ODYSSEY® Performance (ODP) Automotive
Designed and engineered specically for automotive type applications and footprints,
ODYSSEY® Performance (ODP) batteries will easily handle the increasing demands of Start-Stop and
onboard accessories, supplying twice the power and three-times the life of conventional batteries.
Automotive
Light
Commercial
Truck, Bus
& Utility
Typical applications but can be used for many others where size and tments allow.
Genset &
Industrial
Model Code (All 12V)
Previous code shown in brackets ( )
CCA(1)
A
Nominal
Capacity
PHCA(2)
(5 sec.)
Reserve
Capacity
Minutes
Maximum Dimensions
Weight
kg Terminal
Terminal
Position
Operating
Temperature Range
(20 Hr
Rate-Ah)
Length
mm
Width
mm
Height
mm
ODP-AGM75 86 (75/86-705) 708A 49Ah 110 0 89 240 180 202 19.7 SAE & Side C -40°C to +60°C
ODP-AGM96R (96R-600) 600A 52Ah 110 0 90 242 175 176 18.3 SAE A -40°C to +60°C
ODP-AGM25 (25-675) 675A 59Ah 1200 11 7 242 176 219 20.8 SAE B -40°C to +60°C
ODP-AGM35 (35-675) 675A 59Ah 1200 11 7 242 176 219 20.8 SAE A -40°C to +60°C
ODP-AGM34 (34-790) 792A 61Ah 1500 124 275 172 199 21.1 SAE B -40°C to +60°C
ODP-AGM34R (34R-790) 792A 61Ah 1500 124 275 172 199 21.1 SAE A -40°C to +60°C
ODP-AGM78 (78-790) 792A 61Ah 1500 124 275 178 187 21.4 Side D -40°C to +60°C
ODP-AGM47 H5 L2 (47-650 (LN2-H5)) 650A 62Ah 11 5 0 105 242 175 189 19.0 SAE A -40°C to +60°C
ODP-AGM24 (24-725) 725A 63Ah 1300 155 276 172 225 23.3 SAE B -40°C to +60°C
ODP-AGM24F (24F-725) 725A 63Ah 1300 155 276 172 225 23.3 SAE A -40°C to +60°C
ODP-AGM65 (65-760) 762A 64Ah 1500 129 301 183 192 22.6 SAE B -40°C to +60°C
ODP-AGM48 H6 L3 (48-720 (LN3-H6)) 720A 69Ah 1250 130 277 174 189 21.8 SAE A -40°C to +60°C
ODP-AGM94R H7 L4 (94R-850 (LN4-H7)) 850A 80Ah 1500 155 315 174 189 24.9 SAE A -40°C to +60°C
ODP-AGM27 (27-850) 850A 85Ah 1500 182 316 172 225 27.1 SAE B -40°C to +60°C
ODP-AGM27F (27F-850) 850A 85Ah 1500 182 316 172 225 27.1 SAE A -40°C to +60°C
ODP-AGM49 H8 L5 (49-950 (LN5-H8)) 950A 94Ah 1700 180 353 174 189 28.5 SAE A -40°C to +60°C
ODP-AGM31 (31-925S) 925A 100Ah 1750 200 330 172 243 31.5 3/8-16" Stud F -40°C to +60°C
ODP-AGM31A (31-925T) 925A 100Ah 1750 200 330 172 240 31.5 SAE F -40°C to +60°C
ODP-AGMDINB (629-DIN B-1300) 1300A 170Ah 2400 370 518 223 218 53.2 SAE I -40°C to +50°C
ODP-AGMDINC 1250A 215Ah 2300 450 517 275 241 64.7 SAE I -40°C to +65°C
ODP-ACEDINC 1250A 215Ah 2300 450 517 275 241 64.7 SAE I -40°C to +65°C
625-DIN C-1500 1500A 220Ah 2700 475 518 276 242 64.9 SAE I -40°C to +60°C
(1)CCA-Cold Start Performance in accordance with SAE J537 (2)PHCA-Pulse Current. All dimensions are nominal unless stated otherwise - please refer to eu.odysseybattery.com for other dimensions.
TERMINAL POSITIONS #
SAE AND DIN POSTS
These are posts in the shape of truncated cones with
slightly dierent diameters to indicate polarity, as in the
examples below:
STUD POSTS
These terminals have a stud posts with various threads
as specied for each battery, examples below:
SAE 3/8-16” FEMALE THREAD
This is an SAE post which can
be installed on female M6
terminals. The SAE post has a
3/8 16” female threaded insert.
SIDE 3/8-16” FEMALE THREAD
Side terminals are
normally supplied in
addition to top
terminals and allow
the xing of other
connections to
power accessories or
auxiliary items.
M6 AND M4 FEMALE THREAD
This type of terminal consists of a female thread which
can take various adapters/terminals with an M6 or M4
thread as specied for each battery.
Terminal Types Explained*
# For exact dimensions and terminal details for each battery please refer to eu.odysseybattery.com
17.7mm ±0.2 19.3mm ±0.2
15.6mm ±0.2 17.2mm ±0.2
Negative Positive
(1)
Terminal Types Explained
SAE AND DIN POSTS These are posts in the shape of truncated cones with
slightly different diameters to indicate polarity, as in the examples below:
SAE 3/8-16” FEMALE THREAD
This is an SAE post which can be installed
on female M6 terminals. The SAE post
has a 3/8-16” female threaded insert.
