassis
• Twomultiserviceinterfaceslots
• Twohalf-slotsforcontrollerand
interface modules
• SFPtransceiversforallSONET/
SDHandGEinterfaces
• CWDMopticsforallSONET/SDH
andGEinterfaces
Alcatel-Lucent 1850 TSS-5
service interface modules
Ethernet module
• 20x100BASE-TX(10/100)plus
4xGE(100/1000opticalor
1000 electrical)
• 6xFE:half-slotmoduleforEoS,
4x100BASE-Tplus2x100BASE-FX
SONET/SDH transport with Ethernet
over SONET/SDH (EoS) modules
• 8-portT1/E1
• 28-portT1or21-portE1
Both 8-port and 28/21-port models
equipped with:
• 3xDS3/E3:DS3Transmultiplexer
(TMUX);1channelized,2unchan-
nelized;withFEACloopbackand
alarms
• 1xGE:1000opticalorelectrical
• 2xOC-3/12orSTM-1/4
CES modules
• 8-portT1/E1
• 16-portT1/E1
• 1-portOC-3/STM-1,channelized
toT1/E1
Each CES module equipped with:
• 2xGE:100/1000,optical
or electrical
• Loopanddifferentialtiming
• IEEE1588v2forclockdistribution
Ethernet functionality
• IEEE802.3Ethernetinterfaces
10/100/1000Mb/s
• MediaAccessControl(MAC)
bridging,IEEE802.1D,including
RapidSpanningTreeProtocol
(RSTP)andMultipleSpanning
TreeProtocol(MSTP)
• 16,000MACtable
• Virtuallocalareanetwork(VLAN)
bridging,IEEE802.1Q
• ProviderbridgingIEEE802.1ad,
Ethernetline(E-line),Ethernet
LAN(E-LAN)
• Linkaggregation
• Layer2controlprotocoltunneling
aggregation
• EthernetOAMIEEE802.3ahlink
loopback
• ConnectivityFaultManagement
(CFM)IEEE802.1ag:loopbacks,
connectivity check, link trace
• EthernetRingProtectionG.8032
• Jumboframes:9kb
• Fullduplex,flowcontrol,MDIX
• Portmirror:inand/orout
• Layer2andLayer3Access
Control Lists (ACLs) for filtering
and rate limiting
• Multipleclassificationoptions:
port,VID,P-bits,MACDA/SA,
differentiated services code
points(DSCP)
• EightQualityofService(QoS)
classes
•Ingresspolicing
•Class-basedqueuing
• Strictpriority,weightedround
robin(WRR)schedulingand
tail-drop
•Egressshaping
• MultilinkPoint-to-PointProtocol
(MLPPP)-Ethernetinterworking
with static routing
•Port-basedstatistics
PWE3 functionality
• T1/E1pseudowires:RFC4553,
structure-agnosticTDMover
packet(SAToP)
•Bidirectionalforwardingdetec-
tion(BFD)for1+1tunnel
protection
• RelatedRFCs:4553,4446,4197,
3985,3916
SONET/SDH functionality
• Unidirectionalpath-switchedring
(UPSR):VT1.5/STS1/STS-3c,Sub-
networkConnectionProtection
(SNCP,VC-12/3/4)
• EoS:framemappedgeneric
framingprocedure(GFP-F),
virtualconcatenation(VCAT)
includinglow-orderVCAT,link
capacity adjustment scheme
(LCAS),clientsignalfail(CSF)
• Linetiming,SSMwithauto-re-
configurationandDS1/E1building
integratedtimingsupply(BITS)
output;free-run
•Equipmentprotection
• StandardSONET/SDHperfor-
mance monitoring, loopbacks
• DS1in-bandloopback
• DS3FEACloopbackandalarms
Management
• Alcatel-Lucent1350Optical
ManagementSystem(OMS)
• Alcatel-Lucent1340Integrated
NetworkController(INC)
• TransactionLanguage1(TL1)
• Command-lineinterface(CLI)
• SimpleNetworkManagement
Protocol(SNMP)v2,v3
• SONET/SDHdatacommunication
channel(DCC)
• IPtunnelingforremotesoftware
download
Physical specifications
Dimensions and weight
• Height:125mm(4.9in.)
• Width:441mm(17.4in.)
• Depth:280.6mm(11.0in.)
• Weight,fullyloaded:6.8kg(15.0lb)
• StandardANSIorETSIframes
Power
• -48-VDCor+24-VDC
• Redundantpower-supplyoption
• Currentdrain:2.5Amaximum,
at-48-VDC
• Maximumheatdissipation:100W
Environmental
• Hardenedforoutside-plant
operation
• Operatingtemperature:
-40ºCto+65ºC
• Humidity:5%to95%,
non-condensing
Regulatory compliance
• NEBSLevel3GR-1089-CORE
Issue4,GR-63-COREIssue3
• CEMark:EN300386
• IEC60825-1andIEC60825-2,
21CFR1040
• UL/CSA60950-1,CSAC22.2
No.60950-1,EN60950-1
• EN55022ClassA:radiatedand
conducted emissions
• EN61000-4-2,-3,-4,-5,and-6
• ETSI300-019Storage,Class1.2;
Transportation,Class2.3;Opera-
tional,Class3.2
• FCCPart15andIndustryCanada
ICES-003ClassA
• FCCPart68
• ANSIT1.315/ETSEN300-132-2
¬ Efficiently grooms and delivers
traffic at the mobile telephone
switching office (MTSO) through
SONET/SDH interfaces
¬ Is environmentally hardened for
cell-site deployment
¬ Delivers cost-effective, Layer 1 and
Layer 2 oriented network infra-
structure at cell site and MTSO
• Offersadditionalapplications:
hybrid TDM and Ethernet services
forbusinessandresidentialservices:
¬ Delivers unified platform for both
services
¬ Offers fast time-to-market
• Mixesdata,voiceandmultimedia
services on one platform
• Seamlesslyoperatesincircuitand
packet networks
/