2. Crystorama
  3. 8101-PN

Crystorama 8101-PN User manual

  • I've reviewed the assembly instructions for the Crystorama Wall Light 8101-PN. This document covers the steps to install the wall light and includes cautions about electrical safety. It also specifies the type of bulb to use and recommends LED bulbs for extended use. I'm ready to help with your questions.
  • What type of bulb is required?
    Are bulbs included with the fixture?
    Is this fixture suitable for wet locations?
    Are LED bulbs recommended?
How to Install
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
®
You will need 1-Candelabra Bulb
60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
1.Attach the fixture onto the outlet box in the wall.
2.Put the shade on the candle sleeve and secure it in
place using the socket ring.
3.Install the recommended bulb into the socket and
screw the crystal drop into the bottom.
4.After connecting the wires, fix the back plate on
the mounting plate with screws.
6″
4.5″7.5″
2.9″14″
Ø5″
5.8″
ASSEMBLY INSTRUCTION MODEL #8101-PN
crystorama.com
Part Number
Part Numbers
A
B
C
E
F
PART NUMBER MODEL #8101-PN
A.Mounting Hardware
(1)Mounting Plate
(2)Mounting Screws
(3)Wire Nut
(4)Screws
B.(1)Back plate;4.5″x6″x0.63″h;XMO8101PNBKP6IN
C.(1)Crystal drop
E.(1)Candle Sleeve
F.(1)Shade;Ø5"x5.8"h;XMO8101SHA6IN
D.(1)Crystal Column
D
crystorama.com
/