Installation Guide
www.wireless-tek.com
Username
Address
Telephone No.
Purchase Shop
Purchase Address
Product Model No.
Purchase Time
Serial No.
Dealer Signature
If the product defects within three months after purchase, we will provide you a new
product of the same model.
If the product defects within the three-year warranty period, we will provide the
professional maintenance service.
Proof of purchase and a complete product serial number are required to receive any
services guaranteed as part of the limited warranty.
Any other defects that are not caused by workmanship or product quality, such as
natural disaster, water damage, extreme thermal or environmental conditions. sticker
damaged, warranty card losing will disqualify the product from limited warranty.
Warranty Card
Installation Guide
WI-PS518G
www.wireless-tek.com
1×Installation Guide1×AC Power Cord
1 × WI-PS518GH
1. Package Contents
2×Wall Mount kit
2. Hardware Introduction
2.1 Front Panel
DIP Switch Description
Default
The transmission distance of PoE port can be up to 100m with
100Mbps, but the rate is limited to10Mbps and PoE Watchdog is
disable.
Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao'an street,
Baoan District,Shenzhen City, Guangdong, China
Website:www.wireless-tek.com
Tel:86-0755-32811290
Email:sales@wireless-tek.com
Technical Support:tech@wireless-tek.com
Company Website
Cloud Management
Technical Support
RoHS
100-240V AC
Fan
AC In Port
Grounding Interface
WI-PS518GH
VLAN All downlink ports are isolated from each other, but can
communicate with uplinkports, and PoE Watchdog is enabled.
CCTV
The transmission distance of PoE port can be up to 250m, but the
rate is limited to10Mbps，and VLAN mode and PoE Watchdog are
enabled.
LED Light
PoE Off: PoE not working
On: PoE is working
Link On: Data on TX/RX
Off: Ports link down
18T: On: Port 18 link up
Off: Port 18 link down
17T/17S On: Port 17T/17S link up
Off: Port 17T/17S link down
3. Hardware Installation
60W PoE
18-S FP
LAN Port WAN Port
AC Cord
IP Camera
PC
NVR
SFP Port
IP Camera
1.1 Take WI-PS518GH as an example.
Note: PoE Watchdog - All PoE ports enable PoE watchdog function, which can detect and reboot the offline compliant PoE powered devices.
WI-PS205H | WI-PS210H | WI-PS518GH | WI-PS526GH | WI-PS308GH
WI-PS309GFH | WI-PS318GFH | WI-PS326GFH | WI-PS305GH
Model
Interface
PoE Standard
PoE Ports
Power Budget
DIP Sw itch
WI-PS309GFH WI-PS318GFH WI-PS326GFH WI-PS305GH
8 1000Mbp s RJ45 Po E Ports
1 1000Mbp s RJ45 Po rts
1 1000Mbp s SFP Port
16 1000Mb ps RJ45 P oE Ports
2 1000Mbp s Combo
24 1000Mb ps RJ45 P oE Ports
2 1000Mbp s SFP Slots
4 1000Mbp s RJ45 Po E Ports
1 1000Mbp s RJ45 Po rt
802.3 af/at complian t PoE
Port 1-8 Port 1-16 Port 1-24 Port 1- 4
65W 45W
Default/VLAN/CCT V
Power Supply AC 100~240V 50/60Hz
PoE Watc hdo g Yes Yes Yes Yes
200W 280W
Default/VLAN/CCT VDefault/VLAN/CCT VDefault/VLAN/CCT V
Model
Interface
PoE Standard
PoE Ports
Power Budget
DIP Sw itch
WI-PS205H WI-PS210H WI-PS518GH WI-PS526GH WI - PS308GH
4 100Mbps R J45 PoE P orts
2 100Mbps R J45 Por ts
8 100Mbps R J45 PoE P orts
2 100Mbps R J45 Por ts
16 100Mbp s RJ45 Po E Ports
1 1000Mbp s RJ45 Po rt
1 1000Mbp s Combo
24 100Mbp s RJ45 Po E Ports
1 1000Mbp s RJ45 Po rt
1 1000Mbp s Combo
8 1000Mbp s RJ45 Po E Ports
2 1000Mbp s RJ45 Po rts
802.3 af/at complian t PoE
Port 1-4 Port 1-8 Port 1-16 Port 1-24
40W 200W 65W
Power Supply AC 100~240V 50/60Hz
PoE Watc hdo g Yes Yes Yes Yes Yes
Port 1-8
65W 150W
Default/VLAN/CCT VDefault/CCTVDefault/VLAN/CCTVDefault/VLAN/CCT VDefault/CCTV
16* 10/10 0Mbps +1G Com bo+1G E PoE Swi tch
2 4 6 8 10 12 16
1 3 5 7 9 11 13 15
14
18T
17T/ 17S
PoE Ma x
PWR
Default
VLAN
CCTV CCTV=250m PoE+VLAN
2 4 6 8 10 12 14 16 18T
1 3 5 7 9 11 13 15 17 T 17S
PoE
DATA LNK /ACT
16 100Mbps RJ45 PoE+ Ports
LED light
16* 10/10 0Mbps +1G Com bo+1G E PoE Swi tch
2 4 6 8 10 12 16
1 3 5 7 9 11 1 3 1 5
14
18T
17T/17S
PoE M ax
PWR
Defau lt
VLAN
CCTV CC TV=25 0m PoE+ VLAN
2 4 6 8 10 1 2 14 1 6 18T
1 3 5 7 9 11 13 1 5 17 T 17S
PoE
DATA LNK /ACT
DIP Switch 1 1000Mbps RJ45 Port
1 1000Mbps Combo Port
50/60Hz
PoE Max When total PoE output power > Power Budget * 80%, the LED
light will be ON.
Power On: The device power on is normal
Off: The device is power off or failed