STUD POSTS These terminals have a stud posts with various threads
as specified for each battery, examples below:
18.6mm ±0.2
(ODP-AGM31A
Height =17.3mm±0.2)
FEMALE THREAD This type of terminal consists of a female thread
which can take various adapters/terminals with an M6 or M4 thread as
specified for each battery. 'L' Bracket adaptor kit with M6
female Thread
SIDE 3/8-16” FEMALE THREAD
Side terminals are normally supplied
in addition to top terminals and allow
the fixing of other connections to
power accessories or auxiliary items.
(1)For exact dimensions and terminal details for each battery please refer to the ODYSSEY Battery Owner's Manual which can be found on the website eu.odysseybattery.com
M6 Thread
Remove
this centre
black line
17.7mm ±0.2 19.3mm ±0.2
15.6mm ±0.2 17.2mm ±0.2
Negative Positive
(1)
Terminal Types Explained
SAE AND DIN POSTS These are posts in the shape of truncated cones with
slightly different diameters to indicate polarity, as in the examples below:
SAE 3/8-16” FEMALE THREAD
This is an SAE post which can be installed
on female M6 terminals. The SAE post
has a 3/8-16” female threaded insert.
STUD POSTS These terminals have a stud posts with various threads
as specified for each battery, examples below:
18.6mm ±0.2
(ODP-AGM31A
Height =17.3mm±0.2)
FEMALE THREAD This type of terminal consists of a female thread
which can take various adapters/terminals with an M6 or M4 thread as
specified for each battery. 'L' Bracket adaptor kit with M6
female Thread
SIDE 3/8-16” FEMALE THREAD
Side terminals are normally supplied
in addition to top terminals and allow
the fixing of other connections to
power accessories or auxiliary items.
(1)For exact dimensions and terminal details for each battery please refer to the ODYSSEY Battery Owner's Manual which can be found on the website eu.odysseybattery.com
M6 Thread
Remove
this centre
black line
PC1220 & PC1350
34M-PC1500 & 31M-PC215075/86-PC1230
25-PC1400
35-PC1400
34-PC1500
34R-PC1500
34/78-PC1500
65-PC1750
31-PC2150T
75/86-PC1230
34/78-PC1500
PC2250
31-PC2150S
A. 18.2mm MAX
B. 24.5mm MAX
18.59mm 14.43mm
POSITIVE MARINE STUD
3/8-16 THREAD
NEGATIVE MARINE STUD
5/16-18 UNC THREAD
POSITIVE SAE
TERMINAL
NEGATIVE SAE
TERMINAL
14.43mm 18.59mm
B
A
NTS
18.8mm
3/8-16 UNC
THREAD
PC1800-FT
(FRONT TERMINAL)
POSITIVE
TOP TERMINALS SIDE TERMINAL
Front Stud
with M10 Thread
19.5mm
17.5mm
1.0mm
17.0mm
16.0mm
17.9mm
17.0mm
1.0mm
NEGATIVE
POSITIVE
18.6mm
17.2mm
19.3mm
NEGATIVE
18.6mm
15.6mm
17.7mm
3/8-16 UNC-2B
8.6mm DEEP
21.6mm
28.5mm
DIN TERMINAL 3/8-16 UNC THREAD
(SEE 'OPTIONAL SAE TERMINALS' FOR DETAILS)
PC535 and PC625ALL OTHER MODELS
34R-PC1500
POSITIVE NEGATIVE
18.6mm
17.2mm
19.3mm
18.6mm
15.6mm
17.7mm
OPTIONAL SAE TERMINAL
(INSTALLED ON FEMALE M6 TERMINALS)
17.7mm ±0.2 19.3mm ±0.2
15.6mm ±0.2 17.2mm ±0.2
Negative Positive
(1)
Terminal Types Explained
SAE AND DIN POSTS These are posts in the shape of truncated cones with
slightly different diameters to indicate polarity, as in the examples below:
SAE 3/8-16” FEMALE THREAD
This is an SAE post which can be installed
on female M6 terminals. The SAE post
has a 3/8-16” female threaded insert.
STUD POSTS These terminals have a stud posts with various threads
as specified for each battery, examples below:
18.6mm ±0.2
(ODP-AGM31A
Height =17.3mm±0.2)
FEMALE THREAD This type of terminal consists of a female thread
which can take various adapters/terminals with an M6 or M4 thread as
specified for each battery. 'L' Bracket adaptor kit with M6
female Thread
SIDE 3/8-16” FEMALE THREAD
Side terminals are normally supplied
in addition to top terminals and allow
the fixing of other connections to
power accessories or auxiliary items.
(1)For exact dimensions and terminal details for each battery please refer to the ODYSSEY Battery Owner's Manual which can be found on the website eu.odysseybattery.com
M6 Thread
Remove
this centre
black line
18mm
Pos. 19.5mm
Neg. 17. 9 mm
1:9
Taper
SIDE TERMINAL
3/8-16 UNC-2B
8.6mm DEEP
21.6mm
28.5 mm
M6 FEMALE
THREAD
‘L” Bracket adaptor kit with M6
female thread
3/8-16 FEMALE
THREAD BRASS SAE
TERMINAL
(SEE SAE
DIAGRAM FOR
DETAILS)
BATTERY
TERMINAL
(FEMALE M6)
A
B
C
D
F
G
J
E2
H
E
I
Drawing sizes are for terminal position reference only; diagrams are not proportionate to each other.
Stud with 3/8-16” Thread
Stud with M6 Thread