Moen 900-001 is a smart home water monitoring and leak detection system that provides remote, automatic, and manual water on/off capability. With its WiFi connectivity, you can use the smartphone app to receive proactive maintenance alerts, remotely control and shut off the water, set water consumption goals, monitor water usage, set system modes, and see real-time flow, pressure, and temperature readings. It works with Amazon Alexa, Google Assistant, Alarm.com, and Ring.com.
Moen 900-001 is a smart home water monitoring and leak detection system that provides remote, automatic, and manual water on/off capability. With its WiFi connectivity, you can use the smartphone app to receive proactive maintenance alerts, remotely control and shut off the water, set water consumption goals, monitor water usage, set system modes, and see real-time flow, pressure, and temperature readings. It works with Amazon Alexa, Google Assistant, Alarm.com, and Ring.com.
DESCRIPTION
· 3/4" Smart home water monitoring and leak detection system
OPERATION
· Remote, automatic, and manual water on/off (shut-off) capability
· WiFi enabled device for smartphone connectivity
· Smartphone app available for iOS and Android that provides the following:
•Proactive maintenance alerts (i.e. leak alert, pressure alerts, etc.)
•Remote water control and shut-off
•Set water consumption goals and monitor water usage
•Set system modes (home, away, sleep)
•See real-time flow, pressure, and temperature readings
•Run manual leak detection tests “Health Tests”
· Works with Amazon Alexa, Google Assistant, Alarm.com and Ring.com
FLOW
· Maximum operating pressure of 175 psi
STANDARDS
· Third party certified to standard IAPMO IGC 349 and all applicable standards listed therein
· Third party certified to standards UL1951, CSA C22.2 no. 14 and no. 68 and all applicable standards listed
therein
· Third party certified to standards NSF 61/9 and NSF 372 and all applicable standards listed therein
· Conformant to FCC part 15 Class C
· Conformant to Innovation, Science and Economic Development Canada (ISED) RSS-247
WARRANTY
· Moen® warrants that the product will be free from defects in materials and workmanship
for a period of one (1) year from the date of delivery following the original retail purchase
· Extended product warranty available through FloProtect plan
Visit moen.com/customer-support/warranty for complete details and limitations
Installation Notes:
· Install product following the installation guide
· Must be installed on accessible main water supply line (cold water line) that is 0.75 inch diameter
(can be installed on 1.25 inch diameter or smaller)
· Must be installed after water meter, water shut-off, and pressure regulating valve (if applicable)
· Power supply and device must not be installed where the ambient temperature can exceed
140 deg F (60 deg C) or below 32 deg F (0 deg C)
· Requires electrical outlet (100-240VAC-50/60 Hz) with continuous power within 6 feet of device
· Requires WiFI network (WLAN connectivity/IEEE 802.11bgn, 2.4 GHz range)
· Smartphone (iPhone or Android) with installed app required
For Well Pump System Installations:
· When installed on well or irrigation water service lines, the device should be placed after
(downstream) of all treatment and filtration components to avoid debris interference. It should also
be installed after the well pump and water storage tank. If it is necessary to install the device prior
to a water filtration system, a wye strainer with a 100 mesh or finer screen and blow-down port is
required to catch any sediment or particles from the ground source or casing. The mesh screen in the
strainer may require periodic maintenance.
3/4" Flo Smart Water
Monitor and Shutoff
Smart Home Water Monitoring
and Leak Detection System
Model: 900-001
CRITICAL DIMENSIONS
Included with product: 3/4" inch-NPT threaded brass tailpieces (x2),
AC adapter (12 VDC, 100-240VAC-50/60 Hz) with 10' cable (x1),
spare o-rings (x2), installation spacer (x1), 5/16" hex key (x1)
10' AC Adapter
(included)
Power
Input
Water
Flow
Direction
Backup
Shutoff
Installation Spacer (included)
SECTION B-B
SCALE 1 : 1
SECTION C-C
SCALE 1 : 1
B B
C
C
DRAWN BY
JAS
APPROVED
HH
3/11/2019
3/11/2019
SIZE SCALE
DWG NO
430-00023
REV
SHEET
1
OF
1
DATE
FLO TECHNOLOGIES, INC.
