smart water Wireless Tank Level System User guide

Wireless Tank Level System
Brand
smart water
Model
Wireless Tank Level System
Type
User guide

This manual is also suitable for

The smart water EKEQ9 is a wireless tank level system that provides accurate and reliable water level monitoring for various tank types and sizes. With its easy installation and user-friendly interface, you can effortlessly track your water usage, set alerts, and optimize your water management.

Key features of the smart water EKEQ9 include:

  • Real-time water level monitoring: Get instant updates on the water level in your tanks through the intuitive LCD display or the Smart Water app.

  • Remote access and control: Conveniently monitor and manage your water system from anywhere using the Smart Water app on your smartphone or tablet.

The smart water EKEQ9 is a wireless tank level system that provides accurate and reliable water level monitoring for various tank types and sizes. With its easy installation and user-friendly interface, you can effortlessly track your water usage, set alerts, and optimize your water management.

Key features of the smart water EKEQ9 include:

  • Real-time water level monitoring: Get instant updates on the water level in your tanks through the intuitive LCD display or the Smart Water app.

  • Remote access and control: Conveniently monitor and manage your water system from anywhere using the Smart Water app on your smartphone or tablet.

Quick Start Guide
Wireless Tank Level System
Components
in the kit
Ph: +64 9 278 6430
NZL: 0800 40 14 14 | AUS: 1800 76 47 25
www.smartwateronline.com
A WiFi LCD Keypad or WiFi Gateway
B Water Sensor
C Tank Transmitter and Mounting Screws
D Antenna
E Power Supplies
AND / OR
B C
D E
AND / OR
OR OR
A
Quick Start Guide 3
Step 1. Step 2.
Attach Antenna to the LCD or Gateway.
Plug in the Power Supply
and connect it to the LCD or WiFi Gateway.
Note: For the Wall Mount WiFi LCD Keypad, Smart Water
recommends installation by a certified electrician.
Attach Antenna to the Tank Transmitter.
Quick Start Guide 54 Wireless Tank Level System
Step 3 Step 4 (LCD)
Connect the Water Sensor to the connector
on the underside of the Tank Transmitter.
Rotate the thumb screw on the end of the
connector until it is securely locked.
Ensure the LCD is in the
“Add Device” screen.
The LCD will beep and
display “Tank 1 Added”.
Press the button next to the LED
which will illuminate blue for
two seconds followed by two
short white flashes to confirm
connection to the LCD or Gateway.
Once the connector is
plugged in the LED will
flash green until the
unit has successfully
booted up.
Quick Start Guide 76 Wireless Tank Level System
Step 5
Gently lower the water
sensor into the tank so
it sits on the bottom.
Position the sensor away
from any outflow pipes.
Any excess cable can also
be lowered into the tank.
Fix the tank transmitter to
the top of the tank using the
screws provided. Ensure the
solar panel has good access
to sunlight.
Step 4 (App)
If you are setting up your system
using the App, download the
Smart Water App from your
preferred app store.
Follow on-screen instructions
under "Set up a new system"
to connect to WiFi.
When prompted by the
App, press the Connect
Button on the bottom of the
Tank Transmitter which will
illuminate blue for two seconds
followed by two short white
flashes to confirm connection
to the LCD or Gateway.
Quick Start Guide 98 Wireless Tank Level System
Step 6 Congratulations!
If desired, set a customised
name for your tank.
A Tank transmitter F water sensor
Your system is installed.
Repeat the “Add Device”
process for any additional
tanks or pump controllers to
be connected to the system.
Allow time for Smart Water
to learn the water usage
of each connected tank.
The LCD and App will
provide detailed data
of your water level and
usage after a few days.
Check out the forecasting and
weather page on the App.
Finally, invite other users
to view or edit your system
via the Smart Water App.
For comprehensive set-up instructions, download
the full manual from www.smartwateronline.com
Set your Outflow Height,
this is the height that water
is drained from your tank,
normally around 0.1m.
Using tank settings on the
LCD touch screen or App,
set your Tank Height.
If your tank is 2.4m
high, set 10% lower than
this, so approx 2.2m.
This allows the system
to auto calibrate your
exact 100% level.
Quick Start Guide 1110 Wireless Tank Level System
Optional
Pump Controller
Go to the “Add Device”
screen on the LCD or
the “Add a new device”
screen on the App.
Power the pump
controller based on the
model in use (230V AC,
12V DC, or Change-Over).
A Tank transmitter B Desk Mount LCD C Power Supply D Gateway E Antenna
Connect the pump
controller in series with
your pump, relay or
contactor.
Press the “Connect”
button on the pump
controller.
The LCD or App will
confirm successful
connection of the
device to your system.
Set a customised
name for your pump
controller if desired.
Set up automatic rules
for the pump operation
via the LCD or App.
A Tank transmitter F water sensor
This product is very
simple to operate...
just turn it on!
Optional
Active
Repeater
Position the repeater
in a location which
has line of sight to
the tank transmitter
or pump controller
and also to the WiFi
LCD touch screen
or WiFi Gateway.
Optimise the
repeater position for
access to sunlight.
Quick Start Guide 1312 Wireless Tank Level System
A Tank transmitter B Desk Mount LCD C Power Supply D Gateway E Antenna
Be gentle when handling
the Water Sensor, it is
a precision measuring
instrument and can
be easily damaged
Ensure maximum access
to sunlight for the Tank
Transmitter solar panel
Try and optimise Antenna
position for best reception
Charge up your Tank
Transmitter for 3-4 hours
before installation
If using a Pump Controller
be sure to set the run-timer
Smart Hints for
best performance
Additional
Accessories
These and other Smart Water accessories
can be purchased online at
www.smartwateronline.com
Yagi Antenna
High Power Dipole Antenna
Bracket Mount Antenna
Extra Tank Units and Pump Controllers
Active Repeaters
Quick Start Guide 1514 Wireless Tank Level System
Wireless Tank Level System
2
W
A
R
R
A
N
T
Y
W
A
R
R
A
N
T
Y
Y E A R
See more at www.smartwateronline.com
© Copyright 2019 Ivent Solutions Limited. Patent pending.
Ph: +64 9 278 6430
NZL: 0800 40 14 14 | AUS: 1800 76 47 25
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

smart water Wireless Tank Level System User guide

Wireless Tank Level System
Brand
smart water
Model
Wireless Tank Level System
Type
User guide
This manual is also suitable for

The smart water EKEQ9 is a wireless tank level system that provides accurate and reliable water level monitoring for various tank types and sizes. With its easy installation and user-friendly interface, you can effortlessly track your water usage, set alerts, and optimize your water management.

Key features of the smart water EKEQ9 include:

  • Real-time water level monitoring: Get instant updates on the water level in your tanks through the intuitive LCD display or the Smart Water app.

  • Remote access and control: Conveniently monitor and manage your water system from anywhere using the Smart Water app on your smartphone or tablet.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents