2. Conrad
  3. 2638156
2638156

Conrad 2638156 User manual

  • Hello, I'm your chat assistant and I've reviewed the dismantling instructions for the LED Work Light model 2638156. This document outlines the steps to safely take apart the device, including disconnecting from the power supply, and removing components like the light source and front panel. If you have any questions about this process or the device, feel free to ask.
  • What is the first step in dismantling the LED work light?
    How many housing cover screws need to be removed?
    How many light source board screws have to be unscrewed?
1
Dismantling Instructions
LED Work Light
Item no: 2638156
1 Dismantling recommendations
■Disconnect from power supply.
■Ask help from a professional if needed.
2 Dismantling instructions
Step 1
Unscrew 6x housing cover screws.
Step 2
Remove the front panel.
Step 3
Unsolder the connection between the power cord and light board.
Step 4
Unscrew 4x light source board screws.
Step 5
Remove the light source.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2638156_V1_0323_hs_en 807056395 I1/O1 en
/