TITLE
UNION TAILPIECE - NPT
A
B
MATERIAL
LF BRASS - GB HSi75-3
FINISH / POST-TREATMENT
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of
Flo Technologies, Inc. Any reproduction or redistribution without
the written permission of Flo Technologies is prohibited.
UNLESS NOTED OTHERWISE
1. ALL DIMENSIONS ARE IN mm
2. DEFAULT TOLERANCING:
BASIC VALUE TOLERANCE
X ± 0.50
.X ± 0.25
.XX ± 0.13
ANGLES: ± 1/2°
SURFACE FINISH: 1.6 μm Ra
CONCENTRICITY: .25 mm TIR
DATE
1 : 1
30.5
26.9
32.28
32.03
Ø
16.3
2.4
3.5
3/4 - 14 NPT
L1, L3 GAUGING COMPLIANCE REQUIRED
30.5
R.38
NOTES:
1. WETTED COMPONENT - NSF 61 SECTION 8 APPLICATION.
SUBSTITUTION OF SUPPLIER, ALLOY OR PROCESS PROHIBITED WITHOUT FLO ENGINEERING OFFICIAL APPROVAL.
2. MANUFACTURING PROCESS:
MACHINED FORGING. DO NOT DIRECTLY MACHINE FROM EXTRUDED OR CONTINUOUS CAST ROD BLANKS.
THIS IS IMPORTANT TO ACHIEVE UNIFORM GRAIN STRUCTURE FOR BEST MECHANICAL PROPERTIES.
3. CERTIFICATION OF CORROSION RESISTIANCE:
FINISHED COMPONENT SHALL MEET TYPE 2 DR CLASSIFICATION CRITERIA WHEN TESTED PER AUSTRALIAN STANDARD AS 2345.
FINISHED COMPONENT SHALL NOT SHOW FORMATION OF STRESS CRACKS WHEN TESTED PER ASTM B858 WHEN TESTED WITH ASTM B16.22
COMPLIANT, UNS C12200 ALLOY PIPE PLUGS INSTALLED. PLUG SHALL HAVE 1 TO 2 WRAPS OF TEFLON SEALING TAPE. PLUG SHALL BE
INSTALLED TWO FULL TURNS PAST HAND TIGHT.
4. PART MUST BE CLEAN AND FREE OF OIL.
5. UNLESS SPECIFIED OTHERWISE, BREAK ALL CORNERS. NO BURRS PERMISSIBLE.
6. ROD CHEMICAL COMPOSITION:
35.03
34.83
32.28
32.00
(
)
REVISION HISTORY
REV DESCRIPTION BY DATE APPROVED
ANEW PART ISSUE JAS 3/11/2019 HH
Chemical Composition (%)
Alloy Cd Cu* Fe Mn Ni** PPb Si Sn Zn
HSi75-3 0.01 max 73.0-77.0 0.10 max .10 max .10 max .04 - .15 .10 max 2.7 - 3.4 .20 max remainder
* Cu value includes Ag. Cu + Sum of Named Elements 99.5% minimum
** Ni value includes Co
45°
45°
45°
TYP
32.28
32.00
R5
Tailpieces (Included)
SECTION B-B
SCALE 1 : 1
SECTION C-C
SCALE 1 : 1
B B
C
C
DRAWN BY
JAS
APPROVED
HH
3/11/2019
3/11/2019
SIZE SCALE
DWG NO
430-00023
REV
SHEET
1
OF
1
DATE
FLO TECHNOLOGIES, INC.
TITLE
UNION TAILPIECE - NPT
A
B
MATERIAL
LF BRASS - GB HSi75-3
FINISH / POST-TREATMENT
PROPRIETARY AND CONFIDENTIAL
The information contained in this document is the sole property of
Flo Technologies, Inc. Any reproduction or redistribution without
the written permission of Flo Technologies is prohibited.
