2. EarthConnect
  3. ECHFOPIRLV
ECHFOPIRLV

EarthConnect ECHFOPIRLV Owner's manual

  • Hello! I have analyzed the provided document, which is an instruction manual for the EarthTronics Plug & Play Controller/ Node model ECHFOPIRLV, a device with a built-in PIR sensor and plug-in audio jack sensor. This document outlines the installation process, including drilling the fitting, ensuring dimming compatibility and using the EarthConnect app. I'm ready to assist with any questions you may have about this device.
  • What should I do before installing the unit?
    What size knockout is required for installation?
    How do I commission the sensor?
Document Instructions
Rev. Date 4.24.2023
Order Code 11806
Model # ECHFOPIRLV
WARNING
Please consult a licensed electrician for installation. Turn off the power at
circuit breaker before installing the unit.
FEATURES
•Drill 1/2" KO in the sheet metal for ECHBPIR1 installation, make sure the ECHBPIR1 is fixed in the luminaire.
•Please call a licensed electrician for installation.
•Drill 1/2" KO in the sheet metal forSC01 receptacle installation, make sure
•the SC01 well fixed in the luminaire.
•Make sure the luminaire can be 0-10V dim to off, and the driver have AUX output.
•Screw in the sensor into the receptacle and make sure the connection is tight.
•Ensure the rubber gasket touches the outside surface of t he fixture.
•Attach the lens to sensor and turn the lens module clockwise to ensure it locks in place.
•Please refer below diagram for Wiring.
•Return power back to source.
•Commissioned the sensor via EArthConnect App.
EarthTronics, Inc. | Norton Shores, MI 49441 | www.earthtronics.com | Email: [email protected]
Toll Free: 866.632.7840 Rev. 4.25.23 | EC11806
LEARN MORE: EarthConnect
www.earthtronics.com/earthconnect
WIRIING
Plug & Play Controller/ Node
With Plug-in Sensor (Audio Jack) 12V DC, built-in PIR Sensor
Download the EarthConnect App Download the app instructions
/