Minka-Lavery 3132-77 User manual

Brand: Minka-Lavery

Model: 3132-77

Type: User manual

Minka-Lavery 3132-77 is a ceiling-mounted light fixture designed to provide ample illumination in various indoor settings. It features a classic and elegant design that seamlessly blends with both traditional and contemporary décor styles. The fixture is crafted from high-quality materials, ensuring durability and longevity. With its adjustable chain, it allows for customization of hanging height to suit different ceiling heights and room sizes.

The Minka-Lavery 3132-77 is equipped with multiple sockets, enabling the use of multiple light bulbs. This allows you to adjust the brightness and ambiance of your space by choosing bulbs with different wattages and color temperatures. The fixture's open design ensures wide distribution of light, effectively illuminating even larger areas. Additionally, the crystal accents add a touch of sparkle and glamour to the fixture, creating a visually appealing focal point in your room.

INSTALLATION INSTRUCTION FOR FIXTURE 3132

ASSEMBLING THE FIXTURE (FIG.2)

1. Shut off the power at the fuse box or circuit breaker. If

necessary, remove the old fixture, including the mounting

hardware.

2. Carefully remove the fixture from the carton and check that all

parts are included as shown in the illustration.

3. Thread one end of the nipple (J) tightly into the coupling (K).

4. Insert the bracket (M) over the other end of the nipple (J), then

secure tightly with the fixture loop (A).

5. Connect one end of the crystal chain (F) to the hole (C), and the

other end to the small ring (L);

6. Insert the candle cover (H) over the socket (I), then place the

fabric shade (G) over the candle cover (H).

7. Install the light bulb in accordance with fixture’s specifications.

(DO NOT EXCEED THE MAXMUM WATTAGE RATING!) (NE

PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

Hook the crystal drop (E) to the small ring (B), (D).

MOUNTING THE FIXTURE (FIG.1)

1, Thread the nipple (Q) into the collar loop (R) until snug.

2, Thread the other end of nipple (Q) tightly into the cross bar (N).

3, Place lock washer (O) over the end of nipple (Q) protruding

through cross bar (N) and thread hex nut (P) onto nipple (Q) until

tight.

4, Take this crossbar assembly and mount to ceiling outlet box (T)

using outlet box screws (U) tightly. The side of cross bar marked

with “GND” must face out.

5, Use proper chain pliers to open one end link of the chain and

connect to the fixture loop (A). Close the link.

6, By measuring, determine the correct number of links needed for

proper hanging height. Using pliers, disconnect and discard

the remaining chain.

7, Carefuly lace the fixture wires through the chain (V).

8, Slip collar ring (W) over the chain (V), then do the same with

canopy (S).

9, Open the other end link of the chain (V) and connect to the collar

loop (R). Close the link.

10, Feed the fixture wires through the collar loop (R) and nipple (Q)

and pull until tight.

CONNECTING THE WIRE (See fig.3)

1. At this point, connect the electrical wires as shown in Fig. 3,

making sure that all wire connectors are secured. If your outlet

box has a ground wire (green or bare copper), connect the

fixture’s ground wire to it. Otherwise, connect the fixture’s

ground wire directly to the mounting plate using the green screw

provided. After wires are connected, tuck them carefully inside

the junction box.

2. Then raise the collar ring (W) and thread onto collar loop (R)

protruding through canopy.

Your installation is now complete. Return power to the junction box

and test the fixture.

Notice: It is important to use proper chain pliers (not

included) to OPEN and CLOSE the chain included with

this fixture. Do not open them with other tools that may

twist or stress the chain links. It is important to use proper

chain pliers like the ones shown in the diagram.

FIXTURE LOOP(A)

COUPLING(K)

NIPPLE(J)

HOLE(C)

SMALL RING(B)

SMALL RING(L)

(M)BRACKET

SMALL RING(D)

CRYSTAL CHAIN(F)

CRYSTAL DROP(E)

Fig. 2

FIXTURE LOOP(A)

Fig. 1

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Minka-Lavery 3132-77 User manual

Minka-Lavery 3132-77 User manual

Minka-Lavery 3132-77 User manual

Related papers

Other documents