UNLESS NOTED OTHERWISE
1. ALL DIMENSIONS ARE IN mm
2. DEFAULT TOLERANCING:
BASIC VALUE TOLERANCE
X ± 0.50
.X ± 0.25
.XX ± 0.13
ANGLES: ± 1/2°
SURFACE FINISH: 1.6 μm Ra
CONCENTRICITY: .25 mm TIR
DATE
1 : 1
30.5
26.9
32.28
32.03
Ø
16.3
2.4
3.5
3/4 - 14 NPT
L1, L3 GAUGING COMPLIANCE REQUIRED
30.5
R.38
NOTES:
1. WETTED COMPONENT - NSF 61 SECTION 8 APPLICATION.
SUBSTITUTION OF SUPPLIER, ALLOY OR PROCESS PROHIBITED WITHOUT FLO ENGINEERING OFFICIAL APPROVAL.
2. MANUFACTURING PROCESS:
MACHINED FORGING. DO NOT DIRECTLY MACHINE FROM EXTRUDED OR CONTINUOUS CAST ROD BLANKS.
THIS IS IMPORTANT TO ACHIEVE UNIFORM GRAIN STRUCTURE FOR BEST MECHANICAL PROPERTIES.
3. CERTIFICATION OF CORROSION RESISTIANCE:
FINISHED COMPONENT SHALL MEET TYPE 2 DR CLASSIFICATION CRITERIA WHEN TESTED PER AUSTRALIAN STANDARD AS 2345.
FINISHED COMPONENT SHALL NOT SHOW FORMATION OF STRESS CRACKS WHEN TESTED PER ASTM B858 WHEN TESTED WITH ASTM B16.22
COMPLIANT, UNS C12200 ALLOY PIPE PLUGS INSTALLED. PLUG SHALL HAVE 1 TO 2 WRAPS OF TEFLON SEALING TAPE. PLUG SHALL BE
INSTALLED TWO FULL TURNS PAST HAND TIGHT.
4. PART MUST BE CLEAN AND FREE OF OIL.
5. UNLESS SPECIFIED OTHERWISE, BREAK ALL CORNERS. NO BURRS PERMISSIBLE.
6. ROD CHEMICAL COMPOSITION:
35.03
34.83
32.28
32.00
(
)
REVISION HISTORY
REV DESCRIPTION BY DATE APPROVED
ANEW PART ISSUE JAS 3/11/2019 HH
Chemical Composition (%)
Alloy Cd Cu* Fe Mn Ni** PPb Si Sn Zn
HSi75-3 0.01 max 73.0-77.0 0.10 max .10 max .10 max .04 - .15 .10 max 2.7 - 3.4 .20 max remainder
* Cu value includes Ag. Cu + Sum of Named Elements 99.5% minimum
** Ni value includes Co
45°
45°
45°
TYP
32.28
32.00
R5
0.75 in
NPT
SPECIFICATIONS
10/22 FOR MORE INFORMATION CALL: 1-844-633-8356
moen.com
-
1
Moen 900-001 is a smart home water monitoring and leak detection system that provides remote, automatic, and manual water on/off capability. With its WiFi connectivity, you can use the smartphone app to receive proactive maintenance alerts, remotely control and shut off the water, set water consumption goals, monitor water usage, set system modes, and see real-time flow, pressure, and temperature readings. It works with Amazon Alexa, Google Assistant, Alarm.com, and Ring.com.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Moen 900-001 Specification
-
Moen 900-001 Flo by Smart Home Water Monitoring and Leak Detection System User manual
-
Moen 900-002 Specification
-
Moen 930-003 NPT, 930-004 Solder Smart Water Network Installation guide
-
-
Moen 930-004 Owner's manual
-
-
Moen 920-005 Specification
-
Other documents
-
US Water Systems Flexx Oxi-Gen FX-250 Owner's manual
-
Pentair Pool IntelliFlo3 and IntelliPro3 VSF Pool Pump Installation guide
-
trutankless TR20 Operating instructions
-
STA-RITE IntelliFlo3 and IntelliPro3 VSF Pool Pump User guide
-
Watts Premier 43000140 User manual
-
EcoWater ERO-375 Owner's manual
-
Hotpoint HQ9I MO1L UK User guide
-
Whirlpool WQ9I HO1X User guide
-
Caleffi NA10702 Operating instructions
-
Whirlpool WQ9I MO1L User guide
